SIST EN ISO 10545-20:2022
(Main)Ceramic tiles - Part 20: Determination of deflection of ceramic tiles for calculating their radius of curvature (ISO 10545-20:2022)
Ceramic tiles - Part 20: Determination of deflection of ceramic tiles for calculating their radius of curvature (ISO 10545-20:2022)
This standard defines a test method for the determination of deflection of ceramic tiles for calculating their radius of curvature.
Keramische Fliesen und Platten - Prüfverfahren - Teil 20: Bestimmung der Durchbiegung von keramischen Fliesen und Platten zur Berechnung des Krümmungsradius (ISO 10545-20:2022)
Dieser Teil von ISO10545 legt ein Verfahren fest, um die Durchbiegung von keramischen Fliesen und Platten zur Berechnung ihres Krümmungsradius zu messen.
ANMERKUNG 1 zum Begriff: ISO13006 enthält Anforderungen an die Eigenschaften von Fliesen und Platten und weitere nützliche Angaben zu diesen Produkten.
Carreaux et dalles céramiques - Partie 20: Détermination de la flèche des carreaux et dalles céramiques pour calculer leur rayon de courbure (ISO 10545-20:2022)
Ce document spécifie une méthode permettant de mesurer la flèche des carreaux et dalles céramiques pour calculer leur rayon de courbure.
NOTE L’ISO 13006 spécifie les exigences relatives aux propriétés des carreaux et dalles, et fournit d’autres informations utiles sur ces produits.
Keramične ploščice - 20. del: Ugotavljanje deformacije keramičnih ploščic za izračun njihovega polmera ukrivljenosti (ISO 10545-20:2022)
Ta standard določa preskusno metodo za ugotavljanje deformacije keramičnih ploščic za izračun njihovega polmera ukrivljenosti.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 10545-20:2022
01-september-2022
Keramične ploščice - 20. del: Ugotavljanje deformacije keramičnih ploščic za
izračun njihovega polmera ukrivljenosti (ISO 10545-20:2022)
Ceramic tiles - Part 20: Determination of deflection of ceramic tiles for calculating their
radius of curvature (ISO 10545-20:2022)
Keramische Fliesen und Platten - Prüfverfahren - Teil 20: Bestimmung der Durchbiegung
von keramischen Fliesen und Platten zur Berechnung des Krümmungsradius (ISO
10545-20:2022)
Carreaux et dalles céramiques - Partie 20: Détermination de la flèche des carreaux et
dalles céramiques pour calculer leur rayon de courbure (ISO 10545-20:2022)
Ta slovenski standard je istoveten z: EN ISO 10545-20:2022
ICS:
91.100.23 Keramične ploščice Ceramic tiles
SIST EN ISO 10545-20:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 10545-20:2022
---------------------- Page: 2 ----------------------
SIST EN ISO 10545-20:2022
EN ISO 10545-20
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2022
EUROPÄISCHE NORM
ICS 91.100.23
English Version
Ceramic tiles - Part 20: Determination of deflection of
ceramic tiles for calculating their radius of curvature (ISO
10545-20:2022)
Carreaux et dalles céramiques - Partie 20: Keramische Fliesen und Platten - Prüfverfahren - Teil
Détermination de la flèche des carreaux et dalles 20: Bestimmung der Durchbiegung von keramischen
céramiques pour calculer leur rayon de courbure (ISO Fliesen und Platten zur Berechnung des
10545-20:2022) Krümmungsradius (ISO 10545-20:2022)
This European Standard was approved by CEN on 5 June 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10545-20:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 10545-20:2022
EN ISO 10545-20:2022 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 10545-20:2022
EN ISO 10545-20:2022 (E)
European foreword
This document (EN ISO 10545-20:2022) has been prepared by Technical Committee ISO/TC 189
"Ceramic tile" in collaboration with Technical Committee CEN/TC 67 “Ceramic tiles” the secretariat of
which is held by UNI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2023, and conflicting national standards shall
be withdrawn at the latest by January 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 10545-20:2022 has been approved by CEN as EN ISO 10545-20:2022 without any
modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 10545-20:2022
---------------------- Page: 6 ----------------------
SIST EN ISO 10545-20:2022
INTERNATIONAL ISO
STANDARD 10545-20
First edition
2022-06
Ceramic tiles —
Part 20:
Determination of deflection of ceramic
tiles for calculating their radius of
curvature
Carreaux et dalles céramiques —
Partie 20: Détermination de la flèche des carreaux et dalles
céramiques pour calculer leur rayon de courbure
Reference number
ISO 10545-20:2022(E)
© ISO 2022
---------------------- Page: 7 ----------------------
SIST EN ISO 10545-20:2022
ISO 10545-20:2022(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
© ISO 2022 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 10545-20:2022
ISO 10545-20:2022(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Apparatus . 2
6 Test specimens . 2
7 Procedure .3
8 Calculation . 3
9 Test report . 4
Bibliography . 6
iii
© ISO 2022 – All rights reserved
---------------------- Page: 9 ----------------------
SIST EN ISO 10545-20:2022
ISO 10545-20:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introdu
...
SLOVENSKI STANDARD
oSIST prEN ISO 10545-20:2021
01-september-2021
Keramične ploščice - Preskusne metode - 20. del: Ugotavljanje upogiba
keramičnih ploščic za izračun njihovega polmera ukrivljenosti (ISO/DIS 10545-
20:2021)
Ceramic tiles - Test methods - Part20: Determination of deflection of ceramic tiles for
calculating their radius of curvature (ISO/DIS 10545-20:2021)
Keramische Fliesen und Platten - Prüfverfahren - Teil 20: Bestimmung der Durchbiegung
von keramischen Fliesen und Platten zur Berechnung des Krümmungsradius (ISO/DIS
10545-20:2021)
Carreaux et dalles céramiques - Méthodes d'essai - Partie 20: Détermination de la flèche
des carreaux et dalles céramiques pour calculer leur rayon de courbure (ISO/DIS 10545-
20:2021)
Ta slovenski standard je istoveten z: prEN ISO 10545-20
ICS:
91.100.23 Keramične ploščice Ceramic tiles
oSIST prEN ISO 10545-20:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 10545-20:2021
---------------------- Page: 2 ----------------------
oSIST prEN ISO 10545-20:2021
DRAFT INTERNATIONAL STANDARD
ISO/DIS 10545-20
ISO/TC 189 Secretariat: ANSI
Voting begins on: Voting terminates on:
2021-07-13 2021-10-05
Ceramic tiles — Test methods —
Part 20:
Determination of deflection of ceramic tiles for calculating
their radius of curvature
ICS: 91.100.23
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 10545-20:2021(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2021
---------------------- Page: 3 ----------------------
oSIST prEN ISO 10545-20:2021
ISO/DIS 10545-20:2021(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 10545-20:2021
ISO/DIS 10545-20:2021(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus . 2
5.1 Drying Oven . 2
5.2 Recording pressure gauge . 2
5.3 Cylindrical support rods, . 2
5.4 Central cylindrical rod . 2
5.5 Deflection measurement device . 2
5.6 Stiff brush . 2
6 Test Specimens . 2
7 Procedure. 3
8 Calculation . 3
9 Test report . 3
© ISO 2021 – All rights reserved iii
---------------------- Page: 5 ----------------------
oSIST prEN ISO 10545-20:2021
ISO/DIS 10545-20:2021(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/
iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 189 (Ceramic Tiles)
A list of all parts in the ISO 10545 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/ members .html.
iv © ISO 2021 – All rights reserved
---------------------- Page: 6 ----------------------
oSIST prEN ISO 10545-20:2021
ISO/DIS 10545-20:2021(E)
Introduction
The International Organization for Standardization (ISO) draws attention to the fact that it is claimed
that compliance with this document may involve the use of a patent.
ISO t
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.