SIST EN 683-2:2007

Aluminium and aluminium alloys - Finstock - Part 2: Mechanical properties

This document specifies the mechanical properties of wrought aluminium and wrought aluminium alloy finstock.
The chemical composition limits of these materials are specified in EN 573-3, unless otherwise agreed between supplier and purchaser.
The designations of wrought aluminium and wrought aluminium alloys and the temper designations used in this standard are specified in EN 573-3, and the temper designations are defined in EN 515.

Aluminium und Aluminiumlegierungen - Vormaterial für Wärmeaustauscher (Finstock) - Teil 2: Mechanische Eigenschaften

Aluminium et alliages d'aluminium - Bandes pour échangeurs thermiques - Partie 2 : Caractéristiques mécaniques

Cette Norme européenne prEN 683-2:2004 prescrit les caractéristiques mécaniques des bandes pour échangeurs thermiques en aluminium et alliages d'aluminium corroyés.
Les limites de la composition chimique de ces matériaux sont données dans la norme EN 573-3, sauf accord contraire entre le fournisseur et l'acheteur.
La désignation de l'aluminium et des alliages d'aluminium, ainsi que la désignation des états métallurgiques utilisées dans la présente norme européenne sont spécifiées respectivement a l'EN 573-3 et 4 et a l'EN 515.
NOTE   Certains des produits énumérés dans le présent document peuvent etre l'objet de brevets ou de demandes de brevets ; leur mention n'implique en aucune maniere qu'une licence ait été accordée dans le cadre du droit des brevets.
La politique affirmée du CEN/TC 132 est que si celui qui déteint le brevet refuse d'accorder la licence pour des produits normalisés dans des conditions normales et non discriminatoires, les produits correspondants seront retirés du document.

Aluminij in aluminijeve zlitine - Hladno valjani polizdelki za toplotne izmenjevalnike - 2. del: Mehanske lastnosti

General Information

• Status: Withdrawn
• Publication Date: 28-Feb-2007
• Withdrawal Date: 16-Apr-2024
• ICS: 77.150.10 - Aluminium products
• Technical Committee: INEK - Nonferrous metals
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 15-Apr-2024
• Due Date: 08-May-2024
• Completion Date: 17-Apr-2024
• Directive: 89/106/EEC - Construction products
• Mandate: M/120 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on structural metallic products and ancillaries
• Ref Project: EN 683-2:2006 - Aluminium and aluminium alloys - Finstock - Part 2: Mechanical properties

Relations

• Replaces: SIST EN 683-2:1998 - Aluminium and aluminium alloys - Finstock - Part 2: Mechanical properties
• Effective Date: 22-Dec-2008
• Revises: SIST EN 683-2:2024 - Aluminium and aluminium alloys - Finstock - Part 2: Mechanical properties
• Effective Date: 19-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aluminium and aluminium alloys - Finstock - Part 2: Mechanical propertiesAluminij in aluminijeve zlitine - Hladno valjani polizdelki za toplotne izmenjevalnike - 2. del: Mehanske lastnostiAluminium et alliages d'aluminium - Bandes pour échangeurs thermiques - Partie 2 : Caractéristiques mécaniquesAluminium und Aluminiumlegierungen - Vormaterial für Wärmeaustauscher (Finstock) - Teil 2: Mechanische EigenschaftenTa slovenski standard je istoveten z:EN 683-2:2006SIST EN 683-2:2007en77.150.10Aluminijski izdelkiAluminium productsICS:SIST EN 683-2:19981DGRPHãþDSLOVENSKI
STANDARDSIST EN 683-2:200701-marec-2007







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 683-2December 2006ICS 77.150.10Supersedes EN 683-2:1996
English VersionAluminium and aluminium alloys - Finstock - Part 2: MechanicalpropertiesAluminium et alliages d'aluminium - Bandes pouréchangeurs thermiques - Partie 2 : CaractéristiquesmécaniquesAluminium und Aluminiumlegierungen - Vormaterial fürWärmeaustauscher (Finstock) - Teil 2: MechanischeEigenschaftenThis European Standard was approved by CEN on 25 November 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 683-2:2006: E



EN 683-2:2006 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Tensile testing.4 4 Mechanical properties.6 5 Rounding of test results.6 Annex A (normative)
Rules for rounding.11 Bibliography.12
Figures Figure 1 — Parallel sided test piece.5 Figure 2 — Example of double-bladed cutter.5
Tables Table 1 — Mechanical properties for finstock (H14, H16, H18, H19).7 Table 2 — Mechanical properties for finstock (O, H22, H24).9



EN 683-2:2006 (E) 3 Foreword This document (EN 683-2:2006) has been prepared by Technical Committee CEN/TC 132 “Aluminium and aluminium alloys”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2007, and conflicting national standards shall be withdrawn at the latest by June 2007. This document supersedes EN 683-2:1996. Within its program of work, Technical Committee CEN/TC 132 entrusted CEN/TC 132/WG 6 "Foil and finstock" to revise EN 683-2:1996. The following modifications have been made:  Table 1 has been split into Table 1 and Table
...

EUROPEAN STANDARD
DRAFT
prEN 683-2
NORME EUROPÉENNE

EUROPÄISCHE NORM

January 2005
ICS  Will supersede EN 683-2:1996
English version
Aluminium and aluminium alloys - Finstock - Part 2: Mechanical
properties
Aluminium et alliages d'aluminium - Bandes pour Aluminium und Aluminiumlegierungen - Vormaterial für
échangeurs thermiques - Partie 2: Caractéristiques Wärmeraustauscher (Finstock) - Teil 2: Mechanische
mécaniques Eigenschaften
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 132.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 683-2:2005: E
worldwide for CEN national Members.

---------------------- Page: 1 ----------------------
prEN 683-2:2005 (E)
Contents Page
Foreword.3
1 Scope.4
2 Normative references.4
3 Tensile testing.4
4 Mechanical properties.6
5 Rounding of test results .6
Annex A (normative) Rules for rounding.11
Bibliography .12

2

---------------------- Page: 2 ----------------------
prEN 683-2:2005 (E)
Foreword
This document (prEN 683-2:2005) has been prepared by Technical Committee CEN/TC 132 “Aluminium and
aluminium alloys”, the secretariat of which is held by AFNOR.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 683-2:1996.
EN 683 comprises the following parts under the general title "Aluminium and aluminium alloys — Finstock":
 Part 1: Technical conditions for inspection and delivery
 Part 2: Mechanical properties
 Part 3: Tolerances on dimensions and form
3

---------------------- Page: 3 ----------------------
prEN 683-2:2005 (E)
1 Scope
This European Standard prEN 683-2:2004 specifies the mechanical properties of wrought aluminium and
aluminium alloy finstock.
The chemical composition limits of these materials are specified in EN 573-3, unless otherwise agreed
between supplier and purchaser.
The designations of wrought aluminium and aluminium alloys and the temper designations used in this
standard are specified in EN 573 Parts 3 and 4 and the temper designation are defined in EN 515.
NOTE Some of the products listed in the present standard can be subject to patent or patent applications, and their
listing herein does not in any way imply the granting of a licence under such patent right.
CEN/TC 132 affirms its policy that in the case when a patentee refuses to grant licenses on standardised standard
products under reasonable and not discriminatory conditions, then this product shall be removed from the corresponding
standard.
2 Normative references
The following referenced documents are in
...