Aluminium and aluminium alloys - Aluminium sheet, strip and plate for electrotechnical applications

This European Standard specifies the technical conditions of inspection and delivery, the mechanical properties, and electrical conductivity of wrought aluminium sheet, strip and plate for electrotechnical applications such as bus bars and other conductors, products requiring a certain minimum electrical conductivity.

Aluminium und Aluminiumlegierungen - Bänder, Bleche und Platten aus Aluminium für elektrotechnische Anwendungen

Aluminium et alliages d'aluminium - Tôles, bandes et tôles épaisses en aluminium pour applications électrotechniques

La présente Norme européenne spécifie les conditions techniques de contrôle et de livraison, les propriétés mécaniques et la conductivité électrique de tôles, bandes et tôles épaisses en aluminium corroyé pour applications électrotechniques telles que barres omnibus et autres conducteurs, produits exigeant une conductivité électrique minimale.
Elle s'applique aux produits d'épaisseur supérieure a 0,20 mm, jusqu'a 150 mm inclus.
NOTE   Certains des produits cités dans la présente norme peuvent faire l'objet d'un brevet ou d'une demande de brevet, et leur inclusion dans la présente norme ne doit etre en aucune façon considérée comme l'attribution d'une licence au regard des droit attachés a de tels brevets.
Le CEN/TC 132 confirme que dans le cas ou le détenteur d'un brevet refuserait de céder des licences sur les produits normalisés sous des conditions raisonnables et non discriminatoires, alors ce produit doit etre éliminé de la norme correspondante.

Aluminij in aluminijeve zlitine – Pločevina, trakovi in plošče za elektrotehniko

General Information

Status
Withdrawn
Publication Date
31-Dec-2003
Withdrawal Date
11-Jun-2009
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
10-Jun-2009
Due Date
03-Jul-2009
Completion Date
12-Jun-2009

Relations

Buy Standard

Standard
EN 14121:2004
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aluminium und Aluminiumlegierungen - Bänder, Bleche und Platten aus Aluminium für elektrotechnische AnwendungenAluminium et alliages d'aluminium - Tôles, bandes et tôles épaisses en aluminium pour applications électrotechniquesAluminium and aluminium alloys - Aluminium sheet, strip and plate for electrotechnical applications77.150.10Aluminijski izdelkiAluminium productsICS:Ta slovenski standard je istoveten z:EN 14121:2003SIST EN 14121:2004en01-januar-2004SIST EN 14121:2004SLOVENSKI
STANDARD



SIST EN 14121:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14121April 2003ICS 77.150.10English versionAluminium and aluminium alloys - Aluminium sheet, strip andplate for electrotechnical applicationsAluminium et alliages d'aluminium - Tôles, bandes et tôlesépaisses en aluminium pour applications électrotechniquesAluminium und Aluminiumlegierungen - Bänder, Blecheund Platten aus Aluminium für elektrotechnischeAnwendungenThis European Standard was approved by CEN on 2 January 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14121:2003 ESIST EN 14121:2004



EN 14121:2003 (E)2ContentsForeword.31Scope.42Normative references.43Terms and definitions.44Ordering information.45Requirements.55.1Production and manufacturing processes.55.2Quality control.55.3Chemical composition.55.4Mechanical properties and electrical conductivity.65.5Freedom from defects.65.6Tolerances on dimensions and form.65.7Other properties.66Test methods.76.1Chemical composition.76.2Tensile test.76.3Electrical conductivity.76.4Measurement of dimensions.76.5Surface finish.76.6Other tests.77Inspection documents.78Marking of products.89Packing.810Arbitration.8Bibliography.9SIST EN 14121:2004



EN 14121:2003 (E)3ForewordThis document (EN 14121:2003) has been prepared by Technical Committee CEN/TC 132, "Aluminium andaluminium alloys", the secretariat of which is held by AFNOR.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by October 2003, and conflicting national standards shall be withdrawn at the latestby October 2003.Within its programme of work, CEN/TC 132 has entrusted CEN/TC 132/WG 7 "Sheet, strip and plate" to preparethe following standard:EN 14121, Aluminium and aluminium alloys — Aluminium sheet, strip and plate for electrotechnical applications.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal,Slovakia, Spain, Sweden, Switzerland and the United Kingdom.SIST EN 14121:2004



EN 14121:2003 (E)41 ScopeThis European Standard specifies the technical conditions for inspection and delivery, the mechanical properties andelectrical conductivity of wrought aluminium sheet, strip and plate for electrotechnical applications such as bus barsand other conductors, products requiring a certain minimum electrical conductivity.It applies to products with a thickness over 0,20 mm up to and including 150 mm.NOTESome of the products listed in the present standard can be subject to patent or patent applications, and their listingherein does not in anyway imply the granting of a licence under such patent right.CEN/TC 132 affirms it’s policy that in the case when a patentee refuses to grant licenses on standardised standardproducts under reasonable and not discriminatory conditions, then this product shall be removed from thecorresponding standard.2 Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text, and the publications are listed hereafter.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.