SIST EN 26554:2000

Flanged automatic steam traps - Face-to-face dimensions (ISO 6554:1980)

Specifies dimensions for a range of steam traps used in flanged pipe systems, and gives definitions. The six basic series of dimensions for flanged steam traps, expressed in millimetres, are given in a table for the nominal sizes ranging from DN 15 to DN 50 inclusive, and for pressures to PN 40 inclusive.

Kondensatableiter mit Flanschanschluß - Baulängen (ISO 6554:1980)

Purgeurs automatiques de vapeur d'eau, a brides - Dimensions face a face (ISO 6554:1980)

La présente Norme internationale fixe les dimensions face-à-face d'une gamme de purgeurs automatiques de vapeur d'eau utilisés dans les tuyauteries à brides.

Prirobnični avtomatični izločevalniki kondenzata - Vgradne dolžine (ISO 6554:1980)

General Information

• Status: Withdrawn
• Publication Date: 31-Aug-2000
• Withdrawal Date: 03-Apr-2017
• ICS: 23.060.01 - Valves in general
• Technical Committee: IHPV - Hydraulics and pneumatics
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 04-Apr-2017
• Due Date: 27-Apr-2017
• Completion Date: 04-Apr-2017
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Ref Project: EN 26554:1991 - Flanged automatic steam traps - Face-to-face dimensions (ISO 6554:1980)

Relations

• Replaced By: SIST EN 558:2017 - Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - PN and Class designated valves
• Effective Date: 01-May-2017
• Replaced By: SIST EN 558:2017 - Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - PN and Class designated valves
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kondensatableiter mit Flanschanschluß - Baulängen (ISO 6554:1980)Purgeurs automatiques de vapeur d'eau, a brides - Dimensions face a face (ISO 6554:1980)Flanged automatic steam traps - Face-to-face dimensions (ISO 6554:1980)23.060.01Ventili na splošnoValves in generalICS:Ta slovenski standard je istoveten z:EN 26554:1991SIST EN 26554:2000en01-september-2000SIST EN 26554:2000SLOVENSKI
STANDARD



SIST EN 26554:2000



SIST EN 26554:2000



SIST EN 26554:2000



International Standard 6554 INTERNATIONAL ORGANIZATION FOR STANDARDIZATIONWvlEXAYHAPOAHAR OPl-AHM3Al.&lR fl0 CTAH~APTH3AWWWORGANISATION INTERNATIONALE DE NORMALISATION Flanged autbmatic steam traps - Face-to-face dimensions furgeurs automatigues de vapeur d’eau, h brides - Dimensions face-h-face First edition - 1980-06-15 UDC 621.186.6 Descriptors : safety valves, flanged valves, steam, traps, dimensions. Ref. No. ISO 6554-1980 EI Price based on 1 page SIST EN 26554:2000



Foreword ISO (the International Organization for Standardization) is a worldwide federation of national Standards institutes (ISO member bedies). The work of developing Inter- national Standards is carried out through ISO technical committees. Every member body interested in a subject for which a technical committee has been set up has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council. International Standard ISO 6554 was developed by Technical Committee ISO/TC 153, General purpose industrial valves, and was circulated to the member bodies in Wlarch 1979. lt has been approved by the member bedies of the following countries : Australia Germany, F. R. Belgium India Brazil Italy Ca
...