SIST EN ISO 10545-4:1998

Ceramic tiles - Part 4: Determination of modulus of rupture and breaking strength (ISO 10545-4:1995)

Defines a test method for determining the modulus of rupture and breaking strength of all ceramic tiles.

Keramische Fliesen und Platten - Teil 4: Bestimmung der Biegefestigkeit und der Bruchlast (ISO 10545-4:1995)

Dieser Teil von ISO 10545 beschreibt ein Prüfverfahren zur Bestimmung der Biegefestigkeit und der Bruchlast für alle keramischen Fliesen und Platten.

Carreaux et dalles céramiques - Partie 4: Détermination de la résistance a la flexion et de la force de rupture (ISO 10545-4:1995)

La présente partie de l'ISO 10545 prescrit une méthode pour la détermination de la résistance à la flexion et de la force de rupture pour tous les carreaux céramiques.
NOTE 1 L'ISO 13006:--, Carreaux et dalles céramiques -- Définitions, classification, caractéristiques et marquage (à publier), prescrit les exigences requises pour les propriétés des carreaux et dalles céramiques et fournit d'autres informations utiles sur ces produits.

Keramične ploščice - 4. del: Ugotavljanje sile pri zlomu in upogibne trdnosti

General Information

• Status: Withdrawn
• Publication Date: 31-Mar-1998
• Withdrawal Date: 21-Mar-2012
• ICS: 91.100.23 - Ceramic tiles
• Technical Committee: IKER - Ceramics
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 21-Mar-2012
• Due Date: 13-Apr-2012
• Completion Date: 22-Mar-2012
• Directive: 89/106/EEC - Construction products
• Ref Project: EN ISO 10545-4:1997 - Ceramic tiles - Part 4: Determination of modulus of rupture and breaking strength (ISO 10545-4:1994)

Relations

• Replaced By: SIST EN ISO 10545-4:2012 - Ceramic tiles - Part 4: Determination of modulus of rupture and breaking strength (ISO 10545-4:2004)
• Effective Date: 01-May-2012
• Replaced By: SIST EN ISO 10545-4:2012 - Ceramic tiles - Part 4: Determination of modulus of rupture and breaking strength (ISO 10545-4:2004)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 10545-4:1998
01-april-1998
.HUDPLþQHSORãþLFHGHO8JRWDYOMDQMHVLOHSUL]ORPXLQXSRJLEQHWUGQRVWL
Ceramic tiles - Part 4: Determination of modulus of rupture and breaking strength (ISO
10545-4:1995)
Keramische Fliesen und Platten - Teil 4: Bestimmung der Biegefestigkeit und der
Bruchlast (ISO 10545-4:1995)
Carreaux et dalles céramiques - Partie 4: Détermination de la résistance a la flexion et
de la force de rupture (ISO 10545-4:1995)
Ta slovenski standard je istoveten z: EN ISO 10545-4:1997
ICS:
91.100.23 .HUDPLþQHSORãþLFH Ceramic tiles
SIST EN ISO 10545-4:1998 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 10545-4:1998

---------------------- Page: 2 ----------------------

SIST EN ISO 10545-4:1998

---------------------- Page: 3 ----------------------

SIST EN ISO 10545-4:1998

---------------------- Page: 4 ----------------------

SIST EN ISO 10545-4:1998

---------------------- Page: 5 ----------------------

SIST EN ISO 10545-4:1998

---------------------- Page: 6 ----------------------

SIST EN ISO 10545-4:1998
ISO
INTERNATIONAL
105454
STANDARD
First edition
1994-08-15
Ceramic tiles -
Part 4:
Determination of modulus of rupture and
breaking strength
Carreaux et dalles cbramiques -
Partie 4: Determination de Ia rhistance a Ia flexion et de Ia forte de
rup ture
Reference number
ISO 10545-4: 1994(E)

---------------------- Page: 7 ----------------------

SIST EN ISO 10545-4:1998
ISO 1054594:1994(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national Standards bodies (ISO member bodies). The work
of preparing International Standards is normally carried out through ISO
technical committees. Esch member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard ISO 10545-4 was prepared by Technical Committee
ISOfTC 189, Ceramic tile.
ISO 10545 consists of the following Parts, under the general title Ceramic
tiles:
- Part 7: Sampling and basis for acceptance
- Part 2: Determination of dimensions and surface quality
- Part 3: Determination o f water absorption, apparen t porosity, appar-
ent relative density and bulk density
- Part 4: Determination of modulus of rupture and breaking strength
- Part 5: Determination of impact resistance by measurement of co-
efficient of restitution
- Part 6: Determination of resistance to deep abrasion for unglazed
tiles
- Part 7: Determination of resistance to surface abrasion for glazed
tiles
- Part 8: Determination o f linear thermal expansion
0 ISO 1994
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronie or mechanical, including photocopying and
microfilm, without Permission in writing from the publisher.
International Organization for Standardization
Case Postale 56 l CH-l 211 Geneve 20 l Switzerland
Printed in Switzerland
ii

---------------------- Page: 8 ----------------------

SIST EN ISO 10545-4:1998
0 ISO
ISO 10545=4:1994(E)
- Part 9: Determination of resistance to thermal shock
- Part 10: Determination of moisture expansion
- Part 11: Determination o f crazing resistance for glazed tiles
- Part 12: Determination of frost resistance
- Part 13: Determination o f Chemical resistance
- Part 14: Determination o f resistance to stains
- Part 15: Extraction of lead and Cadmium from glazed tiles
- Part 16: Determination o f colour differentes
- Part 17: Determination of coefficient of friction
. . .
Ill

---------------------- Page: 9 ----------------------

SIST EN ISO 10545-4:1998
This page intentionally left blank

---------------------- Page: 10 ----------------------

SIST EN ISO 10545-4:1998
ISO 10545-4: 1994(E)
INTERNATIONAL STANDARD 0 ISO
Ceramic tiles -
Part 4:
Determination of modulus of rupture and breaking strength
3.2 breaking strength: Forte, expressed in
1 Scope
newtons, obtained by multiplying the breaking load
by the ratio (span between support rods)/(width of the
This part of ISO 10545 defines a test method for de-
test specimen).
termining the modulus of rupture and breaking
strength of all ceramic tiles.
3.3 modulus of rupture: Quantity, expressed in
ISO 13006:-, Ceramic tiles - Definitions, newtons per Square millimetre, obtained by dividing
NOTE 1
classification, characteristics and marking (to be published), the calculated breaking strength by the Square of the
provides property requirements for tiles and other useful
minimum thickness along the broken edge.
information on these products.
4 Principle
2 Normative reference
Determination of the breaking load, breaking strength
The following Standard contains provisions which, and modulus of rupture of a tile by applying a forte
at a definite rate to the centre of the tile, the Point of
through reference in this text, constitute provisions
application being in contact with the proper surface
of this part of ISO 10545. At the time of publication,
the edition indicated was valid. All Standards are sub- of the tile.
ject to revision, and Parties to agreements based on
this part of ISO 10545 are encouraged to investigate
5 Apparatus
the possibility of applying the most recent edition of
the Standard indicated below. Members of IEC and
5.1 Drying oven, capable of being operated at
ISO maintain registers of currently valid International
(110 & 5) “C.
Standards.
Microwave, infrared or other drying Systems may be
ISO 48:1994, Rubber, vulcanized or thermoplastic -
used provided that it has been determined that e
...