Fibre optic active components and devices - Performance standards - Part 11: Multiple channel transmitter/receiver chip scale package with multimode fibre interface

IEC 62149-11: 2020 specifies the performance standards for a multiple channel transmitter/receiver chip scale package (CSP) with multimode fibre interface that operates at up to 28 Gbit/s per channel. It specifies the parameters that apply, with clearly defined conditions, severities, and pass/fail criteria. The tests are intended to be run as an initial design verification to prove any product's ability to satisfy the performance standard's requirements. A product that has been shown to meet all the requirements of a performance standard can be declared as complying with the performance standard, but is then controlled by a quality assurance/quality conformance program.

Aktive Lichtwellenleiterbauelemente und -geräte – Betriebsverhaltensnormen – Teil 11: Mehrkanal-Sender-Empfänger-Chip-Scale-Bauelemente mit Mehrmodenfaser-Schnittstelle

Composants et dispositifs actifs fibroniques - Normes de performances - Partie 11: Boîtier-puce émetteur/récepteur à plusieurs canaux avec interface à fibre multimodale

IEC 62149-11: 2020 spécifie les normes de performances d’un boîtier-puce (CSP) émetteur/récepteur à plusieurs canaux avec interface à fibre multimodale qui fonctionne à une vitesse allant jusqu’à 28 Gbit/s par canal. Il spécifie les paramètres qui s’appliquent, avec des conditions clairement définies, des sévérités et des critères d’acceptation/de refus. Les essais sont destinés à être effectués à titre de vérification initiale de conception, pour prouver la capacité du produit à satisfaire aux exigences des normes de performances. Un produit dont il a été démontré qu’il satisfait à toutes les exigences d’une norme de performance peut être déclaré comme étant conforme à celle-ci, mais il convient ensuite de le contrôler selon un programme d’assurance de la qualité/de conformité de la qualité.

Aktivne optične komponente in naprave - Tehnični standardi - 11. del: Večkanalni oddajnik/sprejemnik v okrovu velikosti integriranega vezja z mnogorodovnim optičnim vmesnikom (IEC 62149-11:2020)

General Information

Status
Published
Publication Date
18-Jun-2020
Current Stage
6060 - Document made available - Publishing
Start Date
19-Jun-2020
Completion Date
19-Jun-2020

Buy Standard

Standard
EN IEC 62149-11:2020
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 62149-11:2020
01-september-2020
Aktivne optične komponente in naprave - Tehnični standardi - 11. del: Večkanalni
oddajnik/sprejemnik v okrovu velikosti integriranega vezja z mnogorodovnim
optičnim vmesnikom (IEC 62149-11:2020)
Fibre optic active components and devices - Performance standards - Part 11: Multiple
channel transmitter/receiver chip scale package with multimode fibre interface (IEC
62149-11:2020)
Aktive Lichtwellenleiterbauelemente und -geräte - Betriebsverhaltensnormen - Teil 11:
Mehrkanal-Sender-Empfänger-Chip-Scale-Bauelemente mit Mehrmodenfaser-
Schnittstelle (IEC 62149-11:2020)
Composants et dispositifs actifs fibroniques - Normes de performances - Partie 11:
Boîtier-puce émetteur/récepteur à plusieurs canaux avec interface à fibre multimodale
(IEC 62149-11:2020)
Ta slovenski standard je istoveten z: EN IEC 62149-11:2020
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
SIST EN IEC 62149-11:2020 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 62149-11:2020

---------------------- Page: 2 ----------------------
SIST EN IEC 62149-11:2020


EUROPEAN STANDARD EN IEC 62149-11

NORME EUROPÉENNE

EUROPÄISCHE NORM
June 2020
ICS 33.180.20

English Version
Fibre optic active components and devices - Performance
standards - Part 11: Multiple channel transmitter/receiver chip
scale package with multimode fibre interface
(IEC 62149-11:2020)
Composants et dispositifs actifs fibroniques - Normes de Aktive Lichtwellenleiterbauelemente und -geräte -
performances - Partie 11: Boîtier-puce émetteur/récepteur à Betriebsverhaltensnormen - Teil 11: Mehrkanal-Sender-
plusieurs canaux avec interface à fibre multimodale Empfänger-Chip-Scale-Bauelemente mit Mehrmodenfaser-
(IEC 62149-11:2020) Schnittstelle
(IEC 62149-11:2020)
This European Standard was approved by CENELEC on 2020-06-02. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 62149-11:2020 E

---------------------- Page: 3 ----------------------
SIST EN IEC 62149-11:2020
EN IEC 62149-11:2020 (E)
European foreword
The text of document 86C/1596/CDV, future edition 1 of IEC 62149-11, prepared by SC 86C "Fibre
optic systems and active devices" of IEC/TC 86 "Fibre optics" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN IEC 62149-11:2020.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-03-02
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-06-02
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 62149-11:2020 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60191 (series) NOTE Harmonized as EN 60191 (series)
IEC 60793-2-10 NOTE Harmonized as EN IEC 60793-2-10
IEC 60793-2 (series) NOTE Harmonized as EN 60793-2 (series)
IEC 60950 (series) NOTE Harmonized as EN 60950 (series)
IEC 61280 (series) NOTE Harmonized as EN 61280 (series)
IE
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.