Aerospace series - Pipe coupling 8°30' in titanium alloy - Tees, reduced, bulkhead

This standard specifies the characteristics of tees, reduced, bulkhead, for pipe couplings 8°30', in titanium alloy, for
aerospace applications.
Nominal pressure: up to 28 000 kPa
Temperature range:   55 °C to 135 °C

Luft- und Raumfahrt - Rohrverschraubung 8°30' aus Titanlegierung - T-Verschraubungen, reduziert T-Durchgang als Schottanschluss

Diese Norm legt die Eigenschaften von T-Verschraubungen, reduziert, T-Durchgang als Schottanschluss, für
Rohrverschraubungen 8°30', aus Titanlegierung, zur Verwendung in der Luft- und Raumfahrt fest.
Nenndruck: bis 28 000 kPa
Temperaturbereich:   55 °C bis 135 °C

Série aérospatiale - Systeme de raccordement 8°30' en alliage de titane - Raccords en té, réduits pour traversée de cloison

La présente norme spécifie les caractéristiques des raccords en té pour traversée de cloison, réduits, pour les systemes
de raccordement 8°30', en alliage de titane, pour applications aérospatiales.
Pression nominale: jusqu'a 28 000 kPa
Plage de température:   55 °C a 135 °C

Aerospace series - Pipe coupling 8°30' in titanium alloy - Tees, reduced, bulkhead

General Information

Status
Published
Publication Date
30-Apr-2004
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-May-2004
Due Date
01-May-2004
Completion Date
01-May-2004

Buy Standard

Standard
EN 4194:2004
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Pipe coupling 8°30' in titanium alloy - Tees, reduced, bulkheadLuft- und Raumfahrt - Rohrverschraubung 8°30' aus Titanlegierung - T-Verschraubungen, reduziert T-Durchgang als SchottanschlussSérie aérospatiale - Systeme de raccordement 8°30' en alliage de titane - Raccords en té, réduits pour traversée de cloisonAerospace series - Pipe coupling 8°30' in titanium alloy - Tees, reduced, bulkhead49.080Aerospace fluid systems and componentsICS:Ta slovenski standard je istoveten z:EN 4194:2001SIST EN 4194:2004en01-maj-2004SIST EN 4194:2004SLOVENSKI
STANDARD



SIST EN 4194:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 4194October 2001ICS 49.080English versionAerospace series - Pipe coupling 8°30' in titanium alloy - Tees,reduced, bulkheadSérie aérospatiale - Système de raccordement 8°30' enalliage de titane - Raccords en té, réduits pour traversée decloisonLuft- und Raumfahrt - Rohrverschraubung 8°30' ausTitanlegierung - T-Verschraubungen, reduziert T-Durchgang als SchottanschlussThis European Standard was approved by CEN on 19 April 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 4194:2001 ESIST EN 4194:2004



EN 4194:2001 (E)ForewordThis European Standard has been prepared by the European Association of Aerospace Manufacturers (AECMA).After inquiries and votes carried out in accordance with the rules of this Association, this Standard has received theapproval of the National Associations and the Official Services of the member countries of AECMA, prior to its presentationto CEN.This European Standard shall be given the status of a national standard, either by publication of an identical text or byendorsement, at the latest by April 2002, and conflicting national standards shall be withdrawn at the latest by April 2002.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries arebound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany,Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the UnitedKingdom.2SIST EN 4194:2004



EN 4194:2001 (E)1
ScopeThis standard specifies the characteristics of tees, reduced, bulkhead, for pipe couplings 8°30', in titanium alloy, foraerospace applications.Nominal pressure: up to 28 000 kPaTemperature range:
55 °C to 135 °C2
Normative referencesThis European standard incorporates by dated or undated reference provisions from other publications. These normativereferences are cited at the appropriate places in the text and the publications are listed hereafter. For dated references,subsequent amendments to or revisions of any of these publications apply to this European Standard only whenincorporated in it by amendment or revision. For undated references, the latest edition of the publication referred to applies(including amendments).ISO 5855-3,
Aerospace series — MJ threads — Part 3: Limit dimensions for fittings for fluid systems.EN 2424,
Aerospace series — Marking of aerospace products.EN 2491,
Aerospace series — Molybdenum disulphide dry lubricants — Coating methods.EN 3267,
Aerospace series — Washers, bulkhead, in titanium alloy.EN 3274,
Aerospace series — Pipe coupling 8°30' — Thread ends — Geometric configuration.EN 3275,
Aerospace series — Pipe coupling 8°30' up
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.