SIST EN 14197-2:2004/AC:2007
(Amendment)Cryogenic vessels - Static non-vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing
Cryogenic vessels - Static non-vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing
TC - Replace Figures
Kryo-Behälter - Ortsfeste, nicht vakuum-isolierte Behälter - Teil 2: Bemessung, Herstellung und Prüfung
Récipients cryogéniques - Récipients fixes, non isolés sous vide - Partie 2: Conception, fabrication, inspection et essais
Kriogene posode – Stabilne, vakuumsko neizolirane posode – 2. del: Konstruiranje, izdelava, kontrola in preskus
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Cryogenic vessels - Static non-vacuum insulated vessels - Part 2: Design, fabrication, inspection and testingKriogene posode – Stabilne, vakuumsko neizolirane posode – 2. del: Konstruiranje, izdelava, kontrola in preskusRécipients cryogéniques - Récipients fixes, non isolés sous vide - Partie 2: Conception, fabrication, inspection et essaisKryo-Behälter - Ortsfeste, nicht vakuum-isolierte Behälter - Teil 2: Bemessung, Herstellung und PrüfungTa slovenski standard je istoveten z:EN 14197-2:2003/AC:2006SIST EN 14197-2:2004/AC:2007en,fr,de23.020.40Proti mrazu odporne posode (kriogenske posode)Cryogenic vesselsICS:SLOVENSKI
STANDARDSIST EN 14197-2:2004/AC:200701-januar-2007
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14197-2:2003/ACAugust 2006Août 2006August 2006ICS 23.020.40English versionVersion FrançaiseDeutsche FassungCryogenic vessels - Static non-vacuum insulated vessels - Part 2: Design,fabrication, inspection and testingRécipients cryogéniques - Récipients fixes,non isolés sous vide - Partie 2: Conception,fabrication, inspection et essaisKryo-Behälter - Ortsfeste, nicht vakuum-isolierte Behälter - Teil 2: Bemessung,Herstellung und PrüfungThis corrigendum becomes effective on 23 August 2006 for incorporation in the three officiallanguage versions of the EN.Ce corrigendum prendra effet le 23 août 2006 pour incorporation dans les trois versions linguistiquesofficielles de la EN.Die Berichtigung tritt am 23.August 2006 zur Einarbeitung in die drei offiziellen Sprachfassungen derEN in Kraft.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members.Tous droits d'exploitation sous quelque forme et de quelque manière que ce soit réservés dans le monde entier auxmembres nationaux du CEN.Alle Rechte der Verwertung, gleich in welcher Form und in welchem Verfahren, sind weltweit den nationalen Mitgliedernvon CEN vorbehalten.Ref. No.:EN 14197-2:2003/AC:2006 D/E/F
EN 14197-2:2003/AC:2006 (E/F/D) 2 English version Replace the following figures:
Figure 4b)
Figure 5
EN 14197-2:2003/AC:2006 (E/F/D) 3
Figure 11 Figure 12c) : modify to read
“flat plate welded into the shell from one side only”
Design factor C : for s ≤ 3 s1
= 0, 45 ; for sf3 s1
= 0, 50 Figure 12e) : modify to read
“flat plate welded into the shell from both sides”
Design factor C : for s ≤ 3 s1
= 0, 35 ; for sf3 s1
= 0, 40
Replace Figure 13 and modify the key as follows:
EN 14197-2:2003/AC:2006 (E/F/D) 4
Key 1 Rectangle 2 Ellipse Y Design factor CE X Ratio f/e
Rectangular plates Elliptical plates f = short side of the rectangular plate f = short side of the elliptical plate e = long side of the rectangular plate e = long side of the elliptical plate ≤<≤<=∑=−10056210110411,ef,,ef,efACiiie ≤<≤<=∑∑=−=−611611800800iiiiiiiiA,fdfdA,DdDdAC 7621108508017933509034923900460589114321,A,A,A,A=−=−== 7621108508017933509034923900014648914321,A,A,A,A=−=−== Figure 13 — Design factor CE for rectangular or elliptical flat plates
EN 14197-2:2003/AC:2006 (E/F/D) 5
Figure 15
Figure 17
Figure 22
EN 14197-2:2003/AC:2006 (E/F/D) 6
Figure 26
Figure C.2
EN 14197-2:2003/AC:2006 (E/F/D) 7 Replace Table C.2 with the following: Table C.2 – Modification of formulae for the design of pressure strengthened vessels Sub-clause of this standard Modification, see sub-clause in this annex 4.3.5.1 Cylinders and spheres subject to internal pressure C.5.2.3.3 4.3.5.4 Dished ends subject to internal or external pressure 4.3.5.4.4 Internal pressure calculation (pressure on the concave surface) C.5.2.3.4 4.3.5.3 Cones subject to internal or external pressure 4.3.5.5.6 internal pressure calculation (pressure on the concave surface) |ϕ| ≤ 70° 4.3.5.5.7 Internal pressure calculation (pressure on the concave surface) |ϕ| > 70°
C. 5.2.3.4
C.5.2.3.2 4.3.5.4 Flat ends C. 5.2.3.2 4.3.5.5 Openings in cylinders, spheres and cones C.5.2.3.5
C.7.3.1, fourth paragraph; replace "(C.1) by "(C.8)"
Figure E.1
EN 14197-2:2003/AC:2006 (E/F/D) 8 Version française Remplacer l
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.