oSIST prEN 2286:2024
(Main)Aerospace series - Bush, flanged aluminium alloy, with self-lubricating liner - Dimensions and loads
Aerospace series - Bush, flanged aluminium alloy, with self-lubricating liner - Dimensions and loads
This document specifies the characteristics of flanged bushes in aluminium alloy with self-lubricating liner and the design recommendation of shafts and housings.
The bushes are intended for use in assembly with an interference fit into fixed and moving aerospace parts.
Luft- und Raumfahrt - Buchse mit Flansch aus Aluminium-Legierung mit selbstschmierender Beschichtung - Maße und Belastungen
Série aérospatiale - Bague à épaulement, en alliage d’aluminium, à garniture autolubrifiante - Dimensions et charges
Le présent document spécifie les caractéristiques des bagues à épaulement en alliage d’aluminium, à garniture autolubrifiante, ainsi que la recommandation de conception des arbres et des logements.
Les bagues sont prévues pour être montées par ajustement avec serrage dans des pièces fixes ou mobiles destinées à l’aérospatiale.
Aeronavtika - Drsna puša s prirobnico iz aluminijeve zlitine s samomazalno oblogo - Mere in nosilnosti
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 2286:2024
01-maj-2024
Aeronavtika - Drsna puša s prirobnico iz aluminijeve zlitine s samomazalno oblogo
- Mere in nosilnosti
Aerospace series - Bush, flanged aluminium alloy, with self-lubricating liner - Dimensions
and loads
Luft- und Raumfahrt - Buchse mit Flansch aus Aluminium-Legierung mit
selbstschmierender Beschichtung - Maße und Belastungen
Série aérospatiale - Bague à épaulement, en alliage d’aluminium, à garniture
autolubrifiante - Dimensions et charges
Ta slovenski standard je istoveten z: prEN 2286
ICS:
49.025.20 Aluminij Aluminium
49.030.99 Drugi vezni elementi Other fasteners
oSIST prEN 2286:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 2286:2024
---------------------- Page: 2 ----------------------
oSIST prEN 2286:2024
DRAFT
EUROPEAN STANDARD
prEN 2286
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2023
ICS 49.030.99 Will supersede EN 2286:2017
English Version
Aerospace series - Bush, flanged aluminium alloy, with
self-lubricating liner - Dimensions and loads
Série aérospatiale - Bague à épaulement, en alliage Luft- und Raumfahrt - Buchse mit Flansch aus
d'aluminium, à garniture autolubrifiante - Dimensions Aluminium-Legierung mit selbstschmierender
et charges Beschichtung - Maße und Belastungen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 2286:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 2286:2024
prEN 2286:2023 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Required characteristics . 4
4.1 Configuration — Dimensions — Masses . 4
4.2 Surface roughness . 4
4.3 Materials and temperature range . 5
4.4 Surface treatment . 5
5 Designation . 10
6 Marking .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.