Dielectric and resistive properties of solid insulating materials - Part 1: General

This part of IEC 62631 gives general guidelines for the determination of dielectric and resistive properties of solid electrical insulating materials.

Dielektrische und resistive Eigenschaften fester Elektroisolierstoffe - Teil 1: Grundlagen

Propriétés diélectriques et résistives des matériaux isolants solides - Partie 1: Généralités

La CEI 62631-1:2011 donne des directives générales pour la détermination des propriétés diélectriques et résistives des matériaux isolants électriques solides.

Ugotavljanje dielektričnih in uporovnih lastnosti trdnih izolacijskih materialov - 1. del: Splošno

Ta del IEC 62631 podaja splošne smernice za ugotavljanje dielektričnih in uporovnih lastnosti trdnih izolacijskih materialov.

General Information

Status
Published
Publication Date
26-Jul-2011
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
13-Jul-2011
Due Date
17-Sep-2011
Completion Date
27-Jul-2011

Relations

Buy Standard

Standard
EN 62631-1:2011
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62631-1:2011
01-september-2011
8JRWDYOMDQMHGLHOHNWULþQLKLQXSRURYQLKODVWQRVWLWUGQLKL]RODFLMVNLKPDWHULDORY
GHO6SORãQR
Dielectric and resistive properties of solid insulating materials - Part 1: General
Dielektrische und resistive Eigenschaften fester Elektroisolierstoffe - Teil 1: Grundlagen
Propriétés diélectriques et résistives des matériaux isolants solides - Partie 1:
Généralités
Ta slovenski standard je istoveten z: EN 62631-1:2011
ICS:
29.035.01 Izolacijski materiali na Insulating materials in
splošno general
SIST EN 62631-1:2011 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62631-1:2011

---------------------- Page: 2 ----------------------

SIST EN 62631-1:2011

EUROPEAN STANDARD
EN 62631-1

NORME EUROPÉENNE
June 2011
EUROPÄISCHE NORM

ICS 29.035.01 Supersedes HD 429 S1:1983 (partially), HD 438 S1:1984 (partially), HD 568 S1:1990 (partially)


English version


Dielectric and resistive properties of solid insulating materials -
Part 1: General
(IEC 62631-1:2011)


Propriétés diélectriques et résistives des Dielektrische und resistive Eigenschaften
matériaux isolants solides - fester Elektroisolierstoffe -
Partie 1: Généralités Teil 1: Grundlagen
(CEI 62631-1:2011) (IEC 62631-1:2011)




This European Standard was approved by CENELEC on 2011-06-02. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62631-1:2011 E

---------------------- Page: 3 ----------------------

SIST EN 62631-1:2011
EN 62631-1:2011 - 2 -
Foreword
The text of document 112/169/FDIS, future edition 1 of IEC 62631-1, prepared by IEC TC 112, Evaluation
and qualification of electrical insulating materials and systems, was submitted to the IEC-CENELEC
parallel vote and was approved by CENELEC as EN 62631-1 on 2011-06-02.
This European Standard partially supersedes HD 429 S1:1983, HD 438 S1:1984 and HD 568 S1:1990.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2012-03-02
– latest date by which the national standards conflicting
(dow) 2014-06-02
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62631-1:2011 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60216-1 NOTE  Harmonized as EN 60216-1.
IEC 60247 NOTE  Harmonized as EN 60247.
IEC 60505 NOTE  Harmonized as EN 60505.
__________

---------------------- Page: 4 ----------------------

SIST EN 62631-1:2011
- 3 - EN 62631-1:2011
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

IEC 60050-212 - International Electrotechnical Vocabulary - -
(IEV) -
Chapter 212: Insulating solids, liquids and
gases


IEC 60093 1980 Methods of test for volume resistivity and HD 429 S1 1983
surface resistivity of solid electrical insulating
materials


IEC 60167 1964 Methods of test for the determination of the HD 568 S1 1990
insulation resistance of solid insulating
materials


IEC 60250 1969 Recommended methods - -
for the determination of the permittivity and
dielectric dissipation factor of electrical
insulating materials at power, audio and radio
frequencies including metre wavelengths


IEC 60345 1971 Method of test for electrical resistance and HD 438 S1 1984
resistivity of insulating materials at elevated
temperatures


IEC 60377-1 1973 Methods for the determination - -
of the dielectric properties of insulating
materials at frequencies above 300 MHz -
Part 1: General


IEC 60377-2 1977 Methods for the determination of the dielectric - -
properties of insulating materials at
frequencies above 300 MHz -
Part 2: Resonance methods


ISO 291 - Plastics - Standard atmospheres for EN ISO 291 -
conditioning and testing


ISO 558 - Conditioning and testing - Standard - -
atmospheres - Definitions

---------------------- Page: 5 ----------------------

SIST EN 62631-1:2011

---------------------- Page: 6 ----------------------

SIST EN 62631-1:2011
IEC 62631-1
®

Edition 1.0 2011-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE


Dielectric and resistive properties of solid insulating materials –
Part 1: General

Propriétés diélectriques et résistives des matériaux isolants solides –
Partie 1: Généralités

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX Q
ICS 29.035.01 ISBN 978-2-88912-477-0

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------

SIST EN 62631-1:2011
– 2 – 62631-1  IEC:2011
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
3.1 General definitions . 7
3.2 Definitions for resistive properties . 7
3.3 Definitions for dielectric properties . 7
4 Factors influencing properties of electrical insulating materials . 11
4.1 General . 11
4.2 Factors influencing resistive and dielectric properties . 11
4.2.1 General . 11
4.2.2 Time . 12
4.2.3 Frequency . 12
4.2.4 Temperature . 13
4.2.5 Moisture . 14
4.2.6 Electric field strength . 14
4.2.7 Voltage . 14
4.2.8 Conditioning . 14
4.2.9 Test specimen . 14
4.2.10 Electrode material . 14
5 Electrode systems . 14
6 Test procedures . 15
Bibliography . 16

Figure 1 – Dielectric dissipation factor . 9
Figure 2 – Equivalent circuit diagrams . 9
Figure 3 – Influence of frequency ω = 2πf on permittivity and dielectric dissipation
factor tan δ . 13
Figure 4 – Example of the influence of temperature on the permittivity and dielectric
dissipation factors . 13

Table 1 – Planned structure of IEC 62631 . 5

---------------------- Page: 8 ----------------------

SIST EN 62631-1:2011
62631-1  IEC:2011 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

DIELECTRIC AND RESISTIVE PROPERTIES
OF SOLID INSULATING MATERIALS –

Part 1: General


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62631-1 has been prepared by IEC technical committee 112:
Evaluation and qualification of electrical insulating materials and systems.
This International Standard, together with its future parts, is intended to replace certain
standards as set out and explained in the Introduction.
Such standards will, however, remain valid until the respective part of IEC 62631 is published.
The text of this standard is based on the following documents:
FDIS Report on voting
112/169/FDIS 112/176/RVD

Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.

---------------------- Page: 9 ----------------------

SIST EN 62631-1:2011
– 4 – 62631-1  IEC:2011
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.

---------------------- Page: 10 ----------------------

SIST EN 62631-1:2011
62631-1  IEC:2011 – 5 –
INTRODUCTION
The IEC 62631 series is divided into four main parts, which are further subdivided into
component parts. The present Part 1 of IEC 62631 considers, general aspects related to the
measurement of dielectric and resistive properties of solid electric insulating materials. Parts
2 and 3 outline basic procedures for the measurement of dielectric and resistive properties by
means of AC and DC methods. These parts will gradually replace hitherto existing
International Standards. Part 4 will cover special methods of measurement and computational
methods.
Table 1 shows the planned future structure of IEC 62631, together with the standards it will
replace.
Table 1 – Planned structure of IEC 62631
Main title DIELECTRIC AND RESISTIVE PROPERTIES OF SOLID INSULATING MATERIALS
Part number Part title Remarks
IEC 62631-1 – General Amends and replaces
IEC 60093, IEC 60167,
IEC 60250, IEC 60345
IEC 62631-2 New
– Permittivity and dielectric dissipation factors
  (AC methods)
IEC 62631-2-1 – Technical frequencies (1 Hz to 100 MHz) Replaces IEC 60250
IEC 62631-2-2 – High frequencies (1 MHz to 300 MHz) Replaces IEC 60250
IEC 62631-2-3 – Very high frequencies (above 300 MHz) Replaces IEC 60377-1
and IEC 60377-2
IEC 62631-2-4 – Low frequencies (1 MHz to 1 kHz) New
IEC 62631-3 New
– Resistive properties (DC methods)
IEC 62631-3-1 – Volume resistance and volume resistivity Replaces IEC 60093
IEC 62631-3-2 – Surface resistance and surface resistivity Replaces IEC 60093
IEC 62631-3-3 – Insulation resistance Replaces IEC 60167
IEC 62631-3-4 – Special requirements for the determination of resistive material Replaces IEC 60345
properties at elevated temperatures
IEC 62631-4 New
– Special methods
IEC 62631-4-1 – Computational methods for the evaluation of data gained by the New
use of broadband dielectric spectrometers
IEC 62631-4-2 – Thermal analysis by means of observation of dielectric properties New

Measured values of dielectric and resistive properties of solid insulating materials are
dependent upon different factors such as the magnitude and time of voltage application,
frequency, the nature and geometry of the electrodes, the surface condition, contamination,
temperature and humidity of the ambient atmosphere and of the specimens during
conditioning and measurement and, in certain cases, on electric field strength also.
Therefore, the electrical and dielectric properties covered by the IEC 62631 series may only
be comparable as far as the circumstances of the measurement’s parameters are stipulated.
The test specimen’s shape and dimensions, as well as the measurement parameters, may be
defined in product standards or the relevant parts of this series of standards dealing with test
procedures, depending on the requirements to be considered for a certain demand of
measurement. Care should be taken when using measured values from the IEC 62631 series
for the purposes of designing an electric product.
NOTE It is not possible to give a comprehensive overview covering the dielectric and resistive properties of solid
electrical insulating materials within a framework of an International Standard. Therefore, the user is encouraged to
read up on the literature such as that recommended in the bibliography.

---------------------- Page: 11 ----------------------

SIST EN 62631-1:2011
– 6 – 62631-1  IEC:2011
DIELECTRIC AND RESISTIVE PROPERTIES
OF SOLID INSULATING MATERIALS –

Part 1: General



1 Scope
This part of IEC 62631 gives general guidelines for the determination of dielectric and
resistive properties of solid electrical insulating materials.
2 Normative references
The following referenced documents are indispensable for the application of this document.
For dated references, only the edition cited applies. For undated references, the latest edition
of the referenced document (including any amendments) applies.
IEC 60050-212, International Electrotechnical Vocabulary – Part 212: Electrical insulating
solids, liquids and gases
NOTE For IEC 60050, free online access is provided by www.electropedia.org.
IEC 60093:1980, Methods of test for volume resistivity and surface resistivity of solid
electrical insulating materials
IEC 60167:1964, Methods of test for the determination of the insulation resistance of solid
insulating materials
IEC 60250:1969, Recommended methods for the determination of the permittivity and
dielectric dissipation factor of electrical insulating materials at power, audio and radio
frequencies including metre wavelengths
IEC 60345:1971, Method of test for electrical resistance and resistivity of insulating materials
at elevated temperatures
IEC 60377-1:1973, Recommended methods for the determination of the dielectric properties
of insulating materials at frequencies above 300 MHz – Part 1: General
IEC 60377-2:1977, Recommended methods for the determination of the dielectric properties
of insulating materials at frequencies above 300 MHz – Part 2: Resonance methods
ISO 291, Plastics – Standard atmospheres for conditioning and testing
ISO 558, Conditioning and testing – Standard atmospheres – Definitions
3 Terms and definitions
For the purposes of this document, the following terms and definitions, as well
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.