SIST EN ISO 19110:2006/A1:2011
(Amendment)Geographic information - Methodology for feature cataloguing - Amendment 1 (ISO 19110:2005/AMD 1:2011)
Geographic information - Methodology for feature cataloguing - Amendment 1 (ISO 19110:2005/AMD 1:2011)
This International Standard defines the methodology for cataloguing feature types. This International Standard specifies how the classification of feature types is organized into a feature catalogue and presented to the users of a set of geographic data. This International Standard is applicable to creating catalogues of feature types in previously uncatalogued domains and to revising existing feature catalogues to comply with standard practice. This International Standard applies to the cataloguing of feature types that are represented in digital form. Its principles can be extended to the cataloguing of other forms of geographic data.This International Standard is applicable to the definition of geographic features at the type level. This International Standard is not applicable to the representation of individual instances of each type. This International Standard excludes spatial, temporal, and portrayal schemas as specified in ISO 19107, ISO 19108, and ISO 19117, respectively. It also excludes collection criteria for feature instances.This International Standard may be used as a basis for defining the universe of discourse being modelled in a particular application, or to standardize general aspects of real world features being modelled in more than one application.
Geoinformation - Objektartenkataloge - Änderung 1 (ISO 19110:2005/AMD 1:2011)
Information géographique - Méthodologie de catalogage des entités - Amendement 1 (ISO 19110:2005/AMD 1:2011)
Geografske informacije - Metodologija za objektne kataloge - Dopolnilo 1 (ISO 19110:2005/AMD 1:2011)
Ta mednarodni standard opredeljuje metodologijo za tipe objektnih katalogov. Ta mednarodni standard določa, kako je organizirana klasifikacija objektnih tipov v objektne kataloge in predstavljena uporabnikom nizov geografskih podatkov. Ta mednarodni standard velja za oblikovanje tipov objektnih katalogov na predhodno nekatalogiziranih domenah in za revidiranje obstoječih objektnih katalogov, da ustrezajo standardni praksi. Ta mednarodni standard velja za katalogiziranje objektnih tipov, ki so predstavljeni v digitalni obliki. Njegova načela se lahko razširijo na katalogiziranje drugih oblik geografskih podatkov. Ta mednarodni standard velja za definicijo geografskih objektov na ravni tipa. Ta mednarodni standard ne velja za predstavitev posameznih primerov vsakega tipa. Ta mednarodni standard izključuje prostorske, časovne in opisne sheme, kot so določene v ISO 19107, ISO 19108 in ISO 19117 v tem zaporedju. Prav tako izključuje merila zbiranja primerov objektov. Ta mednarodni standard se lahko uporablja kot podlaga za opredeljevanje univerzuma diskurza, ki se modelira v določeni aplikaciji ali za standardizacijo splošnih vidikov objektov resničnega sveta, ki se modelirajo v več kot eni aplikaciji.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 19110:2006/A1:2011
01-september-2011
Geografske informacije - Metodologija za objektne kataloge - Dopolnilo 1 (ISO
19110:2005/AMD 1:2011)
Geographic information - Methodology for feature cataloguing - Amendment 1 (ISO
19110:2005/AMD 1:2011)
Geoinformation - Objektartenkataloge - Änderung 1 (ISO 19110:2005/AMD 1:2011)
Information géographique - Méthodologie de catalogage des entités - Amendement 1
(ISO 19110:2005/AMD 1:2011)
Ta slovenski standard je istoveten z: EN ISO 19110:2006/A1:2011
ICS:
07.040 Astronomija. Geodezija. Astronomy. Geodesy.
Geografija Geography
35.240.70 Uporabniške rešitve IT v IT applications in science
znanosti
SIST EN ISO 19110:2006/A1:2011 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 19110:2006/A1:2011
---------------------- Page: 2 ----------------------
SIST EN ISO 19110:2006/A1:2011
EUROPEAN STANDARD
EN ISO 19110:2006/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2011
ICS 35.240.70
English Version
Geographic information - Methodology for feature cataloguing -
Amendment 1 (ISO 19110:2005/AMD 1:2011)
Information géographique - Méthodologie de catalogage Geoinformation - Objektartenkataloge - Änderung 1 (ISO
des entités - Amendement 1 (ISO 19110:2005/AMD 19110:2005/AMD 1:2011)
1:2011)
This amendment A1 modifies the European Standard EN ISO 19110:2006; it was approved by CEN on 14 June 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19110:2006/A1:2011: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 19110:2006/A1:2011
EN ISO 19110:2006/A1:2011 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 19110:2006/A1:2011
EN ISO 19110:2006/A1:2011 (E)
Foreword
This document (EN ISO 19110:2006/A1:2011) has been prepared by Technical Committee ISO/TC 211
"Geographic information/Geomatics" in collaboration with Technical Committee CEN/TC 287 “Geographic
Information” the secretariat of which is held by BSI.
This Amendment to the European Standard EN ISO 19110:2006 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by December 2011, and
conflicting national standards shall be withdrawn at the latest by December 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 19110:2005/A1:2011 has been approved by CEN as a EN ISO 19110:2006/A1:2011 without
any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 19110:2006/A1:2011
---------------------- Page: 6 ----------------------
SIST EN ISO 19110:2006/A1:2011
INTERNATIONAL ISO
STANDARD 19110
First edition
2005-02-15
AMENDMENT 1
2011-06-15
Geographic information — Methodology
for feature cataloguing
AMENDMENT 1
Information géographique — Méthodologie de catalogage des entités
AMENDEMENT 1
Reference number
ISO 19110:2005/Amd.1:2011(E)
©
ISO 2011
---------------------- Page: 7 ----------------------
SIST EN ISO 19110:2006/A1:2011
ISO 19110:2005/Amd.1:2011(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2011
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2011 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 19110:2006/A1:2011
ISO 19110:2005/Amd.1:2011(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
Amendment 1 to ISO 19110:2005 was prepared by Technical Committee ISO/TC 211, Geographic
information/Geomatics.
© ISO 2011 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 19110:2006/A1:2011
ISO 19110:2005/Amd.1:2011(E)
Introduction
This amendment is based on experience in implementing ISO 19110:2005, experience and lessons learned
by the ISO 19126 project team, harmonization with other ISO/TC 211 standards, and in particular
establishment of an eXtensible Mark-up Language (XML) schema encoding for feature catalogues. This
amendment provides XML schemas that are meant to enhance interoperability by providing a common
specification for describing, validating, and exchanging feature catalogue information.
The changes in this amendment aim to:
facilitate the use of ISO 19110:2005 to create geographic feature catalogues;
ensure a consistent description of the feature types of an application schema;
enhance the compliance of ISO 19110:2005 with ISO 19109;
enable an XML schema implementation, based on ISO/TS 19139 encoding rules, of ISO 19110:2005-
compliant feature catalogues;
enable the registration of feature catalogues and their feature types.
iv © ISO 2011 – All rights reserved
---------------------- Page: 10 ----------------------
SIST EN ISO 19110:2006/A1:2011
ISO 19110:2005/Amd.1:2011(E)
Geographic information — Methodology for feature cataloguing
AMENDMENT 1
Page 1, Scope
Replace the entire clause with the following:
This International Standard defines the methodology for cataloguing feature types. This International
Standard specifies how feature types can be organized into a feature catalogue and presented to the
users of a set of geographic data. This International Standard is applicable to creating catalogues of
feature types in previously uncatalogued domains and to revising existing feature catalogues to comply
with standard practice. This International Standard applies to the cataloguing of feature types that are
represented in digital form. Its principles can be extended to the cataloguing of other forms of geographic
data. Feature catalogues are independent of feature concept dictionaries defined in ISO 19126 and can
be specified without having to use or create a feature concept dictionary.
This International Standard is applicable to the definition of geographic features at the type level. This
International Standard is not applicable to the representation of individual instances of each type. This
International Standard excludes portrayal schemas as specified in ISO 19117.
This International Standard can be used as a basis for defining the universe of discourse being modelled
in a particular application, or to standardize general aspects of real world features being modelled in more
than one application.
Page 1, Conformance
Replace the entire clause with the following:
Because this International Standard specifies a number of options that are not required for all feature
catalogues, this clause specifies five conformance classes. These classes are differentiated on the basis
of the following criteria.
a) Which elements of a feature type are required in a catalogue:
1) feature attributes only?
2) feature attributes and feature associations?
3) feature attributes, feature associations, and feature operations?
b) Is there a requirement for defining global feature attributes, feature associations, and feature
operations which may be bound to multiple feature types?
c) Is there a requirement to include inheritance relationships in the feature catalogue?
Annex A specifies a test module for each of the conformance classes, as shown in Table 1.
© ISO 2011 – All rights reserved 1
---------------------- Page: 11 ----------------------
SIST EN ISO 19110:2006/A1:2011
ISO 19110:2005/Amd.1:2011(E)
Table 1 — Conformance classes
Attributes, Inheritance
Attributes Attributes and
associations and Global properties relationships Test module
only associations
operations included
— — — — A.17
— — — — A.18
— — — — A.19
— — — — A.22
— — — A.23
— — — A.24
— — — A.25
NOTE The initial test module numbers are kept, even if some of the test modules are removed. The numbering can
be subject to change on publication of any new edition of this International Standard.
Page 2, Normative references
Update the entries for ISO/TS 19103:— and ISO 19109:—, delete footnote 1), and add ISO 19135:2005 and
ISO/TS 19139:2007:
ISO/TS 19103, Geographic information — Conceptual schema language
ISO 19109:2005, Geographic information — Rules for application schema
ISO 19135:2005, Geographic information — Procedures for item registration
ISO/TS 19139:2007, Geographic information — Metadata — XML schema implementation
Page 3, Terms and definitions
Replace entry 4.4 with the following:
feature catalogue
catalogue containing definitions and descriptions of the feature (4.1) types, feature attributes (4.3), and
feature relationships (4.8) occurring in one or more sets of geographic data, together with any feature
operations (4.5) that may be applied
[ISO 19101:2002, definition 4.13]
Add the following terms and definitions:
4.7
feature inheritance
mechanism by which more specific features (4.1) incorporate structure and behaviour of more general
features related by behaviour
4.8
feature relationship
feature association (4.2) or feature inheritance (4.7)
2 © ISO 2011 – All rights reserved
---------------------- Page: 12 ----------------------
SIST EN ISO 19110:2006/A1:2011
ISO 19110:2005/Amd.1:2011(E)
Page 3, Abbreviations
Add the following heading under "5 Abbreviations"
5.1 Acronyms
Add the following after the new 5.1:
5.2 Namespace abbreviations
In the list below, the item on the left describes the common namespace prefix used to describe the
elements in the namespace. The second item is an English description of the namespace prefix, and the
item in parenthesis is the URI of the actual namespace. These URIs do not correspond necessarily to an
effective location of the schemas.
This list corresponds to the namespaces used by this International Standard.
gco Geographic Common extensible markup language (http://www.isotc211.org/2005/gco)
gfc Geographic Feature Cataloguing (http://www.isotc211.org/2005/gfc.)
gmd Geographic MetaData extensible markup language (http://www.isotc211.org/2005/gmd)
gmx Geographic Metadata XML Schema (http://www.isotc211.org/2005/gmx)
Page 4, 6.1
Replace the text in 6.1 with the following:
A feature catalogue shall present the abstraction of reality represented in one or more sets of geographic
data. The basic level of abstraction in a feature catalogue shall be the feature type. A feature catalogue
shall be available in electronic form for any set of geographic data that contains features. A feature
catalogue may also comply with the specifications of this International Standard independently of any
existing set of geographic data.
Page 4, 6.2.1
Add the following text at the end of 6.2.1:
Annex E specifies XML encoding for feature catalogue, Annex F specifies concepts that permit the
management of feature catalogue either in a multi-part register or in a hierarchical register containing
multi-part subregisters, in accordance with ISO 19135. Annex G provides an example of XML
implementation of this International Standard.
Page 4, 6.2.2
Replace the first sentence of 6.2.2 with the following:
A template for the representation of feature catalogues is specified in Annex B.
© ISO 2011 – All rights reserved 3
---------------------- Page: 13 ----------------------
SIST EN ISO 19110:2006/A1:2011
ISO 19110:2005/Amd.1:2011(E)
Page 4, 6.2.3.1
Replace the text in 6.2.3.1 with the following:
All feature types and feature properties (i.e. feature attributes, feature associations, association roles, and
feature operations) included in a feature catalogue shall be identified by a name. The name of a feature
type is unique within that feature catalogue. The name of a feature property (whether the feature property
is a global property bound to the feature type or is local to the feature type) is unique within its feature
type. The name of a global feature property is unique within that feature catalogue.
Page 6, A.1
In the 2nd and 3rd paragraph, replace “Tables B.1 through B.15” with “Tables B.1 through B.16”.
Page 7, A.3
Replace bullet 2) with the following:
2) that all feature types, all feature association and all global feature properties (feature role, feature
attribute or feature operation not directly owned by a feature type) are identified by a name that is
unique within the feature catalogue,
Add the following bullet point after 6):
7) that all carriers of characteristics of a feature type are identified by a name that is unique in the
context of that feature type.
Page 8, A.7
Replace bullet b), with the following [deleting 1) and 2)]:
b) test method: test each attribute and role listed in Table B.5 (and Table B.4) by verifying that for
each the specified description, obligation/condition, maximum occurrence, type,
and constraint are satisfied;
Page 9, A.10
Replace bullet b) with the following:
b) test method: test each attribute and role listed in Table B.8 and Table B.4 by verifying that for
each the specified description, obligation/condition, maximum occurrence, type,
and constraint are satisfied;
Page 10, A.11
Delete bullet 2).
Page 12, A.19
Replace bullet b) with the following [deleting 1), 2) and 3)]:
b) test method: perform test module A.18 and test case A.7 (feature operation);
4 © ISO 2011 – All rights reserved
---------------------- Page: 14 ----------------------
SIST EN ISO 19110:2006/A1:2011
ISO 19110:2005/Amd.1:2011(E)
Page 13, A.22
Replace the text in A.22 with the following:
Information for the test module is as follows:
a) test purpose: verify that feature catalogue supports core representation functionality, comprised
of feature types, and feature properties (i.e. feature attributes, association roles,
and feature operations) either directly owned by a single feature type or globally
defined in the feature catalogue;
b) test method: perform test module A.8, A.16 and A.18;
c) reference: A.8, A.16 and A.18;
d) test type: capability.
Page 16, Annex B
In the first paragraph, replace “Tables B.1 through B.15” with “Tables B.1 through B.16”.
In the second paragraph, replace “Figure B.1” with “Figure B.1 a), b), and c)”.
1)
In the last line, delete “ISO 19109:— ” and insert “ISO 19109:2005”.
Page 17, Annex B
© ISO 2011 – All rights reserved 5
---------------------- Page: 15 ----------------------
SIST EN ISO 19110:2006/A1:2011
ISO 19110:2005/Amd.1:2011(E)
Replace Table B.1 with the following:
Table B.1 — Feature catalogue
Obligation/ Maximum
No. Name/Role Name Description Type Constraint
a b
Condition Occurrence
1 Class a feature catalogue contains — — — —
FC_FeatureCatalogue the definition of some number
of feature types with other
information necessary for
those definitions
Subtype of see ISO/TS 19139 — — — —
CT_Catalogue
1.1 Attribute name, address, country, and M 1 ISO 19115 Metadata:: —
producer telecommunications address CI_ResponsibleParty
of person or organization
having primary responsibility
for the intellectual content of
this feature catalogue
1.2 Attribute formal functional language in C/Mandatory if 1 CharacterString —
functionalLanguage which the feature operation feature
formal definition occurs in this operation
feature catalogue formal definition
occurs in
feature
catalogue
1.3 Role role that links this feature M N FC_FeatureType Aggregation
featureType catalogue to the feature types
that it contains
1.4 Role role that links this feature O N FC_DefinitionSource Aggregation
definitionSource catalogue to the sources of
definitions of feature types,
property types, and listed
values that it contains
1.5 Role role that links this feature O N FC_InheritanceRelation Aggregation
inheritanceRelation catalogue to the inheritance
relationships that it contains
1.6 Role role that links this feature O N FC_PropertyType Composition
globalProperty catalogue to the global feature
properties, i.e. the feature
properties which may be
bound to many feature types
a
M = mandatory; O = optional; C = conditional.
b
N = repeating occurrences.
6 © ISO 2011 – All rights reserved
---------------------- Page: 16 ----------------------
SIST EN ISO 19110:2006/A1:2011
ISO 19110:2005/Amd.1:2011(E)
Pages 18 and 19, Annex B
In Table B.2, replace rows 2, 2.9 and 2.11 with the following:
Obligation/ Maximum
No. Name/Role Name Description Type Constraint
a b
Condition Occurrence
2 Class class of real world — — — typeName
FC_FeatureType phenomena with common realizes
properties GF_FeatureType
::typeName;
isAbstract
realizes
GF_FeatureType
::isAbstract;
constrainedBy
realizes
GF_FeatureType
::constrainedBy
2.9 Role role that links this feature type O N FC_CarrierOfChara Composition
carrierOfCharacteristics to the property types that it cteristics
contains
2.11 Role role that links this feature type O 1 FC_DefinitionRefer Aggregation
definitionReference to the source of its definition ence
Page 19, Annex B
In Table B.3, replace row 3.1 with the following:
Obligation/ Maximum
No. Name/Role Name Description Type Constraint
Condition Occurrence
3.1 Attribute text string that uniquely O 1 CharacterString —
name identifies this inheritance
relation within the feature
catalogue that contains this
inheritance relation
Page 20, Annex B
Add the following Table B.4a before Table B.4.
Table B.4a — Carrier of characteristics
Obligation/ Maximum
No. Name/Role Name Description Type Constraint
a b
Condition Occurrence
4bis Class abstract class for local feature — — — —
FC_CarrierOfCharact properties and bound global
eristics properties of a feature type
4bis. Role role that links the local and C/Mandatory 1 FC_FeatureType —
1 featureType bound properties with the for local
feature type that contains properties
them
4bis. Role role that links a carrier of O N FC_Constraint Aggregation
2 constrainedBy characteristics to the
constraints placed upon it
a
O = optional; C = conditional.
b
N = repeating occurrences.
© ISO 2011 – All rights reserved 7
---------------------- Page: 17 ----------------------
SIST EN ISO 19110:2006/A1:2011
ISO 19110:2005/Amd.1:2011(E)
Page 20, Annex B
Update and extend Table B.4 with the following:
Table B.4 — Property type
Obligation/ Maximum
No. Name/Role Name Description Type Constraint
a
Condition Occurrence
4 Class abstract class for local and — — — —
FC_PropertyType global feature properties
Subtype of Table B.4a — — — —
FC_CarrierOfCharact
eristics
4.1 Attribute member name that locates M 1 LocalName —
memberName this member within a feature
type for a local property or
within the feature catalogue
for a global property
4.2 Attribute definition of the member in a C/Mandatory if 1 CharacterString —
definition natural language: This attribute not provided by
is required if the definition is definition source
not provided by
FC_FeatureCatalogue::definiti
onSource. If not provided, the
definitionReference should
specify a citation where the
definition may be found, and
any additional information as to
which definition is to be used
4.3 Attribute cardinality of the member in M 1 Multiplicity Initial value 1
cardinality the feature class. If this is an
attribute or operation, the
default cardinality is 1. If this
is an association role, then
the default cardinality is 0.*.
For operations, this is the
number of return values
possible.
This is an elaboration of the
GFM to allow for complete
specifications for various
programming and data
definition languages
4.6 Role role that links this instance to O 1 FC_DefinitionReferen Aggregation
definitionReference the source of its definition ce
4.7 Role feature catalogue to which a C/Mandatory 1 FC_FeatureCatalogue —
featureCatalogue global property pertains for a global
property
a
M = mandatory; O = optional; C = conditional.
8 © ISO 2011 – All rights reserved
---------------------- Page: 18 ----------------------
SIST EN ISO 19110:2006/A1:2011
ISO 19110:2005/Amd.1:2011(E)
Page 21, Annex B
In Table B.5, replace rows 5.3, 5.4 and 5.5 with the following:
Obligation/ Maximum
No. Name/Role Name Description Type Constraint
a b
Condition Occurrence
5.3 Role specifies attribute which may O N FC_Carrier Shall be instantiated as
triggeredByValues trigger an operation OfCharact FC_FeatureAttribute,
Of eristics FC_BoundFeatureAttribute or one
of their derived classes.
5.4 Role specifies attribute that may be O N FC_Carrier Shall be instantiated as
observesValuesOf used as input to perform an OfCharact FC_FeatureAttribute,
operation eristics FC_BoundFeatureAttribute or one
of their derived classes.
5.5 Role specifies attribute that will be O N FC_Carrier Shall be instantiated as
affectsValuesOf affected by an operation OfCharact FC_FeatureAttribute,
eristics FC_BoundFeatureAttribute or one
of their derived classes.
Page 21, Annex B
Replace Table B.6 with the following:
Name/Role Obligation/ Maximum
No. Description Type Constraint
a
Name Condition Occurrence
6 Class class that is used to describe the specifics of — — — —
FC_Binding how a property type is bound to a particular
feature type
Subtype of Table B.4a — — — —
FC_CarrierOfCh
aracteristics
6.1 Attribute description of how a property type is bound to O 1 CharacterString —
description a particular feature type
6.2 Role role that links to the bound global property M 1 FC_PropertyType —
globalProperty
a
M = mandatory; O = optional.
Page 22, Annex B
In Table B.8, replace rows 8.3 and 8.4 with the following:
Obligation/ Maximum
No. Name/Role Name Description Type Constraint
a b
Condition Occurrence
8.3 Attribute if present, it defines the permissible O 1 FC_ListedValue —
listedValue values of this feature attribute as a
restriction of the attribute valueType. If
not present, there is no restriction on
the valueType.
8.4 Attribute type of the value of this feature C/Mandatory 1 TypeName —
valueType attribute; a name from some for local feature
namespace attribute
© ISO 2011 – All rights reserved 9
---------------------- Page: 19 ----------------------
SIST EN ISO 19110:2006/A1:2011
ISO 19110:2005/Amd.1:2011(E)
Page 23, Annex B
In Table B.9, replace row 9.6 with the following:
Obligation/
Maximum
No. Name/Role Name Description Type Constraint
a
Occurrence
Condition
9.6 Role type of the target value of this C/Mandator 1 FC_Feature —
rolePlayer association role y for a local Type
association
role
Page 24, Annex B
In Table B.11, replace row 11.4 with the following:
Obligation/ Maximum
No. Name/Role Name Description Type Constraint
a
Condition Occurrence
11.4 Role role that links this instance to the O 1 FC_DefinitionReference Aggregation
definitionReference source of its definition
Page 24, Annex B
In Table B.12, replace row 12.1 with the following:
Obligation/ Maximum
Name/Role Name Description Type Constraint
a b
Condition Occurrence
12.1 Role roles that are a part of this M N FC_AssociationRole Composition
roleName association (minimum
occurrence:
2)
10 © ISO 2011 – All rights reserved
---------------------- Page: 20 ----------------------
SIST EN ISO 19110:2006/A1:2011
ISO 19110:2005/Amd.1:2011(E)
Page 25, Annex B
Replace Table B.15 with the following:
Table B.15 — Bound feature attribute
Obligation/ Maximum
No. Name/Role Name Description Type Constraint
a
Condition Occurrence
15 Class class that is used to describe — — — —
FC_BoundFeatureAttribute the specifics of how a global
feature attribute is bound to a
particular feature type
Subtype of FC_Binding Table B.6 — — — —
15.1 Attribute type of the value of this C/Mandatory 1 TypeName —
valueType feature attribute; a name from if the value
some namespace type of the
feature
attribute is not
defined
globally
a
C = conditional.
Page 25, Annex B
Insert Table B.16 after Table B.15:
Table B.16 — Bound association role
Obligation/ Maximum
No. Name/Role Name Description Type Constraint
a
Condition Occurrence
16 Class class that is used to describe — — — —
FC_BoundAssociationRole the specifics of how a global
association role is bound to a
particular feature type
Subtype of FC_Binding Table B.6 — — — —
16.1 Role target feature type of this C/Mandatory if 1 FC_FeatureType —
rolePlayer association role the target
feature type
of this
association
role is not
defined
globally
a
C = conditional.
© ISO 2011 – All rights reserved 11
---------------------- Page: 21 ----------------------
SIST EN ISO 19110:2006/A1:2011
ISO 19110:2005/Amd.1:2011(E)
Pages 26 to 30, Annex B
Replace Figures B.1 to B.5 with the following.
<>
CT_Catalogue
(from Catalogues)
+ name : CharacterString
+ scope[1.*] : CharacterString
+ fieldOfApplication[0.*] : CharacterString
+inheritanceRelation
<>
+ versionNumber : CharacterString
FC_InheritanceRelation
+ versionDate : Date 0.*
+ language[0.1] : CharacterString
+ name[0.1] : CharacterString
+inheritsFrom
+ characterSet[0.1] : MD_CharacterSetCode = “utf8”
+ description : CharacterString
+ locale[0.*] : PT_Locale 0.*
+ uniqueInstance : Boolean
+inheritsTo 0.*
Specialization
<>
FC_FeatureCatalogue
+ producer : CI_ResponsibleParty Generalization
1 +subtype
+ functionalLanguage[0.1] : CharacterString
<>
1
+featureCatalogue 1 +featureType
FC_FeatureType
+supertype
1.*
ConsistsOf
+ typeName : LocalName
<>
+ definition[0.1] : CharacterString
FC_CarrierOfCharacteristics
+rolePlayer
+carrierOfCharacteristics 0.1
+ code[0.1] : CharacterString
0.* +featureType + isAbstract : Boolean = FALSE
0.1
Member Of
+ aliases[0.*] : LocalName
<>
FC_PropertyType
<>
FC_FeatureAssociation
+ memberName : LocalName
+ definition[0.1] : CharacterString
+ cardinality : Multiplicity = 1
+relation
Role
<>
2.*
FC_AssociationRole
+roleName
+ isOrdered : Boolean = FALSE
+ isNavigable : Boolean = TRUE
<>
<>
FC_FeatureAttribute
FC_RoleType
if count(featureType)=1 then
+ code[0.1] : CharacterString
+ ordinary
rolePlayer is mandatory
+ valueMeasurementUnit[0.1] : UnitOfMeasure
+ aggregation
+ valueType[0
...
SLOVENSKI STANDARD
oSIST EN ISO 19110:2006/prA1:2009
01-november-2009
Geografske informacije - Metodologija za objektne kataloge - Dopolnilo 1 (ISO
19110:2005/DAM 1:2009)
Geographic information - Methodology for feature cataloguing - Amendment 1 (ISO
19110:2005/DAM 1:2009)
Geoinformation - Objektartenkataloge - Änderung 1 (ISO 19110:2005/DAM 1:2009)
Information géographique - Méthodologie de catalogage des entités - Amendement 1
(ISO 19110:2005/DAM 1:2009)
Ta slovenski standard je istoveten z: EN ISO 19110:2006/prA1
ICS:
07.040 Astronomija. Geodezija. Astronomy. Geodesy.
Geografija Geography
35.240.70 Uporabniške rešitve IT v IT applications in science
znanosti
oSIST EN ISO 19110:2006/prA1:2009 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST EN ISO 19110:2006/prA1:2009
---------------------- Page: 2 ----------------------
oSIST EN ISO 19110:2006/prA1:2009
EUROPEAN STANDARD
DRAFT
EN ISO 19110:2006
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
July 2009
ICS 35.240.70
English Version
Geographic information - Methodology for feature cataloguing -
Amendment 1 (ISO 19110:2005/DAM 1:2009)
Information géographique - Méthodologie de catalogage Geoinformation - Objektartenkataloge - Änderung 1 (ISO
des entités - Amendement 1 (ISO 19110:2005/DAM 19110:2005/DAM 1:2009)
1:2009)
This draft amendment is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee CEN/TC 287.
This draft amendment A1, if approved, will modify the European Standard EN ISO 19110:2006. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19110:2006/prA1:2009: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST EN ISO 19110:2006/prA1:2009
EN ISO 19110:2006/prA1:2009 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
oSIST EN ISO 19110:2006/prA1:2009
EN ISO 19110:2006/prA1:2009 (E)
Foreword
This document (EN ISO 19110:2006/prA1:2009) has been prepared by Technical Committee ISO/TC 211
"Geographic information/Geomatics" in collaboration with Technical Committee CEN/TC 287 “Geographic
Information” the secretariat of which is held by NEN.
This document is currently submitted to the parallel Enquiry.
Endorsement notice
The text of ISO 19110:2005/DAM 1:2009 has been approved by CEN as a EN ISO 19110:2006/prA1:2009
without any modification.
3
---------------------- Page: 5 ----------------------
oSIST EN ISO 19110:2006/prA1:2009
---------------------- Page: 6 ----------------------
oSIST EN ISO 19110:2006/prA1:2009
DRAFT AMENDMENT ISO 19110:2005/DAmd 1
ISO/TC 211 Secretariat: SN
Voting begins on: Voting terminates on:
2009-07-09 2009-12-09
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Geographic information — Methodology for feature cataloguing
AMENDMENT 1
Information géographique — Méthodologie de catalogage des entités
AMENDEMENT 1
ICS 35.240.70
ISO/CEN PARALLEL PROCESSING
This draft has been developed within the International Organization for Standardization (ISO), and
processed under the ISO-lead mode of collaboration as defined in the Vienna Agreement.
This draft is hereby submitted to the ISO member bodies and to the CEN member bodies for a parallel
five-month enquiry.
Should this draft be accepted, a final draft, established on the basis of comments received, will be
submitted to a parallel two-month approval vote in ISO and formal vote in CEN.
In accordance with the provisions of Council Resolution 15/1993 this document is circulated in
the English language only.
Conformément aux dispositions de la Résolution du Conseil 15/1993, ce document est distribué
en version anglaise seulement.
To expedite distribution, this document is circulated as received from the committee secretariat.
ISO Central Secretariat work of editing and text composition will be undertaken at publication
stage.
Pour accélérer la distribution, le présent document est distribué tel qu'il est parvenu du
secrétariat du comité. Le travail de rédaction et de composition de texte sera effectué au
Secrétariat central de l'ISO au stade de publication.
THIS DOCUMENT IS A DRAFT CIRCULATED FOR COMMENT AND APPROVAL. IT IS THEREFORE SUBJECT TO CHANGE AND MAY NOT BE
REFERRED TO AS AN INTERNATIONAL STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS BEING ACCEPTABLE FOR INDUSTRIAL, TECHNOLOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT, WITH THEIR COMMENTS, NOTIFICATION OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPORTING DOCUMENTATION.
©
International Organization for Standardization, 2009
---------------------- Page: 7 ----------------------
oSIST EN ISO 19110:2006/prA1:2009
ISO 19110:2005/DAmd 1
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall
not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the
unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
Copyright notice
This ISO document is a Draft International Standard and is copyright-protected by ISO. Except as permitted
under the applicable laws of the user's country, neither this ISO draft nor any extract from it may be
reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, photocopying,
recording or otherwise, without prior written permission being secured.
Requests for permission to reproduce should be addressed to either ISO at the address below or ISO's
member body in the country of the requester.
ISO copyright office
Case postale 56 CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Reproduction may be subject to royalty payments or a licensing agreement.
Violators may be prosecuted.
©
ii ISO 2009 – All rights reserved
---------------------- Page: 8 ----------------------
oSIST EN ISO 19110:2006/prA1:2009
ISO 19110:2005/FDAM 1:2009(E)
Contents Page
Foreword .v
Introduction.vi
1 Scope.1
2 List of changes .1
2.1 Revised Scope .1
2.2 Revised conformance clause.2
2.3 Revised Normative references.2
2.4 Revised Terms and Definitions.2
2.5 Revised Abbreviations.3
2.6 Revised 6.1.3
2.7 Revised 6.2.2.3
2.8 Revised form of names.3
2.9 Revised test modules.3
2.9.1 Revision of test module A.3 .3
2.9.2 Revision of test module A.7 .4
2.9.3 Revision of test module A.10 .4
2.9.4 Revision test module A.11.4
2.9.5 Revision of test module A.19 .4
2.9.6 Revision of test module A.22 .4
2.10 Revision of the Feature Catalogue Template (Annex B of ISO 19110:2005) .4
2.10.1 Revision of the conceptual schema .4
2.10.2 Revision of the data dictionary .11
2.11 Changes to informative annexes .18
3 Encoding description.20
3.1 Introduction.20
3.2 XML namespaces .20
3.3 gfc namespace.20
3.3.1 Organization of the gfc namespace.20
3.3.2 gfc.xsd .21
4 Management of feature catalogue registers.21
4.1 Introduction.21
4.2 Feature catalogue register as a subclass of RE_Register.21
4.2.1 Introduction.21
4.2.2 FR_FeatureCatalogueRegister.21
4.3 Subclasses of RE_RegisterItem for registering the content of a feature catalogue.22
4.3.1 Introduction.22
4.3.2 FR_RegisteredFeatureCatalogue.23
4.3.3 FR_RegisteredFeatureType.23
4.3.4 FR_RegisteredFeatureAttribute .23
4.3.5 FR_RegisteredFeatureOperation.23
4.3.6 FR_RegisteredAssociationRole.24
4.3.7 FR_RegisteredFeatureAssociation.24
4.3.8 FR_RegisteredInheritanceRelation.24
4.3.9 FR_RegisteredDefinitionSource .24
4.3.10 FR_RegisteredListedValue.25
4.4 Item classes for feature-related concepts .25
4.4.1 Introduction.25
4.4.2 Item class for feature catalogue registers .25
4.4.3 Item class for feature types.25
4.4.4 Item class for feature attributes.26
© ISO 2009 – All rights reserved iii
---------------------- Page: 9 ----------------------
oSIST EN ISO 19110:2006/prA1:2009
ISO 19110:2005/FDAM 1:2009(E)
4.4.5 Item class for feature operations . 26
4.4.6 Item class for association roles . 26
4.4.7 Item class for feature associations. 27
4.4.8 Item class for inheritance relations . 27
4.4.9 Item class for definition sources. 27
4.4.10 Item class for listed values. 28
5 XML implementation example (informative) . 28
5.1 Introduction. 28
5.2 UML application schema. 28
5.3 XML instance document . 29
iv © ISO 2009 – All rights reserved
---------------------- Page: 10 ----------------------
oSIST EN ISO 19110:2006/prA1:2009
ISO 19110:2005/FDAM 1:2009(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
Amendment 1 to ISO 19110:2005 was prepared by Technical Committee ISO/TC 211, Geographic
information/Geomatics.
© ISO 2009 – All rights reserved v
---------------------- Page: 11 ----------------------
oSIST EN ISO 19110:2006/prA1:2009
ISO 19110:2005/FDAM 1:2009(E)
Introduction
This project amends ISO 19110:2005 based on experience implementing the standard, experience and
lessons learned by the ISO 19126 project team, harmonization with other ISO/TC 211 standards and in
particular to establish an XML schema encoding for feature catalogues. This addition will provide Extensible
Mark-up Language (XML) schemas that are meant to enhance interoperability by providing a common
specification for describing, validating and exchanging feature catalogue information.
vi © ISO 2009 – All rights reserved
---------------------- Page: 12 ----------------------
oSIST EN ISO 19110:2006/prA1:2009
FINAL DRAFT AMENDMENT ISO 19110:2005/FDAM 1:2009(E)
Geographic information — Methodology for feature
cataloguing — Amendment 1
1 Scope
This document describes additions and minor changes to ISO 19110:2005. These changes aim at:
ƒ Facilitating the use of the ISO 19110 standard to create geographic feature catalogues.
ƒ Ensuring a consistent description of the feature types of an application schema;
ƒ Enhancing the compliance of ISO 19110 with ISO 19109;
ƒ Enabling an XML Schema implementation of ISO 19110 compliant Feature Catalogues. This XML
Schema Implementation is based on ISO/TS 19139 encoding rules.
ƒ Enabling the registration of feature catalogues and their feature types.
2 List of changes
2.1 Revised Scope
Clause 1 of ISO 19110:2005 is revised as follows:
This International Standard defines the methodology for cataloguing feature types. This International Standard
specifies how feature types can be organized into a feature catalogue and presented to the users of a set of
geographic data. This International Standard is applicable to creating catalogues of feature types in previously
uncatalogued domains and to revising existing feature catalogues to comply with standard practice. This
International Standard applies to the cataloguing of feature types that are represented in digital form. Its
principles can be extended to the cataloguing of other forms of geographic data. Feature catalogues are
independent of feature concept dictionaries defined in ISO 19126 and can be specified without having to use
or create a Feature Concept Dictionary.
This International Standard is applicable to the definition of geographic features at the type level. This
International Standard is not applicable to the representation of individual instances of each type. This
International Standard excludes portrayal schemas as specified in ISO 19117.
This International Standard may be used as a basis for defining the universe of discourse being modelled in a
particular application, or to standardize general aspects of real world features being modelled in more than
one application.
© ISO 2009 – All rights reserved 1
---------------------- Page: 13 ----------------------
oSIST EN ISO 19110:2006/prA1:2009
ISO 19110:2005/FDAM 1:2009(E)
2.2 Revised conformance clause
Clause 2 of ISO 19110:2005 is revised as follows:
Because this International Standard specifies a number of options that are not required for all feature
catalogues, this clause specifies 6 conformance classes. These classes are differentiated on the basis of two
criteria:
a) What elements of a feature type are required in a catalogue?
1) feature attributes only?
2) feature attributes and feature associations?
3) feature attributes, feature associations, and feature operations?
b) Is there a requirement for defining global feature attributes, feature associations, and feature operations
which may be bound to multiple feature types?
c) Is there a requirement to include inheritance relationships in the feature catalogue?
Annex A specifies a test module for each of the conformance classes, as shown in Table 1.
Table 1 — Conformance classes
Attributes, Inheritance
Attributes Attributes and Global
associations and relationships Test Module
only associations Properties
operations included
X — — — — A.17
— X — — — A.18
— — X — — A.19
— — — X — A.22
X — — — X A.23
— X — — X A.24
— — X — X A.25
NOTE The initial test module numbers are kept even if some of the test modules are removed. The numbering would
have to change if a new edition of the standard was released.
2.3 Revised Normative references
The following normative references are added to Clause 3:
ISO/TS 19135:2005, Geographic Information – Procedures for item registration
ISO/TS 19139:2007, Geographic Information – Metadata – XML Schema Implementation
2.4 Revised Terms and Definitions
Clause 4.4 is revised as follows:
2 © ISO 2009 – All rights reserved
---------------------- Page: 14 ----------------------
oSIST EN ISO 19110:2006/prA1:2009
ISO 19110:2005/FDAM 1:2009(E)
4.4
feature catalogue
catalogue containing definitions and descriptions of the feature (4.1) types, feature attributes (4.3), and
feature relationships occurring in one or more sets of geographic data, together with any feature operations
(4.5) that may be applied
The following terms are added:
feature inheritance
mechanism by which more specific features incorporate structure and behaviour of more general features
related by behaviour
feature relationship
feature association (4.2) or feature inheritance
2.5 Revised Abbreviations
The following abbreviation is added to Clause 5:
gfc Geographic Feature Cataloguing
2.6 Revised 6.1
st nd
1 and 2 sentences of 6.1 are revised as follows:
A feature catalogue shall present the abstraction of reality represented in one or more sets of geographic
data. The basic level of abstraction in a feature catalogue shall be the feature type.
2.7 Revised 6.2.2
st
1 sentence of 6.2.2 is revised as follows:
A template for the representation of feature catalogues is specified in Annex B.
2.8 Revised form of names
Clause 6.2.3.1 is revised as follows:
All feature types and feature properties (i.e. feature attributes, feature associations, association roles, and
feature operations) included in a feature catalogue shall be identified by a name. The name of a feature type
is unique within that feature catalogue. The name of a feature property (whether the feature property is a
global property bound to the feature type or is local to the feature type) is unique within its feature type. The
name of a global feature property is unique within that feature catalogue.
2.9 Revised test modules
2.9.1 Revision of test module A.3
Item 2 of test module A.3 is modified as follows:
2) All feature types, all feature association and all global feature properties (feature role, feature
attribute or feature operation not directly owned by a feature type) are identified by a name that is
unique within the feature catalogue.
A new item is added:
© ISO 2009 – All rights reserved 3
---------------------- Page: 15 ----------------------
oSIST EN ISO 19110:2006/prA1:2009
ISO 19110:2005/FDAM 1:2009(E)
7) All carriers of characteristics of a feature type are identified by a name that is unique in the context of
that feature type.
2.9.2 Revision of test module A.7
The test method of test module A.7 is changed as follows:
b) test method: test each attribute and role listed in Table B.5 (and Table B.4) by verifying that for each the
specified description, obligation/condition, maximum occurrence, type, and constraint are satisfied.
2.9.3 Revision of test module A.10
The test method of test module A.10 is changed as follows:
b) test method: test each attribute and role listed in Table B.8 and Table B.4 by verifying that for each the
specified description, obligation/condition, maximum occurrence, type, and constraint are satisfied
2.9.4 Revision test module A.11
The item 2 of the test method in the test module A.11 is removed.
2.9.5 Revision of test module A.19
The test method of test module A.19 is changed as follows:
b) test method: perform test module A.18 and test case A.7 (feature operation)
2.9.6 Revision of test module A.22
The test module A.20 is changed as follows:
a) test purpose: verify that feature catalogue supports core representation functionality, comprised of feature
types, and feature properties (i.e. feature attributes, association roles and feature operations) either
directly owned by a single feature type or globally defined in the feature catalogue
b) test method: perform test module A.8, A.16 and A.18
c) reference: A.8, A.16 and A.18
d) test type: capability
2.10 Revision of the Feature Catalogue Template (Annex B of ISO 19110:2005)
2.10.1 Revision of the conceptual schema
2.10.1.1 Revision of Figure B.1 of ISO 19110:2005
The conceptual model of a feature catalogue documented in Figure B.1 of ISO 19110:2005 is replaced by
Figure B.1a, B.1b and B.1c.
4 © ISO 2009 – All rights reserved
---------------------- Page: 16 ----------------------
oSIST EN ISO 19110:2006/prA1:2009
ISO 19110:2005/FDAM 1:2009(E)
<>
CT_Catalogue
(from Catalogues)
+ name : CharacterString
+ scope[1.*] : CharacterString
+ fieldOfApplication[0.*] : CharacterString
<>
+ versionNumber : CharacterString +inheritanceRelation
FC_InheritanceRelation
+ versionDate : Date
0.*
+ language[0.1] : CharacterString + name[0.1]: CharacterString
+ characterSet[0.1] : MD_CharacterSetCode = "utf8" + description : CharacterString
+inheritsFrom
+ locale[0.*] PT_Locale
+ uniqueInstance : Boolean
0.*
+inheritsTo 0.*
Specialization
<>
FC_FeatureCatalogue
Generalization
1 +subtype
+ producer : CI_ResponsibleParty
<>
+ functionalLanguage[0.1] : CharacterString
1
FC_FeatureType
1
+featureCatalogue +supertype
+featureType + typeName : LocalName
+ definition[0.1] : CharacterString
1.*
ConsistsOf
<>
+ code[0.1] : CharacterString
+rolePlayer
FC_CarrierOfCharacteristics
+carrierOfCharacteristics 0.1 + isAbstract : Boolean = FALSE
0.1
+ aliases[0.*] : LocalName
0.* Member Of +featureType
<>
<>
FC_PropertyType FC_FeatureAssociation
+ memberName : LocalName
+ definition[0.1] : CharacterString
+relation
+ cardinality : Multiplicity = 1
Role
<>
2.*
FC_AssociationRole
+roleName
+ cardinality : Multiplicity = 0.*
+ type : FC_RoleType = "ordinary"
+ isOrdered : Boolean = FALSE
+ isNavigable : Boolean = TRUE
<>
<>
if count(featureType)=1 then
FC_FeatureAttribute
FC_RoleType
rolePlayer is mandatory
+ code[0.1] : CharacterString + ordinary
+ valueMeasurementUnit[0.1] : UnitOfMeasure + aggregation
+ composition
+ valueType[0.1] : TypeName
0.*
<>
<>
FC_ListedValue
+listedValue
FC_FeatureOperation
+ label : CharacterString
if count(feat
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.