Fibre optic active components and devices - Performance standards - Part 11: Multiple channel transmitter/receiver chip scale package with multimode fibre interface (IEC 62149-11:2020)

This part of IEC 62149 specifies the performance standards for a multiple channel
transmitter/receiver chip scale package (CSP) with multimode fibre interface that operates at
up to 28 Gbit/s per channel. It specifies the parameters that apply, with clearly defined
conditions, severities, and pass/fail criteria. The tests are intended to be run as an initial design
verification to prove any product's ability to satisfy the performance standard's requirements.
A product that has been shown to meet all the requirements of a performance standard can be
declared as complying with the performance standard, but is then controlled by a quality
assurance/quality conformance program.

Aktive Lichtwellenleiterbauelemente und -geräte - Betriebsverhaltensnormen - Teil 11: Mehrkanal-Sender-Empfänger-Chip-Scale-Bauelemente mit Mehrmodenfaser-Schnittstelle (IEC 62149-11:2020)

Composants et dispositifs actifs fibroniques - Normes de performances - Partie 11: Boîtier-puce émetteur/récepteur à plusieurs canaux avec interface à fibre multimodale (IEC 62149-11:2020)

IEC 62149-11: 2020 spécifie les normes de performances d’un boîtier-puce (CSP) émetteur/récepteur à plusieurs canaux avec interface à fibre multimodale qui fonctionne à une vitesse allant jusqu’à 28 Gbit/s par canal. Il spécifie les paramètres qui s’appliquent, avec des conditions clairement définies, des sévérités et des critères d’acceptation/de refus. Les essais sont destinés à être effectués à titre de vérification initiale de conception, pour prouver la capacité du produit à satisfaire aux exigences des normes de performances. Un produit dont il a été démontré qu’il satisfait à toutes les exigences d’une norme de performance peut être déclaré comme étant conforme à celle-ci, mais il convient ensuite de le contrôler selon un programme d’assurance de la qualité/de conformité de la qualité.

Aktivne optične komponente in naprave - Tehnični standardi - 11. del: Večkanalni oddajnik/sprejemnik v okrovu velikosti integriranega vezja z mnogorodovnim optičnim vmesnikom (IEC 62149-11:2020)

General Information

Status
Published
Publication Date
09-Jul-2020
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Jul-2020
Due Date
05-Sep-2020
Completion Date
10-Jul-2020

Buy Standard

Standard
EN IEC 62149-11:2020
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 62149-11:2020
01-september-2020
Aktivne optične komponente in naprave - Tehnični standardi - 11. del: Večkanalni
oddajnik/sprejemnik v okrovu velikosti integriranega vezja z mnogorodovnim
optičnim vmesnikom (IEC 62149-11:2020)
Fibre optic active components and devices - Performance standards - Part 11: Multiple
channel transmitter/receiver chip scale package with multimode fibre interface (IEC
62149-11:2020)
Aktive Lichtwellenleiterbauelemente und -geräte - Betriebsverhaltensnormen - Teil 11:
Mehrkanal-Sender-Empfänger-Chip-Scale-Bauelemente mit Mehrmodenfaser-
Schnittstelle (IEC 62149-11:2020)
Composants et dispositifs actifs fibroniques - Normes de performances - Partie 11:
Boîtier-puce émetteur/récepteur à plusieurs canaux avec interface à fibre multimodale
(IEC 62149-11:2020)
Ta slovenski standard je istoveten z: EN IEC 62149-11:2020
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
SIST EN IEC 62149-11:2020 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 62149-11:2020

---------------------- Page: 2 ----------------------
SIST EN IEC 62149-11:2020


EUROPEAN STANDARD EN IEC 62149-11

NORME EUROPÉENNE

EUROPÄISCHE NORM
June 2020
ICS 33.180.20

English Version
Fibre optic active components and devices - Performance
standards - Part 11: Multiple channel transmitter/receiver chip
scale package with multimode fibre interface
(IEC 62149-11:2020)
Composants et dispositifs actifs fibroniques - Normes de Aktive Lichtwellenleiterbauelemente und -geräte -
performances - Partie 11: Boîtier-puce émetteur/récepteur à Betriebsverhaltensnormen - Teil 11: Mehrkanal-Sender-
plusieurs canaux avec interface à fibre multimodale Empfänger-Chip-Scale-Bauelemente mit Mehrmodenfaser-
(IEC 62149-11:2020) Schnittstelle
(IEC 62149-11:2020)
This European Standard was approved by CENELEC on 2020-06-02. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 62149-11:2020 E

---------------------- Page: 3 ----------------------
SIST EN IEC 62149-11:2020
EN IEC 62149-11:2020 (E)
European foreword
The text of document 86C/1596/CDV, future edition 1 of IEC 62149-11, prepared by SC 86C "Fibre
optic systems and active devices" of IEC/TC 86 "Fibre optics" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN IEC 62149-11:2020.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-03-02
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-06-02
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 62149-11:2020 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60191 (series) NOTE Harmonized as EN 60191 (series)
IEC 60793-2-10 NOTE Harmonized as EN IEC 60793-2-10
IEC 60793-2 (series) NOTE Harmonized as EN 60793-2 (series)
IEC 60950 (series) NOTE Harmonized as EN 60950 (series)
IEC 61280 (series) NOTE Harmonized as EN 61280 (series)
IEC 61281-1 NOTE Harmonized as EN IEC 61281-1
IEC 62007-1 NOTE Harmonized as EN 62007-1
IEC 62007-2 NOTE Harmonized as EN 62007-2
IEC 62148-1 NOTE Harmonized as EN IEC 62148-1
IEC 62148-19 NOTE Harmonized as EN IEC 62148-19
ISO 1101 NOTE Harmonized as EN ISO 1101



2

---------------------- Page: 4 ----------------------
SIST EN IEC 62149-11:2020



IEC 62149-11

®


Edition 1.0 2020-04




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE











Fibre optic active components and devices – Performance standards –

Part 11: Multiple channel transmitter/receiver chip scale package with

multimode fibre interface




Composants et dispositifs actifs fibroniques – Normes de performances –

Partie 11: Boîtier-puce émetteur/récepteur à plusieurs canaux avec interface


à fibre multimodale













INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE


INTERNATIONALE




ICS 33.180.20 ISBN 978-2-8322-7793-5




Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 5 ----------------------
SIST EN IEC 62149-11:2020
– 2 – IEC 62149-11:2020 © IEC 2020
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions, abbreviated terms and symbols . 6
3.1 Terms and definitions . 6
3.2 Abbreviated terms . 6
3.3 Symbols . 7
4 Product parameters . 7
4.1 Diagram . 7
4.2 Absolute limiting ratings . 9
4.3 Operating conditions . 10
4.4 Functional specification. 10
4.4.1 Transmitter electrical characteristics . 10
4.4.2 Receiver electrical characteristics . 11
4.4.3 Transmitter optical characteristics . 11
4.4.4 Receiver optical characteristics . 11
(informative)  Optical coupling to chip scale package – Recommended optical
interface scheme . 13
Bibliography . 15

Figure 1 – Block diagram for chip scale package of 4ch transceiver . 8
Figure 2 – Block diagram for chip scale package of 12ch transmitter . 8
Figure 3 – Block diagram for chip scale package of 12ch receiver. 9
Figure A.1 – Recommended optical coupling scheme for output beam from chip scale
package to multimode fibre . 13
Figure A.2 – Recommended optical coupling scheme for output beam from chip scale
package to polymer waveguide . 14

Table 1 – Terminal function definitions . 9
Table 2 – Absolute limiting ratings . 10
Table 3 – Operating conditions . 10
Table 4 – Transmitter electrical characteristics . 11
Table 5 – Receiver electrical characteristics . 11
Table 6 – Transmitter optical characteristics . 11
Table 7 – Receiver optical characteristics . 12

---------------------- Page: 6 ----------------------
SIST EN IEC 62149-11:2020
IEC 62149-11:2020 © IEC 2020 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES –
PERFORMANCE STANDARDS –

Part 11: Multiple channel transmitter/receiver chip scale package with
multimode fibre interface

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users shoul
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.