SIST EN ISO 10545-4:2012
(Main)Ceramic tiles - Part 4: Determination of modulus of rupture and breaking strength (ISO 10545-4:2004)
Ceramic tiles - Part 4: Determination of modulus of rupture and breaking strength (ISO 10545-4:2004)
ISO 10545-4:2004 specifies a test method for determining the modulus of rupture and breaking strength of all ceramic tiles.
Keramische Fliesen und Platten - Teil 4: Bestimmung der Biegefestigkeit und der Bruchlast (ISO 10545-4:2004)
Dieser Teil von ISO 10545 legt ein Prüfverfahren zur Bestimmung der Biegefestigkeit und der Bruchlast für alle keramischen Fliesen und Platten fest. ANMERKUNG ISO 13006 enthält Anforderungen an die Eigenschaften von Fliesen und Platten und weitere nützliche Angaben zu diesen Produkten.
Carreaux et dalles céramiques - Partie 4: Détermination de la résistance à la flexion et de la force de rupture (ISO 10545-4:2004)
L'ISO 10545-4:2004 spécifie une méthode pour la détermination de la résistance à la flexion et de la force de rupture pour tous les carreaux céramiques.
Keramične ploščice - 4. del: Ugotavljanje sile pri zlomu in upogibne trdnosti (ISO 10545-4:2004)
Ta del standarda ISO 10545 določa preskusno metodo za ugotavljanje sile pri zlomu in upogibne trdnosti vseh keramičnih ploščic.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 10545-4:2012
01-maj-2012
1DGRPHãþD
SIST EN ISO 10545-4:1998
.HUDPLþQHSORãþLFHGHO 8JRWDYOMDQMHVLOHSUL]ORPXLQXSRJLEQHWUGQRVWL ,62
Ceramic tiles - Part 4: Determination of modulus of rupture and breaking strength (ISO
10545-4:2004)
Keramische Fliesen und Platten - Teil 4: Bestimmung der Biegefestigkeit und der
Bruchlast (ISO 10545-4:2004)
Carreaux et dalles céramiques - Partie 4: Détermination de la résistance à la flexion et
de la force de rupture (ISO 10545-4:2004)
Ta slovenski standard je istoveten z: EN ISO 10545-4:2012
ICS:
91.100.23 .HUDPLþQHSORãþLFH Ceramic tiles
SIST EN ISO 10545-4:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 10545-4:2012
---------------------- Page: 2 ----------------------
SIST EN ISO 10545-4:2012
EUROPEAN STANDARD
EN ISO 10545-4
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2012
ICS 91.100.23 Supersedes EN ISO 10545-4:1997
English Version
Ceramic tiles - Part 4: Determination of modulus of rupture and
breaking strength (ISO 10545-4:2004)
Carreaux et dalles céramiques - Partie 4: Détermination de Keramische Fliesen und Platten - Teil 4: Bestimmung der
la résistance à la flexion et de la force de rupture (ISO Biegefestigkeit und der Bruchlast (ISO 10545-4:2004)
10545-4:2004)
This European Standard was approved by CEN on 8 January 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10545-4:2012: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 10545-4:2012
EN ISO 10545-4:2012 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 10545-4:2012
EN ISO 10545-4:2012 (E)
Foreword
The text of ISO 10545-4:2004 has been prepared by Technical Committee ISO/TC 189 “Ceramic tile” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 10545-4:2012 by
Technical Committee CEN/TC 67 “Ceramic tiles” the secretariat of which is held by UNI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by August 2012, and conflicting national standards shall be withdrawn at
the latest by August 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 10545-4:1997.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 10545-4:2004 has been approved by CEN as a EN ISO 10545-4:2012 without any
modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 10545-4:2012
---------------------- Page: 6 ----------------------
SIST EN ISO 10545-4:2012
INTERNATIONAL ISO
STANDARD 10545-4
Second edition
2004-11-01
Ceramic tiles —
Part 4:
Determination of modulus of rupture and
breaking strength
Carreaux et dalles céramiques —
Partie 4: Détermination de la résistance à la flexion et de la force de
rupture
Reference number
ISO 10545-4:2004(E)
©
ISO 2004
---------------------- Page: 7 ----------------------
SIST EN ISO 10545-4:2012
ISO 10545-4:2004(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall
not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the
unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2004
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
©
ii ISO 2004 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 10545-4:2012
ISO 10545-4:2004(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International
Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 10545-4 was prepared by Technical Committee ISO/TC 189, Ceramic tile.
This second edition cancels and replaces the first edition (ISO 10545-4:1994), which has been technically
revised.
ISO 10545 consists of the following parts, under the general title Ceramic tiles:
— Part 1: Sampling and basis for acceptance
— Part 2: Determination of dimensions and surface quality
— Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density
— Part 4: Determination of modulus of rupture and breaking strength
— Part 5: Determination of impact resistance by measurement of coefficient of restitution
— Part 6: Determination of resistance to deep abrasion for unglazed tiles
— Part 7: Determination of resistance to surface abrasion for glazed tiles
— Part 8: Determination of linear thermal expansion
— Part 9: Determination of resistance to thermal shock
— Part 10: Determination of moisture expansion
— Part 11: Determinati
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.