kSIST FprEN ISO 4080:2024

Rubber and plastics hoses and tubing, and their assemblies - Determination of permeability to gas (ISO/FDIS 4080:2024)

This document specifies three methods to determine the permeability to gas by measuring the volume of gas diffusing through a rubber or plastics hose or length of tubing used for gas applications in a specified time.
—     Method 1 is for determining the permeability of the complete hose wall or length of tubing wall, excluding end fittings, to the test gas.
—     Method 2 is for determining the permeability at the hose and fitting interface to the test gas.
—     Method 3 is for precisely determining the permeability of the complete hose or length of tubing, including end fittings.

Gummi- und Kunststoffschläuche mit und ohne Einlage und Schlauchleitungen - Bestimmung der Gasdurchlässigkeit (ISO/FDIS 4080:2024)

In diesem Dokument werden drei Verfahren zur Bestimmung der Gasdurchlässigkeit durch Messung des Gasvolumens festgelegt, das in einer festgelegten Zeit durch einen Gummi- oder Kunststoffschlauch oder eine Schlauchleitung für Gasanwendungen diffundiert.
-   Verfahren 1 dient der Bestimmung der Prüfgasdurchlässigkeit der gesamten Schlauchwand oder Schlauchwandlänge mit oder ohne Einlage, mit Ausnahme der Endarmaturen.
-   Verfahren 2 dient der Bestimmung der Prüfgasdurchlässigkeit im Übergangsbereich von Schlauch und Armatur.
-   Verfahren 3 dient der präzisen Bestimmung der Durchlässigkeit des gesamten Schlauchs oder der Schlauchlänge mit oder ohne Einlage, einschließlich der Endarmaturen.

Tuyaux et flexibles en caoutchouc et en plastique - Détermination de la perméabilité au gaz (ISO/FDIS 4080:2024)

Le présent document spécifie trois méthodes pour déterminer la perméabilité au gaz en mesurant le volume de gaz diffusant à travers un tuyau ou une longueur de tube en caoutchouc ou en plastique utilisé pour les applications gazières pendant une durée déterminée.
—     La méthode 1 est destinée à déterminer la perméabilité au gaz d'essai de la paroi du tuyau entier ou de la paroi d'une longueur de tube, à l'exclusion des embouts.
—     La méthode 2 est destinée à déterminer la perméabilité au gaz d'essai de l'interface du tuyau et du raccord.
—     La méthode 3 est destinée à déterminer précisément la perméabilité du tuyau entier ou d'une longueur de tube, comprenant des embouts.

Gumene in polimerne cevi in cevovodi ter njihovi priključki - Ugotavljanje prepustnosti za pline (ISO/FDIS 4080:2024)

General Information

• Status: Not Published
• Public Enquiry End Date: 23-Oct-2023
• ICS: 23.040.70 - Hoses and hose assemblies
• ICS: 83.140.40 - Hoses
• Technical Committee: IPMA - Polimer materials and products
• Current Stage: 5020 - Formal vote (FV) (Adopted Project)
• Start Date: 11-Apr-2024
• Due Date: 30-May-2024
• Completion Date: 15-Apr-2024
• Ref Project: FprEN ISO 4080 - Rubber and plastics hoses and tubing, and their assemblies - Determination of permeability to gas (ISO/FDIS 4080:2024)

Relations

• Replaces: SIST EN ISO 4080:2010 - Rubber and plastics hoses and hose assemblies - Determination of permeability to gas (ISO 4080:2009)
• Effective Date: 11-Nov-2020
• Revised: SIST EN ISO 4080:2010 - Rubber and plastics hoses and hose assemblies - Determination of permeability to gas (ISO 4080:2009)
• Effective Date: 19-Jan-2023
• Revises: SIST EN ISO 4080:2010 - Rubber and plastics hoses and hose assemblies - Determination of permeability to gas (ISO 4080:2009)
• Effective Date: 18-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 4080:2023
01-oktober-2023
Nadomešča:
SIST EN ISO 4080:2010
Gumene in polimerne cevi in cevovodi ter njihovi priključki - Ugotavljanje
prepustnosti za pline (ISO/DIS 4080:2023)
Rubber and plastics hoses and tubing, and their assemblies - Determination of
permeability to gas (ISO/DIS 4080:2023)
Gummi- und Kunststoffschläuche und Schlauchleitungen - Bestimmung der
Gasdurchlässigkeit (ISO/DIS 4080:2023)
Tuyaux et flexibles en caoutchouc et en plastique - Détermination de la perméabilité au
gaz (ISO/DIS 4080:2023)
Ta slovenski standard je istoveten z: prEN ISO 4080
ICS:
83.140.40 Gumene cevi Hoses
oSIST prEN ISO 4080:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 4080:2023

---------------------- Page: 2 ----------------------
oSIST prEN ISO 4080:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 4080
ISO/TC 45/SC 1 Secretariat: DIN
Voting begins on: Voting terminates on:
2023-08-02 2023-10-25
Rubber and plastics hoses and tubing, and their
assemblies — Determination of permeability to gas
ICS: 23.040.70
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 4080:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 3 ----------------------
oSIST prEN ISO 4080:2023
ISO/DIS 4080:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 4080
ISO/TC 45/SC 1 Secretariat: DIN
Voting begins on: Voting terminates on:

Rubber and plastics hoses and tubing, and their
assemblies — Determination of permeability to gas
ICS: 23.040.70
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: [phone]
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: [e-mail]
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 4080:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 4 ----------------------
oSIST prEN ISO 4080:2023
ISO/DIS 4080:2023(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Test pieces .
...