Unbound and hydraulically bound mixtures - Part 40: Test method for the determination of the direct tensile strength of hydraulically bound mixtures

This standard specifies a method for the determination of the direct tensile strength of test specimens of hydraulically-bound mixtures. The standard applies to medium or coarse grained material specimens made from either laboratory or production mixes. It does not apply to fine grained materials.

Ungebundene und hydraulisch gebundene Gemische - Teil 40: Prüfverfahren zur Bestimmung der Zugfestigkeit hydraulisch gebundener Gemische im direkten Zugversuch

Diese Europäische Norm beschreibt ein Prüfverfahren zur Bestimmung der Zugfestigkeit von Probekörpern aus hydraulisch gebundenen Gemischen im direkten Zugversuch. Diese Europäische Norm gilt für Probekörper aus hydraulisch gebundenen Gemischen, die nach prEN 13286-52 hergestellt werden.

Mélanges traités et mélanges non traités aux liants hydraulique - Partie 40: Méthode d'essai de détermination de la résistance a la traction directe des mélanges traités aux liants hydrauliques

La présente norme Norme européenne européenne spécifie une méthode d'essai de détermination de la résistance a la traction directe d'éprouvettes de mélanges traités aux liants hydrauliques. La présente norme Norme européenne européenne s'applique aux éprouvettes de mélanges traités aux liants hydrauliques confectionnées conformément au au prEN 13286-52.

Nevezane in hidravlično vezane zmesi – 40. del: Preskusna metoda za ugotavljanje neposredne natezne trdnosti hidravlično vezanih zmesi

General Information

Status
Published
Publication Date
31-May-2004
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Jun-2004
Due Date
01-Jun-2004
Completion Date
01-Jun-2004

Buy Standard

Standard
EN 13286-40:2004
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Ungebundene und hydraulisch gebundene Gemische - Teil 40: Prüfverfahren zur Bestimmung der Zugfestigkeit hydraulisch gebundener Gemische im direkten ZugversuchMélanges traités et mélanges non traités aux liants hydraulique - Partie 40: Méthode d'essai de détermination de la résistance a la traction directe des mélanges traités aux liants hydrauliquesUnbound and hydraulically bound mixtures - Part 40: Test method for the determination of the direct tensile strength of hydraulically bound mixtures93.080.20Materiali za gradnjo cestRoad construction materialsICS:Ta slovenski standard je istoveten z:EN 13286-40:2003SIST EN 13286-40:2004en01-junij-2004SIST EN 13286-40:2004SLOVENSKI
STANDARD



SIST EN 13286-40:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13286-40March 2003ICS 93.080.20English versionUnbound and hydraulically bound mixtures - Part 40: Testmethod for the determination of the direct tensile strength ofhydraulically bound mixturesMélanges traités et mélanges non traités aux liantshydraulique - Partie 40: Méthode d'essai de déterminationde la résistance à la traction directe des mélanges traitésaux liants hydrauliquesUngebundene und hydraulisch gebundene Gemische - Teil40: Prüfverfahren zur Bestimmung der Zugfestigkeithydraulisch gebundener Gemische im direkten ZugversuchThis European Standard was approved by CEN on 29 November 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovak Republic, Spain, Sweden, Switzerland andUnited Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13286-40:2003 ESIST EN 13286-40:2004



EN 13286-40:2003 (E)2ContentspageForeword.31Scope.52Normative references.53Terms and definitions.54Principle.55Apparatus.65.1Direct tensile testing machine, capable of testing direct tensile specimens of hydraulicallybound mixtures.65.2Steel caps.65.3Ball joint.66Test specimen.67Test procedure.77.1Preparation of the test specimen.77.1.1Dimensions.77.1.2Mass.77.1.3Steel cap bonding.77.2Positioning the specimen and loading.77.3Data recording.78Expression of result.79Test report.8SIST EN 13286-40:2004



EN 13286-40:2003 (E)3ForewordThis document (EN 13286-40:2003) has been prepared by Technical Committee CEN/TC 227 "Road materials",the secretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by September 2003, and conflicting national standards shall be withdrawn at thelatest by December 2004.This European Standard is one of a series of standards as listed below.EN 13286-1, Unbound and hydraulically bound mixtures — Part 1: Test methods for laboratory reference densityand water content — Introduction, general requirements and sampling.prEN 13286-2, Unbound and hydraulically bound mixtures — Part 2: Test methods for laboratory reference densityand water content — Proctor compaction.EN 13286-3, Unbound and hydraulically bound mixtures — Part 3: Test methods for laboratory reference densityand water content — Vibrocompression with controlled parameters.EN 13286-4, Unbound and hydraulically bound mixtures — Part 4: Test methods for laboratory reference densityand water content — Vibrating hammer.EN 13286-5, Unbound and hydraulically bound mixtures — Part 5: Test methods for laboratory reference densityand water content — Vibrating table.prEN 13286-7, Unbound and hydraulically bound mixtures — Part 7: Cyclic load triaxial test for unbound mixtures.EN 13286-40, Unbound and hydraulically bound mixtures — Part 40: Test method for the determination of thedirect tensile strength of hydraulically bound mixtures.EN 13286-41, Unbound and hydraulically bound mixtures — Part 41: Test method for the determination of thecompressive of strength of hydraulically bound mixtures.EN 13286-42, Unbound and hydraulically bound mixtures — Part 42: Te
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.