iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 23-1:1998

(Main)

Packages for washing and cleaning powders - Dimensions and volumes of cartons and drums from fibre board

Packages for washing and cleaning powders - Dimensions and volumes of cartons and drums from fibre board

This standard specifies the volumes and the characteristic dimensions of the packages. The dimensions of the packs are such that multiples of a unit volume of 750 ml are obtained. The respective volumes are expressed by symbols consisting of a letter and a whole number which, multiplied by 750 ml, corresponds to the nominal volume of the package.
The provision laid down in this standard shall apply to packages (cartons with or without a sleeve liner and drums), manufactured from cartonboard, solid fibreboard or corrugated fibreboard, designed alone or in combination for packaging washing and cleaning powders.

Verpackungen für pulverförmige Wasch- und Reinigungsmittel - Abmessungen und Volumen von Schachteln und Trommeln aus Pappe

Emballages pour produits de lavage et de nettoyage en poudre - Dimensions et volumes des boîtes et barils en carton

Embalaža za praškasta pralna in čistilna sredstva - Mere in prostornine kartonskih škatel in sodov

General Information

Status
Published
Publication Date
30-Sep-1998
ICS
55.160 - Cases. Boxes. Crates
Technical Committee
EPO - Packaging - sales and grouped
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Oct-1998
Due Date
01-Oct-1998
Completion Date
01-Oct-1998
Directive
80/232/EEC - Ranges of nominal quantities and nominal capacities permitted for certain pre-packaged products
87/356/EEC - Ranges of nominal quantities and nominal capacities permitted for certain pre-packged products (Dir. 80/232/EEC amendment)
Ref Project
EN 23-1:1978 - Packages for washing and cleaning powders - Dimensions and volumes of cartons and drums from fibre board

Buy Standard

EN 23-1:1998EN 23-1:1998
PreviousNext
Standard
EN 23-1:1998
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Verpackungen für pulverförmige Wasch- und Reinigungsmittel - Abmessungen und Volumen von Schachteln und Trommeln aus PappeEmballages pour produits de lavage et de nettoyage en poudre - Dimensions et volumes des boîtes et barils en cartonPackages for washing and cleaning powder
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 14053:2003(Main)
Packaging - Packagings manufactured from corrugated or solid fibreboard - Types and construction
EN 14053:2003

This European Standard describes basic types and constructions of corrugated or solid fibreboard packagings. Folding cartons are not covered by this European Standard.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14054:2003(Main)
Packaging - Paper and paperboard packaging - Design of cartons
EN 14054:2003

This European Standard describes basic types and constructions of cartons in carton board.  Styles of corrugated and solid board packaging are not covered by this EN standard.
NOTE   Cartons are usually delivered by the carton manufacturer, to the user, in flat folded form (preglued) or as a flat blank.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13199-2:2001(Main)
Packaging - Small Load Carrier Systems - Part 2: Column Stackable System (CSS)
EN 13199-2:2000

This standard specifies the main characteristics and the testing of reusable durable parallelepipedic SLCs and their accessories which form a column stackable system designed to contain bulk or precisely located component loads up to maximum load of 20 kg.
Illustrations of functional features are given in Annex D (informative).

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13199-1:2001(Main)
Packaging - Small Load Carrier Systems - Part 1: Common requirements and test methods
EN 13199-1:2000

This Part of EN 13199 specifies the essential characteristics and the common requirements and test methods for small load carrier systems used in the handling, transport and storage of non-food products. The application of such systems is described in Annex C. This Part of EN 13199 is to be read in conjunction with the particular Part which specifies the chosen system. This standard is based on performance requirements and thus does not include specific design features. However it includes essential requirements to allow for third-party assessment and certification of the products specified.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13117-1:2001(Main)
Transport packaging - Reusable, rigid plastics distribution boxes - Part 1: General purpose application
EN 13117-1:2000

This standard specifies the four main types of reusable rigid plastics distribution boxes for application in the fields of handling, transport, storage and display of food and non-food products in distribution systems from the point of manufacture to the point of retail services:  These are:  a) rigid parallelepipedic and rectangular boxes (stackable boxes) b) foldable boxes c) nestable boxes  d) nestable and stackable boxes. These boxes are based on the modular area 600 mm x 400 mm and subdivisions or multiples of it.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13117-2:2001(Main)
Transport packaging - Reusable, rigid plastics distribution boxes - Part 2: General specifications for testing
EN 13117-2:2000

This standard specifies minimum performance requirements and methods of test for reusable rigid plastics transport packaging as specified in prEN 13117-1:1999. Special applications such as heavy loads, low or high operating temperatures will require an agreement to be made between the supplier and the user to supply a box to satisfy his requirements. Example: - Heavy loads, - Metal components, - Low temperatures below - 20°C, - High temperatures above + 30°C

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13199-3:2001(Main)
Packaging - Small Load Carrier Systems - Part 3: Bond Stackable System (BSS)
EN 13199-3:2000

This Part of the EN 13199 specifies the main characteristics and the testing of durable, re-usable parallelepipedic boxes and their accessories which form a bond stackable system designed to contain bulk or precisely located component loads up to a maximum useful load of 50 kg.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 16819:2016(Main)
Postal services - Parcel boxes for end use - Technical features
CEN/TS 16819:2015

This Technical Specification describes the technical features of parcel boxes for end use. This covers technical features such as size of parcels, ergonomics and safety, corrosion and water penetration resistance and security of delivery.

  • Technical specification
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60286-4:2014(Main)
Packaging of components for automatic handling - Part 4: Stick magazines for electronic components encapsulated in packages of different forms
EN 60286-4:2013

This part of IEC 60286 is applicable to stick magazines (including end stoppers) intended to be used for storage of electronic components, for transport from the manufacturer to the customer and for in-house use in the manufacturing plant. They are also used to feed automatic placement machines for surface mounting as well as for through-hole mounting of electronic components.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14482:2012(Main)
Postal services - Trays for international letter mail - Test methods and performance requirements
EN 14482:2010

This Technical Specification specifies the performance requirements and testing methods for standard letter mail trays, as specified in classification 1.1. The trays should be used to facilitate the exchange of international mail. The technical specification of the trays shall be such that the performance requirements specified herein shall be met and tests specified herein successfully completed. The technical specifications of trays as such however, are beyond the scope of this Technical Specification

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day