SIST EN 61747-2-1:2002
(Main)Liquid crystal and solid-state display devices -- Part 2-1: Passive matrix monochrome LCD modules - Blank detail specification
Liquid crystal and solid-state display devices -- Part 2-1: Passive matrix monochrome LCD modules - Blank detail specification
Superseded by EN 61747-2-1:2013
Flüssigkristall- und Halbleiter-Anzeige-Bauelemente -- Teil 2-1: Einfarbige passive Matrix-Flüssigkristall-Anzeigenmodule (LCD-Module) - Vordruck für Bauartspezifikation
Dispositifs d'affichage à cristaux liquides et à semiconducteurs -- Partie 2-1: Modules d'affichage à cristaux liquides (LCD) monochromes à matrice passive - Spécification particulière cadre
Liquid crystal and solid-state display devices - Part 2-1: Passive matrix monocrome LCD modules - Blank specification (IEC 61747-2-1:1998)
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Liquid crystal and solid-state display devices - Part 2-1: Passive matrix monocrome LCD modules - Blank specification (IEC 61747-2-1:1998)Flüssigkristall- und Halbleiter-Anzeige-Bauelemente -- Teil 2-1: Einfarbige passive Matrix-Flüssigkristall-Anzeigenmodule (LCD-Module) - Vordruck für BauartspezifikationDispositifs d'affichage à cristaux liquides et à semiconducteurs -- Partie 2-1: Modules d'affichage à cristaux liquides (LCD) monochromes à matrice passive - Spécification particulière cadreLiquid crystal and solid-state display devices -- Part 2-1: Passive matrix monochrome LCD modules - Blank detail specification31.120Elektronske prikazovalne napraveElectronic display devicesICS:Ta slovenski standard je istoveten z:EN 61747-2-1:2001SIST EN 61747-2-1:2002en01-september-2002SIST EN 61747-2-1:2002SLOVENSKI
STANDARD
SIST EN 61747-2-1:2002
EUROPEAN STANDARDEN 61747-2-1NORME EUROPÉENNEEUROPÄISCHE NORMJune 2001CENELECEuropean Committee for Electrotechnical StandardizationComité Européen de Normalisation ElectrotechniqueEuropäisches Komitee für Elektrotechnische NormungCentral Secretariat: rue de Stassart 35, B - 1050 Brussels© 2001 CENELEC -All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.Ref. No. EN 61747-2-1:2001 EICS 31.120English versionLiquid crystal and solid-state display devicesPart 2-1: Passive matrix monochrome LCD modules –Blank detail specification(IEC 61747-2-1:1998)Dispositifs d'affichage à cristaux liquideset à semiconducteursPartie 2-1: Modules d'affichage à cristauxliquides (LCD) monochromes à matricepassive –Spécification particulière cadre(CEI 61747-2-1:1998)Flüssigkristall- und Halbleiter-Anzeige-BauelementeTeil 2-1: Einfarbige passive Matrix-Flüssigkristall-Anzeigenmodule(LCD-Module) –Vordruck für Bauartspezifikation(IEC 61747-2-1:1998)This European Standard was approved by CENELEC on 2000-08-01. CENELEC members are bound tocomply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained onapplication to the Central Secretariat or to any CENELEC member.This European Standard exists in three official versions (English, French, German). A version in any otherlanguage made by translation under the responsibility of a CENELEC member into its own language andnotified to the Central Secretariat has the same status as the official versions.CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway,Portugal, Spain, Sweden, Switzerland and United Kingdom.SIST EN 61747-2-1:2002
EN 61747-2-1:2001- 2 -ForewordThe text of the International Standard IEC 61747-2-1:1998, prepared by SC 47C, Flat panel displaydevices, of IEC TC 47, Semiconductor devices, was submitted to the Unique Acceptance Procedureand was approved by CENELEC as EN 61647-2-1 on 2000-08-01 without any modification.The following dates were fixed:–latest date by which the EN has to be implementedat national level by publication of an identicalnational standard or by endorsement(dop)2001-12-01–latest date by which the national standards conflictingwith the EN have to be withdrawn(dow)2003-08-01__________Endorsement noticeThe text of the International Standard IEC 61747-2-1:1998 was approved by CENELEC as aEuropean Standard without any modification.__________SIST EN 61747-2-1:2002
NORMEINTERNATIONALECEIIECINTERNATIONALSTANDARD61747-2-1QC 720301Première éditionFirst edition1998-10Dispositifs d’affichage à cristaux liquideset à semiconducteurs –Partie 2-1:Modules d’affichage à cristaux liquides (LCD)monochromes à matrice passive –Spécification particulière cadreLiquid crystal and solid-state display devices –Part 2-1:Passive matrix monochrome LCD modules –Blank detail specification Commission Electrotechnique Internationale International Electrotechnical
CommissionPour prix, voir catalogue en vigueurFor price, see current
catalogue© IEC 1998
Droits de reproduction réservés
⎯ Copyright - all rights reservedAucune partie de cette publication ne peut être reproduite niutilisée sous quelque forme que ce soit et par aucunprocédé, électronique ou mécanique, y compris la photo-copie et les microfilms, sans l'accord écrit de l'éditeur.No part of this publication may be reproduced or utilized inany form or by any means, electronic or mechanical,including photocopying and microfilm, without
permission inwriting
from the publisher.International Electrotechnical Commission3, rue de Varembé
Geneva, SwitzerlandTelefax: +41 22 919 0300e-mail: inmail@iec.ch IEC web site
http: //www.iec.chCODE PRIXPRICE CODEKSIST EN 61747-2-1:2002
61747-2-1 © IEC:1998– 3 –INTERNATIONAL ELECTROTECHNICAL COMMISSION_________LIQUID CRYSTAL AND SOLID-STATE DISPLAY DEVICES –Part 2-1: Passive matrix monochrome LCD modules –Blank detail specificationFOREWORD1)The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprisingall national electrotechnical committees (IEC National Committees). The object of the IEC is to promoteinternational co-operation on all questions concerning standardization in the electrical and electronic fields. Tothis end and in addition to other activities, the IEC publishes International Standards. Their preparation isentrusted to technical committees; any IEC National Committee interested in the subject dealt with mayparticipate in this preparatory work. International, governmental and non-governmental organizations liaisingwith the IEC also participate in this preparation. The IEC collaborates closely with the International Organizationfor Standardization (ISO) in accordance with conditions determined by agreement between the twoorganizations.2)The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, aninternational consensus of opinion on the relevant subjects since each technical committee has representationfrom all interested National Committees.3)The documents produced have the form of recommendations for international use and are published in the formof standards, technical reports or guides and they are accepted by the National Committees in that sense.4)In order to promote international unification, IEC National Committees undertake to apply IEC InternationalStandards transparently to the maximum extent possible in their national and regional standards. Anydivergence between the IEC Standard and the corresponding national or regional standard shall be clearlyindicated in the latter.5)The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for anyequipment declared to be in conformity with one of its standards.6)Attention is drawn to the possibility that some of the elements of this International Standard may be the subjectof patent rights. The IEC shall not be held responsible for identifying any or all such patent rights.International Standard IEC 61747-2-1 has been prepared by subcommittee 47C:Optoelectronic, display and imaging devices, of IEC technical committee 47: Semiconductordevices.The text of this standard is based on the following documents:FDISReport on voting47C/214/FDIS47C/221/RVDFull information on the voting for the approval of this standard can be found in the report onvoting indicated in the above table.The QC number that appears on the front cover of this publication is the specification numberin the IECQ Quality Assessment System for Electronic Components (IECQ).SIST EN 61747-2-1:2002
61747-2-1 © IEC:1998– 5 –LIQUID CRYSTAL AND SOLID-STATE DISPLAY DEVICES –Part 2-1: Passive matrix monochrome LCD modules –Blank detail specificationINTRODUCTIONThe IEC quality assessment system for electronic components is operated in accordance withthe statutes of the IEC and under the authority of the IEC. The object of this system is to definequality assessment procedures in such a manner that electronic components released by oneparticipating country as conforming with the requirements of an applicable specification areequally acceptable in all other participating countries without the need for further testing.This blank detail specification is one of a series of blank detail specifications for liquid crystaldisplay devices and shall be used with the following IEC publications:IEC 61747-1:1998, Liquid crystal and solid-state display devices – Part 1: Generic specificationIEC 61747-2:1998, Liquid crystal and solid-state display devices – Part 2: Liquid crystal displaymodules – Sectional specificationRequired informationNumbers shown in brackets on this and the following pages correspond to the following itemsof required information, which shall be entered in the spaces provided.Identification of the detail specification[1]The name of the National Standards Organization under whose authority the detailspecification is issued.[2]The IECQ number of the detail specification.[3]The numbers and issue numbers of the generic and sectional specifications.[4]The national number of the detail specification, date of issue and any further information, ifrequired by the national system.Identification of the component[5]Type of component.[6]Information on typical construction and applications. If a device is designed to satisfyseveral applications, this shall be stated here. Characteristics, limits and inspectionrequirements for these applications shall be met. If a device is electrostatic sensitive, orcontains hazardous materials, a caution statement shall be added in the detailspecification.[7]Outline drawing and/or reference to t
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.