Fertilizers - Determination of the fineness of grinding (dry procedure)

This European Standard specifies the dry procedure for the determination of the fineness of grinding, which is applicable to all EC type fertilizers in which requirements are given of fineness of grinding using 0,630 mm and 0,160 mm.

Düngemittel - Bestimmung der Mahlfeinheit (trockenes Verfahren)

Diese Europäische Norm legt das trockene Verfahren für die Bestimmung der Mahlfeinheit fest, das auf alle EG-Düngemitteltypen anwendbar ist, an die hinsichtlich ihres Durchgangs durch ein 0,630-mm- und ein 0,160-mm-Sieb Anforderungen an deren Mahlfeinheit gestellt sind.

Engrais - Détermination de la finesse de mouture (procédé à sec)

Le présent document prescrit la méthode de détermination de la finesse de mouture à sec, applicable à tous les engrais de type CE pour lesquels les exigences portent sur une finesse de mouture aux tamis de maille 0,630 mm et 0,160 mm.

Gnojila - Določevanje finosti mletja (suhi postopek)

Ta evropski standard opredeljuje suhi postopek za določevanje finosti mletja, ki se uporablja za vsa gnojila tipa ES, za katera so podane zahteve glede finosti mletja z uporabo 0,630 mm in 0,160 mm.

General Information

Status
Published
Public Enquiry End Date
19-Aug-2009
Publication Date
18-Nov-2010
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
05-Nov-2010
Due Date
10-Jan-2011
Completion Date
19-Nov-2010

Buy Standard

Standard
EN 15928:2010
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Düngemittel - Bestimmung der Mahlfeinheit (trockenes Verfahren)Engrais - Détermination de la finesse de mouture (procédé à sec)Fertilizers - Determination of the fineness of grinding (dry procedure)65.080GnojilaFertilizersICS:Ta slovenski standard je istoveten z:EN 15928:2010SIST EN 15928:2010en,fr,de01-december-2010SIST EN 15928:2010SLOVENSKI
STANDARD



SIST EN 15928:2010



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15928
August 2010 ICS 65.080 English Version
Fertilizers - Determination of the fineness of grinding (dry procedure)
Engrais - Détermination de la finesse de mouture (procédé à sec)
Düngemittel - Bestimmung der Mahlfeinheit (trockenes Verfahren) This European Standard was approved by CEN on 16 July 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15928:2010: ESIST EN 15928:2010



EN 15928:2010 (E) 2 Contents Page Foreword .31Scope .42Normative references .43Terms and definitions .44Principle .45Apparatus .46Sampling and sample preparation .47Procedure .58Calculation and expression of the result .59Test report .5Bibliography .6 SIST EN 15928:2010



EN 15928:2010 (E) 3 Foreword This document (EN 15928:2010) has been prepared by Technical Committee CEN/TC 260 “Fertilizers and liming materials”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2011, and conflicting national standards shall be withdrawn at the latest by February 2011. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.