SIST EN 13863-2:2004

Concrete pavements - Part 2: Test method for the determination of the bond between two layers

This European Standard specifies a method for the determination of the tensile bond strength between two concrete layers. This method is carried out on cores cut from hardened concrete.

Fahrbahnbefestigungen aus Beton - Teil 2: Prüfverfahren zur Bestimmung des Verbundes zwischen zwei Schichten

Diese Norm legt ein Verfahren zur Bestimmung der Zugfestigkeit des Verbundes zwischen zwei Betonschichten fest. Dieses Verfahren wird an Bohrkernen, die aus erhärtetem Beton entnommen wurden, durchgeführt.

Revetements en béton - Partie 2: Méthode d'essais pour la détermination du collage entre deux couches

Cette Norme européenne spécifie une méthode pour la détermination de la résistance en traction du collage entre deux couches de béton. Cette méthode est appliquée sur des carottes de béton durci.

Betonska vozišča – 2. del: Preskusna metoda za ugotavljanje spojitve dveh slojev

General Information

• Status: Published
• Publication Date: 31-May-2004
• ICS: 93.080.20 - Road construction materials
• Technical Committee: CES - Roads
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Jun-2004
• Due Date: 01-Jun-2004
• Completion Date: 01-Jun-2004
• Directive: 89/106/EEC - Construction products
• Ref Project: EN 13863-2:2003 - Concrete pavements - Part 2: Test method for the determination of the bond between two layers

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Fahrbahnbefestigungen aus Beton - Teil 2: Prüfverfahren zur Bestimmung des Verbundes zwischen zwei SchichtenRevetements en béton - Partie 2: Méthode d'essais pour la détermination du collage entre deux couchesConcrete pavements - Part 2: Test method for the determination of the bond between two layers93.080.20Materiali za gradnjo cestRoad construction materialsICS:Ta slovenski standard je istoveten z:EN 13863-2:2003SIST EN 13863-2:2004en01-junij-2004SIST EN 13863-2:2004SLOVENSKI
STANDARD



SIST EN 13863-2:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13863-2October 2003ICS 93.080.20English versionConcrete pavements - Part 2: Test method for the determinationof the bond between two layersRevêtements en béton - Méthodes d'essais - Partie 2:Détermination de la masse volumique d'une carotte à l'étatsaturéFahrbahnbefestigungen aus Beton - Teil 2: Prüfverfahrenzur Bestimmung des Verbundes zwischen zwei SchichtenThis European Standard was approved by CEN on 25 March 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13863-2:2003 ESIST EN 13863-2:2004



EN 13863-2:2003 (E)2ContentspageForeword.31Scope.32Normative references.33Principle.34Apparatus.45Sampling.46Preparation of specimens.47Procedure.58Test report.5SIST EN 13863-2:2004



EN 13863-2:2003 (E)3ForewordThis document (EN 13863-2:2003) has been prepared by Technical Committee CEN /TC 227 "Road materials", thesecretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by April 2004, and conflicting national standards shall be withdrawn at the latest byMarch 2005.This European Standard is one of a series of standards as listed below:EN 13863-1, Concrete pavements — Part 1 : Test method for the determination of the thickness of a concretepavement by survey method.EN 13863-2, Concrete pavements — Part 2 : Test method for the determination of the bond between two layers.prEN 13863-3, Concrete pavements —
Test methods for functional requirements - Part 3: Determination of thethickness of a concrete slab.prEN 13863-4, Concrete pavements —
Test methods - Part 4: Determination of wear resistance to studded tyres.According to the CE
...