iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 805:2000

(Main)

Water supply - Requirements for systems and components outside buildings

Water supply - Requirements for systems and components outside buildings

This standard comprises: - general requirements for water supply systems outside buildings including potable water mains and service pipes, service reservoirs, other facilities and raw water mains but excluding treatment works and water resources development; - general requirements for components; - general requirements for inclusion in product standards which may include specifications which are more stringent; - requirements for installation, site testing and commissioning.

Wasserversorgung - Anforderungen an Wasserversorgungssysteme und deren Bauteile außerhalb von Gebäuden

Diese Norm legt fest: - allgemeine Anforderungen an Wasserversorgungssysteme außerhalb von Gebäuden; hierzu gehören alle Trinkwasserleitungen, Trinkwasserbehälter, sonstige Anlagen und Rohwasserleitungen, jedoch keine Wasseraufbereitungs- und Wassergewinnungsanlagen; - allgemeine Anforderungen an Rohrleitungsteile; - allgemeine Anforderungen zur Aufnahme in die Produktnormen, welche strengere Bestimmungen enthalten können; - Anforderungen für Bau, Prüfung und Inbetriebnahme.

Alimentation en eau - Exigences pour les réseaux extérieurs aux bâtiments et leurs composants

Cette norme prescrit: - des exigences générales pour les réseaux d'alimentation extérieurs aux bâtimens, y compris les conduites d'amenée et les conduites de branchement d'eau potable, les réservoirs de réseau, les autes installations et les conduites d'eau brute, mais non compris les usines de traitement des eaux et la production d'eau; - des exigences générales pour les composants; - des exigences générales destinées a etre incluses dans les normes de produits lesquelles peuvent inclure des exigences plus rigoureuses; - des exigences pour l'installation, les épreuves et la mise en service.

Oskrba z vodo - Zahteve za zunanje vodovode in dele

General Information

Status
Published
Publication Date
31-Oct-2000
ICS
93.025 - External water conveyance systems
Technical Committee
IOVO - Water supply and waste water engineering
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Nov-2000
Due Date
01-Nov-2000
Completion Date
01-Nov-2000
Directive
89/106/EEC - Construction products
93/38/EEC - Procurement procedures of entities operating in the water, energy, transport and telecommunications sectors
Mandate
M/BC/CEN/88/15 - Standardization request to CEN/CENELEC in the field of Water supply, drainage and sewerage
Ref Project
EN 805:2000 - Water supply - Requirements for systems and components outside buildings

Relations

Revises
oSIST prEN 805:2022 - Water supply - Requirements for systems and components outside buildings
Effective Date
18-Jan-2023
Revises
oSIST prEN 805:2022 - Water supply - Requirements for systems and components outside buildings
Effective Date
19-Jan-2023
Revised
oSIST prEN 805:2022 - Water supply - Requirements for systems and components outside buildings
Effective Date
06-Jun-2018

Buy Standard

EN 805:2000EN 805:2000
PreviousNext
Standard
EN 805:2000
English language
63 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
P prEN 805:1996P prEN 805:1996
PreviousNext
Draft
P prEN 805:1996
English language
75 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 805:2000
01-november-2000
Oskrba z vodo - Zahteve za zunanje vodovode in dele
Water supply - Requirements for systems and components outside buildings
Wasserversorgung - Anforderungen an Wasserversorgungssysteme und deren Bauteile
außerhalb von Gebäuden
Alimentation en eau - Exigences pour les réseaux extérieurs aux bâtiments et leurs
composants
Ta slovenski standard je istoveten z: EN 805:2000
ICS:
93.025 Zunanji sistemi za prevajanje External water conveyance
vode systems
SIST EN 805:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 805:2000

---------------------- Page: 2 ----------------------

SIST EN 805:2000

---------------------- Page: 3 ----------------------

SIST EN 805:2000

---------------------- Page: 4 ----------------------

SIST EN 805:2000

---------------------- Page: 5 ----------------------

SIST EN 805:2000

---------------------- Page: 6 ----------------------

SIST EN 805:2000

---------------------- Page: 7 ----------------------

SIST EN 805:2000

---------------------- Page: 8 ----------------------

SIST EN 805:2000

---------------------- Page: 9 ----------------------

SIST EN 805:2000

---------------------- Page: 10 ----------------------

SIST EN 805:2000

---------------------- Page: 11 ----------------------

SIST EN 805:2000

---------------------- Page: 12 ----------------------

SIST EN 805:2000

---------------------- Page: 13 ----------------------

SIST EN 805:2000

---------------------- Page: 14 ----------------------

SIST EN 805:2000

---------------------- Page: 15 ----------------------

SIST EN 805:2000

---------------------- Page: 16 ----------------------

SIST EN 805:2000

---------------------- Page: 17 ----------------------

SIST EN 805:2000

---------------------- Page: 18 ----------------------

SIST EN 805:2000

---------------------- Page: 19 ----------------------

SIST EN 805:2000

---------------------- Page: 20 ----------------------

SIST EN 805:2000

---------------------- Page: 21 ----------------------

SIST EN 805:2000

---------------------- Page: 22 ----------------------

SIST EN 805:2000

---------------------- Page: 23 ----------------------

SIST EN 805:2000

---------------------- Page: 24 ----------------------

SIST EN 805:2000

---------------------- Page: 25 ----------------------

SIST EN 805:2000

---------------------- Page: 26 ----------------------

SIST EN 805:2000

---------------------- Page: 27 ----------------------

SIST EN 805:2000

---------------------- Page: 28 ----------------------

SIST EN 805:2000

---------------------- P
...

SLOVENSKI STANDARD
3SIST SUEN 805:
01-GHFHPEHU
Oskrba z vodo - Zahteve za zunanje vodovode in dele
Water supply - Requirements for systems and components outside buildings
Wasserversorgung - Anforderungen an Wasserversorgungssysteme und deren Bauteile
außerhalb von Gebäuden
Alimentation en eau - Exigences pour les réseaux extérieurs aux bâtiments et leurs
composants
Ta slo
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 16941-2:2021(Main)
On-site non-potable water systems - Part 2: Systems for the use of treated greywater
EN 16941-2:2021

This European Standard specifies the principles of design, sizing, installation, identification, commissioning and maintenance of greywater systems with the purpose of use of greywater on-site.
It applies preferably for the use of treated greywater for:
-   WC flushing;
-   garden watering;
-   laundry;
-   cleaning purposes.
This European Standard also specifies the minimum requirements for greywater systems.
Excluded from the scope of this European Standard are:
-   the use as drinking water and for food preparation;
-   the use for personal hygiene purposes;
-   direct reuse systems for external use e. g. garden watering;
-   product design for specific system components;
-   industrial effluents;
-   heat recovery and cooling demands.
NOTE   Conformity with this European Standard does not exempt from compliance with the obligations arising from local or national regulations.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    33 pages
    French language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1295-1:2019(Main)
Structural design of buried pipelines under various conditions of loading - Part 1: General requirements
EN 1295-1:2019

This document specifies the requirements for the structural design of water supply pipelines, drains
and sewers, and other water industry pipelines, whether operating at atmospheric, greater or lesser
pressure.
In addition, this document gives guidance on the application of the nationally established methods of
design declared by and used in CEN member countries at the time of preparation of this document.
This guidance is an important source of design expertise, but it cannot include all possible special cases,
in which extensions or restrictions to the basic design methods may apply.
Since in practice precise details of types of soil and installation conditions are not always available at
the design stage, the choice of design assumptions is left to the judgement of the engineer. In this
connection the guide can only provide general indications and advice.
This document specifies the requirements for structural design and indicates the references and the
basic principles of the nationally established methods of design (see Annexes A and B).

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16941-1:2018(Main)
On-site non-potable water systems - Part 1: Systems for the use of rainwater
EN 16941-1:2018

This European Standard specifies the design, sizing, installation, identification, commissioning and maintenance of rainwater harvesting systems for the use of rainwater on-site as a substitute for potable water. This standard also specifies the minimum requirements for these systems.
Excluded from the scope of this standard are:
-   the use as drinking water,
-   decentralized attenuation,
-   infiltration.
NOTE   Conformity with the standard does not exempt from compliance of the obligations arising from local or national regulations.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14801:2006(Main)
Conditions for pressure classification of products for water and wastewater pipelines
EN 14801:2006

This document applies to components (pipes, joints, fittings, ferrules and valves), which have pressure related classification in European Standards covering products which are intended to be used for buried water supply and waste water pressure pipelines outside buildings. It specifies combinations of loading conditions and installation conditions to be used in the design method by reference to the relevant product standard for the determination of the allowable pressures (PFA, PMA and PEA) as defined in EN 805.
This document does not apply as an installation guide.
NOTE 1   This document does not give the full range of installation and loading parameters for all components and does not specify calculation and/or test methods for determination of the allowable pressures.
NOTE 2   This document does not relieve designers of their obligation under EN 805:2000, 8.4; e.g. to consider all conditions not addressed in clause 5 (e. g. seismic loads).
NOTE 3   This document does not deal with marking of components.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 805:2022(Main)
Water supply - Requirements for systems and components outside buildings
prEN 805

This document specifies:
-   general requirements for water supply systems outside buildings including potable water mains and service pipes, service reservoirs, other facilities and raw water mains but excluding treatment works and water resources development;
-   general requirements for components;
-   general requirements for inclusion in product standards which may include specifications which are more stringent;
-   requirements for installation, site testing and commissioning.
The requirements of this document apply to:
-   the design and construction of new water supply systems;
-   the extension of significant areas forming a coherent part of an existing water supply system;
-   significant modification and/or rehabilitation of existing water supply systems;
-   all those water infrastructure systems since they are key to meet the sustainable goals of the cities and to show the urgent need to invest in them in order to consider fundamental aspects, such as resilience or mitigation/adaptation to climate change.
NOTE   It is not intended that existing water supply systems are to be altered to comply with this document, provided that there are no significant detrimental effects on water quantity, security, reliability and adequacy of the supply.

  • Draft
    74 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 16941-1:2022(Main)
On-site non-potable water systems - Part 1: Systems for the use of rainwater
prEN 16941-1

This European Standard specifies the requirements and gives recommendations for the design, sizing, installation, identification, commissioning and maintenance of rainwater harvesting systems for the use of rainwater on-site as non-potable water. This European Standard also specifies the minimum requirements for these systems.
Excluded from the scope of this European Standard are:
- the use as drinking water and for food preparation;
- the use for personal hygiene purposes;
- decentralized attenuation;
- infiltration.
NOTE   Conformity with the standard does not exempt from compliance with the obligations arising from local or national regulations.

  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 22391-3:2010/A2:2021(Amendment)
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings - Amendment 2 (ISO 22391-3:2009/Amd 2:2021)
EN ISO 22391-3:2009/A2:2021
  • Amendment
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 1046:2021(Main)
Thermoplastics piping and ducting systems - Outside the building structures for gravity and pressurised systems - Trench installation
CEN/TS 1046:2021

This document gives the recommended practise for underground open trench installation and commissioning of thermoplastics piping systems to be used for the conveyance of water under pressure (in addition to EN 805) and for the discharge of wastewater under gravity (in addition to EN 1610) .
In the field of non-pressure underground drainage and sewerage this is reflected in the marking of products by application code "U" and "UD":
-   outside the building structure (U);
-   both buried in ground within the building structure (application area code "D") and outside the
building (application area code "UD").
This document covers also installation and/or connections to valves, manholes, inspection chambers, gullies and other ancillary components in piping systems.
NOTE 1   Code of practise for pipelines for gas supply is covered by EN 12007-series [21].
NOTE 2   Recommended practices for installation of plastic piping systems for soil and waste discharge within the building structure is covered by CEN/TR 13801 [12].
NOTE 3   Practices for underground installation of rainwater infiltration and storage attenuation systems are covered by CEN/TR 17179 [13].
NOTE 4   It is assumed that additional recommendations and/or requirements are detailed in the individual product standards.
NOTE 5    If non-plastic components are part of the plastic system the manufacturer's instructions should be taken into account.
Requirements and instructions concerning commissioning of systems can be found in EN 805 and EN 1610 and the relevant national and/or local regulations. This document gives specific additional recommendations for commissioning relevant for plastic piping systems.
Attention is drawn to any relevant local and/or national regulations (e.g. health, safety and hygienic requirements).

  • Technical specification
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 11298-4:2021(Main)
Plastics piping systems for renovation of underground water supply networks - Part 4: Lining with cured-in-place pipes (ISO 11298-4:2021)
EN ISO 11298-4:2021

This International Standard, in conjunction with ISO 11298-1, specifies requirements and test methods for cured-in-place pipes and fittings used for the renovation of underground water supply networks. It applies to the use of various thermosetting resin systems, in combination with compatible fibrous carrier materials and other process-related plastics components.

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16941-2:2021(Main)
On-site non-potable water systems - Part 2: Systems for the use of treated greywater
EN 16941-2:2021

This European Standard specifies the principles of design, sizing, installation, identification, commissioning and maintenance of greywater systems with the purpose of use of greywater on-site.
It applies preferably for the use of treated greywater for:
-   WC flushing;
-   garden watering;
-   laundry;
-   cleaning purposes.
This European Standard also specifies the minimum requirements for greywater systems.
Excluded from the scope of this European Standard are:
-   the use as drinking water and for food preparation;
-   the use for personal hygiene purposes;
-   direct reuse systems for external use e. g. garden watering;
-   product design for specific system components;
-   industrial effluents;
-   heat recovery and cooling demands.
NOTE   Conformity with this European Standard does not exempt from compliance with the obligations arising from local or national regulations.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    33 pages
    French language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day