SIST ISO 7043:1996

Prevailing torque type hexagon nuts with flange (with non-metallic insert)

Écrous hexagonaux à embase cylindro-tronconique, à freinage interne, à couple préalable (avec anneau non métallique)

Šestrobe zaščitne matice s plastičnim vložkom in poševnim krajcem

General Information

• Status: Withdrawn
• Publication Date: 31-Mar-1996
• Withdrawal Date: 15-Jul-2009
• ICS: 21.060.20 - Nuts
• Technical Committee: I12 - Imaginarni 12 Imaginarni TC za ISO področje - vzdrževani privzeti ISO standardi
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 15-Jul-2009
• Due Date: 07-Aug-2009
• Completion Date: 16-Jul-2009
• Ref Project: ISO 7043:1983 - Prevailing torque type hexagon nuts with flange (with non-metallic insert)

Standards Content (Sample)

International Standard 7043
INTERNATIONAL ORGANIZATION FOR STANDARDlZATION*MEMYHAPOI1HAR OPTAHH3AUHR Il0 CTAHIIAPTH3AUllH.ORGANlSATlON INTERNATIONALE DE NORMALISATION
Prevailing torque type hexagon nuts with flange (with
e
non-metallic insert)
Écrous hexagonaux à embase cylindro-tronconique, à freinage interne, à couple préalable (avec anneau non métallique)
First edition - 1983-09-01
- w UDC 621.882.31 Ref. No. IS0 7043-1983 (E)
Descriptors : fasteners, nuts (fasteners), hexagonal nuts with flange, hexagonal nuts, specifications, dimensions, designation.
6
B
Price based on 4 pages

---------------------- Page: 1 ----------------------
Foreword
IS0 (the International Organization for Standardization) is a worldwide federation of
national standards bodies (IS0 member bodies). The work of developing International
Standards is carried out through IS0 technical committees. Every member body
interested in a subject for which a technical committee has been authorized has the
right to be represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the IS0 Council.
International Standard IS0 7043 was developed by Technical Committee ISO/TC 2,
Fasteners, and was circulated to the member bodies in December 1981.
It has been approved by the member bodies of the following countries:
Australia
Germany, F.R. New Zealand
Belgium Hungary Norway
Brazil India Poland
Canada Ireland Romania
China Italy South Africa, Rep. of
Czechoslovakia Japan Spain
Denmark Korea, Dem. P. Rep. of Sri Lanka
Egypt, Arab Rep. of Korea, Rep. of Sweden
Finland Mexico Switzerland
France Netherlands USA
The member bodies of the following countries expressed disapproval of the document
on technical grounds:
United Kingdom
USSR
O
International Organization for Standardization, 1983
Printed in Switzerland

---------------------- Page: 2 ----------------------
IS0 7043-1983 (E)
I NTE R N AT1 O N AL STAN DARD
Prevailing torque type hexagon nuts with flange (with
non-metallic insert)
1 Scope and field of application
This International Standard specifies the characteristics of prevailing torque type hexagon nuts with flange and non-metallic annular
insert and thread sizes from M 5 to M 20 inclusive, in product grade A.
NOTE - The dimensions of the nuts correspond to those given in IS0 4161 plus prevailing torque feature.
If other specifications are required, it is recommended that they should be selected from existing International Standards, for example
IS0 261, IS0 898, IS0 965, IS0 2320, IS0 4759/1.
2 References
IS0 225, Fasteners - Bolts, screws, studs and nuts - Symbols and designations of dimensions.
IS0 261, fS0 general purpose metric screw threads - General plan.
IS0 898, Mechanical properties of fasteners.
IS0 965, IS0 general purpose metric screw threads - Toierances.
IS0 2320, Prevailing torque type steel hexagon nuts - Mechanical and performance properties.
IS0 3269, Fasteners - Acceptance inspection. 1)
IS0 4042, Threaded components - Electroplated coatings components. 1)
IS0 4161, Hexagon nuts with flange - Product grade A.
IS0 4759t1, Tolerances for fasteners - Part 1: Bolts, screws and nuts with thread diameters 1,6 and < 150 mm and product
grades A, B and C.
1) At present at the stage of draft.
1

---------------------- Page: 3 ----------------------
SO 7043-1983 (E)
3 Dimensions
O
O
\
cw
P
O
$\
v/ -
t
15Oto 30" 7
/
\
a
15"to 25"
Di
...

SLOVENSKI STANDARD
SIST ISO 7043:1996
01-april-1996
âHVWUREH]DãþLWQHPDWLFHVSODVWLþQLPYORåNRPLQSRãHYQLPNUDMFHP
Prevailing torque type hexagon nuts with flange (with non-metallic insert)
Écrous hexagonaux à embase cylindro-tronconique, à freinage interne, à couple
préalable (avec anneau non métallique)
Ta slovenski standard je istoveten z: ISO 7043:1983
ICS:
21.060.20 Matice Nuts
SIST ISO 7043:1996 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO 7043:1996

---------------------- Page: 2 ----------------------

SIST ISO 7043:1996
International Standard 7043
INTERNATIONAL ORGANIZATION FOR STANDARDlZATION*MEMYHAPOI1HAR OPTAHH3AUHR Il0 CTAHIIAPTH3AUllH.ORGANlSATlON INTERNATIONALE DE NORMALISATION
Prevailing torque type hexagon nuts with flange (with
e
non-metallic insert)
Écrous hexagonaux à embase cylindro-tronconique, à freinage interne, à couple préalable (avec anneau non métallique)
First edition - 1983-09-01
- w UDC 621.882.31 Ref. No. IS0 7043-1983 (E)
Descriptors : fasteners, nuts (fasteners), hexagonal nuts with flange, hexagonal nuts, specifications, dimensions, designation.
6
B
Price based on 4 pages

---------------------- Page: 3 ----------------------

SIST ISO 7043:1996
Foreword
IS0 (the International Organization for Standardization) is a worldwide federation of
national standards bodies (IS0 member bodies). The work of developing International
Standards is carried out through IS0 technical committees. Every member body
interested in a subject for which a technical committee has been authorized has the
right to be represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the IS0 Council.
International Standard IS0 7043 was developed by Technical Committee ISO/TC 2,
Fasteners, and was circulated to the member bodies in December 1981.
It has been approved by the member bodies of the following countries:
Australia
Germany, F.R. New Zealand
Belgium Hungary Norway
Brazil India Poland
Canada Ireland Romania
China Italy South Africa, Rep. of
Czechoslovakia Japan Spain
Denmark Korea, Dem. P. Rep. of Sri Lanka
Egypt, Arab Rep. of Korea, Rep. of Sweden
Finland Mexico Switzerland
France Netherlands USA
The member bodies of the following countries expressed disapproval of the document
on technical grounds:
United Kingdom
USSR
O
International Organization for Standardization, 1983
Printed in Switzerland

---------------------- Page: 4 ----------------------

SIST ISO 7043:1996
IS0 7043-1983 (E)
I NTE R N AT1 O N AL STAN DARD
Prevailing torque type hexagon nuts with flange (with
non-metallic insert)
1 Scope and field of application
This International Standard specifies the characteristics of prevailing torque type hexagon nuts with flange and non-metallic annular
insert and thread sizes from M 5 to M 20 inclusive, in product grade A.
NOTE - The dimensions of the nuts correspond to those given in IS0 4161 plus prevailing torque feature.
If other specifications are required, it is recommended that they should be selected from existing International Standards, for example
IS0 261, IS0 898, IS0 965, IS0 2320, IS0 4759/1.
2 References
IS0 225, Fasteners - Bolts, screws, studs and nuts - Symbols and designations of dimensions.
IS0 261, fS0 general purpose metric screw threads - General plan.
IS0 898, Mechanical properties of fasteners.
IS0 965, IS0 general purpose metric screw threads - Toierances.
IS0 2320, Prevailing torque type steel hexagon nuts - Mechanical and performance properties.
IS0 3269, Fasteners - Acceptance inspection. 1)
IS0 4042, Threaded components - Electroplated coatings components. 1)
IS0 4161, Hexagon nuts with flange - Product grade A.
IS0 4759t1,
...

Norme internationale 7043
INTERNATIONAL ORGANIZATION FOR STANDARDlZATION*MEXAYHAPOJlHAR OPTAHH3AUHR fl0 CTAHJlAPTH3AULOH.ORGANlSAtlON INTERNATIONALE DE NORMALISATION
Écrous hexagonaux à embase cylindro-tronconique, à
0
freinage interne, à couple préalable (avec anneau non
métallique)
Prevailing torque type hexagon nuts with flange (with non-metallic insertl
Première édition - 1983-09-01
Réf. no : IS0 7043-1983 (FI
- 5 CDU 621.882.31
Descripteurs : élément de fixation, écrou, écrou à embase, écrou hexagonal, spécification, désignation.
$
Prix basé sur 4 pages
8

---------------------- Page: 1 ----------------------
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale
d'organismes nationaux de normalisation (comités membres de I'ISO). L'élaboration
des Normes internationales est confiée aux comités techniques de WO. Chaque
comité membre intéressé par une étude a le droit de faire partie du comité technique
correspondant. Les organisations internationales, gouvernementales et non gouverne-
mentales, en liaison avec I'ISO, participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont soumis
aux comités membres pour approbation, avant leur acceptation comme Normes inter-
nationales par le Conseil de 1'1S0.
La Norme internationale IS0 7043 a été élaborée par le comité technique ISO/TC 2,
Eiéments de fixation, et a été soumise aux comités membres en décembre 1981.
Les comités membres des pays suivants l'ont approuvée :
Afrique du Sud, Rép. d'
Égypte, Rép. arabe d' Norvège
Allemagne, R.F. Espagne Nouvelle-Zélande
Australie Finlande Pays-Bas
Belgique France Pologne
Brésil Roumanie
Hongrie
Canada Inde Sri Lanka
Chine Irlande Suède
Corée, Rép. de Italie Suisse
Corée, Rép. dém. p. de Japon Tchécoslovaquie
Danemark Mexique USA
Les comités membres des pays suivants l'ont désapprouvée pour des raisons
techniques:
Royaume-Uni
URSS
0 Organisation internationale de normalisation, 1983 O
Imprimé en Suisse

---------------------- Page: 2 ----------------------
IS0 7043-1983 (F)
NORM E I NTE R NAT1 O NA LE
Écrous hexagonaux à em base cylindro-tronconique,
à freinage interne, à couple préalable (avec anneau non
métallique)
1 Objet et domaine d'application
La présente Norme internationale spécifie les caractéristiques des écrous hexagonaux à embase cylindro-tronconique, freinage
interne, à couple préalable (avec anneau non métallique), de diamètre nominal de filetage M 5 à M 20 inclus, et de grade A.
NOTE - Les dimensions des écrous sont conformes à celles données dans I'ISO 4161 plus le système de freinage.
Si d'autres spécifications sont requises, il est recommandé de les choisir dans les Normes internationales existantes, par exemple
IS0 261, IS0 898, IS0 965, IS0 2320, IS0 475911.
2 Références
IS0 225, héments de fixation - Boulons, vis, goujons et écrous - Symboles et désignations des dimensions.
IS0 261, Filetages métriques IS0 pour usages généraux - Vue d'ensemble.
IS0 898, Caractéristiques mécaniques des éléments de fixation.
IS0 965, filetages métriques IS0 pour usages généraux - Tolérances.
I SO 2320, Écrous hexagonaux en acier, à freinage interne, à couple préalable - Caractéristiques mécaniques et performances.
IS0 3269, Éléments de fixation - Contrôle de réception.1)
IS0 4042, Éléments filetés - Revêtements électrolytiques. 1)
IS0 4161, Écrous hexagonaux à embase cylindro-tronconique - Grade A.
IS0 47591 1, Tolérances pour éléments de fixation - Partie 1: Boulons, vis et écrous de diamètre de filetage
1,6 et < 150 mm et de
niveaux de finition A, B et C.
1) Actuellement au stade de projet.
1

--
...