iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST ENV 1996-1-2:2004

(Main)

Eurocode 6: Design of masonry structures - Part 1-2: General rules - Structural fire design

Eurocode 6: Design of masonry structures - Part 1-2: General rules - Structural fire design

Migrated from Progress Sheet (TC Comment) (2000-07-10): All dates refer to ENV. No Enquiry nor standstill. ++ Dates of ENV taken out bec. of 2-Y-R; REAL32=9211,REAL40/REAL49=9403, REAL41/51 ++ = 9406, REAL60 = 9507.

Eurocode 6: Bemessung und Konstruktion von Mauerwerksbauten - Teil 1-2: Allgemeine Regeln - Tragwerksbemessung für den Brandfall

Eurocode 6: Calcul des ouvrages en maçonnerie - Partie 1-2: Regles générales - Calcul du comportement au feu

Eurocode 6: Projektiranje zidanih konstrukcij – 1-2. del: Splošna pravila – Projektiranje požarnovarnih konstrukcij

General Information

Status
Withdrawn
Publication Date
31-Aug-2004
Withdrawal Date
30-Sep-2005
ICS
13.220.50 - Fire-resistance of building materials and elements
91.010.30 - Technical aspects
91.080.30 - Masonry
Technical Committee
KON - Structures
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Oct-2005
Due Date
01-Oct-2005
Completion Date
01-Oct-2005
Directive
89/106/EEC - Construction products
Mandate
M/BC/CEN/89/11 - Framework mandate to CEN on Eurocode work : execution of a standardization programme on Eurocodes for the structural design of building and civil engineering works
Ref Project
ENV 1996-1-2:1995 - Eurocode 6: Design of masonry structures - Part 1-2: General rules - Structural fire design

Relations

Replaced By
SIST EN 1996-1-2:2005 - Eurocode 6 - Design of masonry structures - Part 1-2: General rules - Structural fire design
Effective Date
01-Oct-2005

Buy Standard

ENV 1996-1-2:2004ENV 1996-1-2:2004
PreviousNext
Standardization document
ENV 1996-1-2:2004
English language
29 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST ENV 1996-1-2:2004
01-september-2004
Eurocode 6: Projektiranje zidanih konstrukcij – 1-2. del: Splošna pravila –
Projektiranje požarnovarnih konstrukcij
Eurocode 6: Design of masonry structures - Part 1-2: General rules - Structural fire
design
Eurocode 6: Bemessung und Konstruktion von Mauerwerksbauten - Teil 1-2: Allgemeine
Regeln - Tragwerksbemessung für den Brandfall
Eurocode 6: Calcul des ouvrages en maçonnerie - Partie 1-2: Regles générales - Calcul
du comportement au feu
Ta slovenski standard je istoveten z: ENV 1996-1-2:1995
ICS:
13.220.50 Požarna odpornost Fire-resistance of building
gradbenih materialov in materials and elements
elementov
91.010.30 7HKQLþQLYLGLNL Technical aspects
91.080.30 Zidane konstrukcije Masonry
SIST ENV 1996-1-2:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ENV 1996-1-2:2004

---------------------- Page: 2 ----------------------

SIST ENV 1996-1-2:2004

---------------------- Page: 3 ----------------------

SIST ENV 1996-1-2:2004

---------------------- Page: 4 ----------------------

SIST ENV 1996-1-2:2004

---------------------- Page: 5 ----------------------

SIST ENV 1996-1-2:2004

---------------------- Page: 6 ----------------------

SIST ENV 1996-1-2:2004

---------------------- Page: 7 ----------------------

SIST ENV 1996-1-2:2004

---------------------- Page: 8 ----------------------

SIST ENV 1996-1-2:2004

---------------------- Page: 9 ----------------------

SIST ENV 1996-1-2:2004

---------------------- Page: 10 ----------------------

SIST ENV 1996-1-2:2004

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 1996-1-2:2005/AC:2011(Corrigendum)
Eurocode 6 - Design of masonry structures - Part 1-2: General rules - Structural fire design
EN 1996-1-2:2005/AC:2010

(1)P This Part 1-2 of EN 1996 deals with the design of masonry structures for the accidental situation of fire exposure, and is intended to be used in conjunction with EN 1996-1-1, EN 1996-2, 1996-3 and EN 1991-1-2. This part 1-2 only identifies differences from, or supplements to, normal temperature design.
(2)P This Part 1-2 deals only with passive methods of fire protection. Active methods are not
covered.
(3)P This Part 1-2 applies to masonry structures which, for reasons of general fire safety, are required to fulfil certain functions when exposed to fire, in terms of:
- avoiding premature collapse of the structure (load bearing function)
- limiting fire spread (flames, hot gases, excessive heat) beyond designated areas (separating function)
(4)P This Part 1-2 gives principles and application rules for designing structures for specified requirements in respect of the aforementioned functions and levels of performance.
(5)P This Part 1-2 applies to structures, or parts of structures, that are within the scope of EN 1996-1-1, EN 1996-2 and EN 1996-3 and are designed accordingly.
(6)P This Part 1-2 does not cover masonry built with Natural Stone units to EN771-6
(7)P This Part 1-2 deals with the following:
- non-loadbearing internal walls.
- non-loadbearing external walls.
- loadbearing internal walls with separating or non-separating functions.
- loadbearing external walls with separating or non-separating functions.

  • Corrigendum
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1996-1-2:2005(Main)
Eurocode 6 - Design of masonry structures - Part 1-2: General rules - Structural fire design
EN 1996-1-2:2005

(1)P This Part 1-2 of EN 1996 deals with the design of masonry structures for the accidental situation of fire exposure, and is intended to be used in conjunction with EN 1996-1-1, EN 1996-2, 1996-3 and EN 1991-1-2. This part 1-2 only identifies differences from, or supplements to, normal temperature design.
(2)P This Part 1-2 deals only with passive methods of fire protection. Active methods are not covered.
(3)P This Part 1-2 applies to masonry structures which, for reasons of general fire safety, are required to fulfil certain functions when exposed to fire, in terms of:
-   avoiding premature collapse of the structure (load bearing function)
-   limiting fire spread (flames, hot gases, excessive heat) beyond designated areas (separating function)
(4)P This Part 1-2 gives principles and application rules for designing structures for specified requirements in respect of the aforementioned functions and levels of performance.
(5)P This Part 1-2 applies to structures, or parts of structures, that are within the scope of EN 1996-1-1, EN 1996-2 and EN 1996-3 and are designed accordingly.
(6)P This Part 1-2 does not cover masonry built with Natural Stone units to EN771-6
(7)P This Part 1-2 deals with the following:
-   non-loadbearing internal walls.
-   non-loadbearing external walls.
-   loadbearing internal walls with separating or non-separating functions.
-   loadbearing external walls with separating or non-separating functions.

  • Standard
    81 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 1996-1-2:2022(Main)
Eurocode 6 - Design of masonry structures - Part 1-2: General rules - Structural fire design
prEN 1996-1-2

1.1   Scope of prEN 1996-1-2
(1) This document gives rules for the design of masonry structures for the accidental situation of fire exposure. This document only identifies differences from, or supplements to, normal temperature design.
(2) This document applies to structures, or parts of structures, that are within the scope of EN 1996-1-1 or EN 1996-3 and are designed accordingly.
(3) This document gives rules for the design of structures for specified requirements in respect of the aforementioned functions and the levels of performance.
(5) This document does not cover masonry built with natural stone units according to EN 771-6.
(6) This document deals with:
-   non-loadbearing internal walls;
-   non-loadbearing external walls;
-   loadbearing internal walls with separating or non-separating functions;
-   loadbearing external walls with separating or non-separating functions.
1.2   Assumptions
(1) The assumptions of EN 1990 and EN 1996-1-1 apply to this document.
(2) This document is intended to be used together with EN 1990, EN 1991-1-2, EN 1996-1-1, EN 1996 2 and EN 1996-3.
(3) In addition to the general assumptions of EN 1990 and EN 1996-1-1, the following assumptions apply:
-   the choice of the relevant design fire scenario is made by appropriate qualified and experienced personnel, or is given by the relevant national regulation;
-   any fire protection measure taken into account in the design will be adequately maintained.

  • Draft
    87 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1996-1-2:2005/AC:2011(Corrigendum)
Eurocode 6 - Design of masonry structures - Part 1-2: General rules - Structural fire design
EN 1996-1-2:2005/AC:2010

(1)P This Part 1-2 of EN 1996 deals with the design of masonry structures for the accidental situation of fire exposure, and is intended to be used in conjunction with EN 1996-1-1, EN 1996-2, 1996-3 and EN 1991-1-2. This part 1-2 only identifies differences from, or supplements to, normal temperature design.
(2)P This Part 1-2 deals only with passive methods of fire protection. Active methods are not
covered.
(3)P This Part 1-2 applies to masonry structures which, for reasons of general fire safety, are required to fulfil certain functions when exposed to fire, in terms of:
- avoiding premature collapse of the structure (load bearing function)
- limiting fire spread (flames, hot gases, excessive heat) beyond designated areas (separating function)
(4)P This Part 1-2 gives principles and application rules for designing structures for specified requirements in respect of the aforementioned functions and levels of performance.
(5)P This Part 1-2 applies to structures, or parts of structures, that are within the scope of EN 1996-1-1, EN 1996-2 and EN 1996-3 and are designed accordingly.
(6)P This Part 1-2 does not cover masonry built with Natural Stone units to EN771-6
(7)P This Part 1-2 deals with the following:
- non-loadbearing internal walls.
- non-loadbearing external walls.
- loadbearing internal walls with separating or non-separating functions.
- loadbearing external walls with separating or non-separating functions.

  • Corrigendum
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1996-1-2:2005(Main)
Eurocode 6 - Design of masonry structures - Part 1-2: General rules - Structural fire design
EN 1996-1-2:2005

(1)P This Part 1-2 of EN 1996 deals with the design of masonry structures for the accidental situation of fire exposure, and is intended to be used in conjunction with EN 1996-1-1, EN 1996-2, 1996-3 and EN 1991-1-2. This part 1-2 only identifies differences from, or supplements to, normal temperature design.
(2)P This Part 1-2 deals only with passive methods of fire protection. Active methods are not covered.
(3)P This Part 1-2 applies to masonry structures which, for reasons of general fire safety, are required to fulfil certain functions when exposed to fire, in terms of:
-   avoiding premature collapse of the structure (load bearing function)
-   limiting fire spread (flames, hot gases, excessive heat) beyond designated areas (separating function)
(4)P This Part 1-2 gives principles and application rules for designing structures for specified requirements in respect of the aforementioned functions and levels of performance.
(5)P This Part 1-2 applies to structures, or parts of structures, that are within the scope of EN 1996-1-1, EN 1996-2 and EN 1996-3 and are designed accordingly.
(6)P This Part 1-2 does not cover masonry built with Natural Stone units to EN771-6
(7)P This Part 1-2 deals with the following:
-   non-loadbearing internal walls.
-   non-loadbearing external walls.
-   loadbearing internal walls with separating or non-separating functions.
-   loadbearing external walls with separating or non-separating functions.

  • Standard
    81 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 1996-1-2:2022(Main)
Eurocode 6 - Design of masonry structures - Part 1-2: General rules - Structural fire design
prEN 1996-1-2

1.1   Scope of prEN 1996-1-2
(1) This document gives rules for the design of masonry structures for the accidental situation of fire exposure. This document only identifies differences from, or supplements to, normal temperature design.
(2) This document applies to structures, or parts of structures, that are within the scope of EN 1996-1-1 or EN 1996-3 and are designed accordingly.
(3) This document gives rules for the design of structures for specified requirements in respect of the aforementioned functions and the levels of performance.
(5) This document does not cover masonry built with natural stone units according to EN 771-6.
(6) This document deals with:
-   non-loadbearing internal walls;
-   non-loadbearing external walls;
-   loadbearing internal walls with separating or non-separating functions;
-   loadbearing external walls with separating or non-separating functions.
1.2   Assumptions
(1) The assumptions of EN 1990 and EN 1996-1-1 apply to this document.
(2) This document is intended to be used together with EN 1990, EN 1991-1-2, EN 1996-1-1, EN 1996 2 and EN 1996-3.
(3) In addition to the general assumptions of EN 1990 and EN 1996-1-1, the following assumptions apply:
-   the choice of the relevant design fire scenario is made by appropriate qualified and experienced personnel, or is given by the relevant national regulation;
-   any fire protection measure taken into account in the design will be adequately maintained.

  • Draft
    87 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12153:2023(Main)
Curtain walling - Air permeability - Test method
EN 12153:2023

This document defines the method to be used to determine the air permeability of curtain walling, both its fixed and openable parts. It describes how the specimen shall be tested under positive and negative air pressure.
NOTE   This document applies to any curtain walling product as defined in EN 13830.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST IEC 60050-811:2023/A1:2023(Amendment)
Amendment 1: International Electrotechnical Vocabulary (IEV) - Part 811: Electric traction
IEC 60050-811:2017/AMD1:2021
  • Standard
    3 pages
    English and French language
    sale 15% off
  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61340-2-3:2016/AC:2023(Corrigendum)
Electrostatics - Part 2-3: Methods of test for determining the resistance and resistivity of solid materials used to avoid electrostatic charge accumulation (IEC 61340-2-3:2016/COR1:2023)
EN 61340-2-3:2016/AC:2023-08
  • Corrigendum
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 14002-2:2023(Main)
Environmental management systems - Guidelines for using ISO 14001 to address environmental aspects and conditions within an environmental topic area - Part 2: Water (ISO 14002-2:2023)
EN ISO 14002-2:2023

This document gives general guidelines for organizations seeking to address water-related environmental aspects, environmental impacts, environmental conditions, and the associated risks and opportunities within an environmental management system in accordance with ISO 14001.
The document addresses issues for environmental management related to water quantity and quality, such as water withdrawal, efficient use of water, and water discharge, as well as approaches to cope with water-related events such as flooding and droughts. The document considers the interconnections of water with other environmental media and takes a holistic approach to the management of water due to its impacts on ecosystems, ecosystem services, related biodiversity, as well as human life and well-being.
This document is applicable to organizations irrespective of their size, type, financial resources, location and sector. It is applicable to all types of water and considers a life cycle perspective.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day