SIST EN 3475-418:2019

Aerospace series - Cables, electrical, aircraft use - Test methods - Part 418: Thermal endurance for conductors

This European Standard specifies a test method to value the thermal endurance of bi-metal conductors,
by valuation of the influence of metallic migration on the electrical resistance per unit length.
It shall be used together with EN 3475-100.

Luft- und Raumfahrt - Elektrische Leitungen für Luftfahrtverwendung - Prüfverfahren - Teil 418: Thermische Gebrauchsdauer für Leiter

Série aérospatiale - Câbles électriques à usage aéronautique - Méthodes d'essais - Partie 418 : Endurance thermique des conducteurs

Aeronavtika - Električni kabli za uporabo v zračnih plovilih - Preskusne metode - 418. del: Toplotna vzdržljivost za vodnike

Ta evropski standard določa preskusno metodo za vrednotenje toplotne vzdržljivosti dvokovinskih vodnikov
z vrednotenjem vpliva kovinske migracije na električni upor pri dolžini enote.
Uporabljati ga je treba skupaj s standardom EN 3475-100.

General Information

• Status: Published
• Publication Date: 04-Jul-2019
• ICS: 29.060.20 - Cables
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 02-Jul-2019
• Due Date: 06-Sep-2019
• Completion Date: 05-Jul-2019
• Ref Project: EN 3475-418:2019 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 418: Thermal endurance for conductors

Relations

• Revised: SIST EN 3475-418:2009 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 418: Thermal endurance for conductors
• Effective Date: 12-Oct-2016
• Replaces: SIST EN 3475-418:2009 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 418: Thermal endurance for conductors
• Effective Date: 26-Jun-2019

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 3475-418:2019
01-september-2019
Nadomešča:
SIST EN 3475-418:2009
Aeronavtika - Električni kabli za uporabo v zračnih plovilih - Preskusne metode -
418. del: Toplotna vzdržljivost za vodnike
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 418: Thermal
endurance for conductors
Luft- und Raumfahrt - Elektrische Leitungen für Luftfahrtverwendung - Prüfverfahren -
Teil 418: Thermische Gebrauchsdauer für Leiter
Série aérospatiale - Câbles électriques à usage aéronautique - Méthodes d'essais -
Partie 418 : Endurance thermique des conducteurs
Ta slovenski standard je istoveten z: EN 3475-418:2019
ICS:
29.060.20 Kabli Cables
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
SIST EN 3475-418:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 3475-418:2019

---------------------- Page: 2 ----------------------

SIST EN 3475-418:2019


EN 3475-418
EUROPEAN STANDARD

NORME EUROPÉENNE

June 2019
EUROPÄISCHE NORM
ICS 49.060
English Version

Aerospace series - Cables, electrical, aircraft use - Test
methods - Part 418: Thermal endurance for conductors
Série aérospatiale - Câbles électriques à usage Luft- und Raumfahrt - Elektrische Leitungen für
aéronautique - Méthodes d'essais - Partie 418 : Luftfahrtverwendung - Prüfverfahren - Teil 418:
Endurance thermique des conducteurs Thermische Gebrauchsdauer für Leiter
This European Standard was approved by CEN on 6 January 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3475-418:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 3475-418:2019
EN 3475-418:2019 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Introduction . 4
5 Preparation of specimens . 5
6 Apparatus. 6
7 Method . 6
8 Requirements . 6
Annex A (normative) Standard evolution form . 7

2

---------------------- Page: 4 ----------------------

SIST EN 3475-418:2019
EN 3475-418:2019 (E)
European foreword
This document (EN 3475-418:2019) has been prepared by the Aerospace and Defence Industries
Association of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2019, and conflicting national standards shall
be withdrawn at the latest by December 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 3475-418:2007.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia,
Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
3

---------------------- Page: 5 ----------------------

SIST EN 3475-418:2019
EN 3475-418:2019 (E)
1 Scope
This European Standard specifies a test method to value the thermal endurance of bi-metal conductors,
by valuation of the influence of metallic migration on the electrical resistance per unit length.
It shall be used together with EN 3475-
...