iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST-TS CEN/TS 13126-10:2005

(Main)

Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 10: Arm balancing systems

Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 10: Arm balancing systems

This part of prCEN/TS 13126 specifies the requirements and test methods for arm balancing systems for windows and door height windows.

Baudeschläge - Beschläge für Fenster und Fenstertüren - Anforderungen und Prüfverfahren - Teil 10: Senkklappflügel-Systeme

Dieser Teil von prCEN/TS 13126 legt die Anforderungen an und die Prüfverfahren für Senkklappflügel-Systeme für Fenster und Fenstertüren fest.

Quincaillerie pour le bâtiment , ferrures de fenetres et portes-fenetres - Exigences et méthodes d'essai - Partie 10 : Compas a projection

La présente partie du prCEN/TS 13126 spécifie les exigences et méthodes d'essai a respecter pour les compas a projection utilisés sur les fenetres et portes-fenetres.

Stavbno okovje, pritrjevalni sistemi za okna in zastekljena vrata – Zahteve in preskusne metode – 10. del: Sistemi za ročno upravljanje

General Information

Status
Withdrawn
Publication Date
31-Dec-2004
Withdrawal Date
17-Feb-2009
ICS
91.190 - Building accessories
Technical Committee
ISTP - Doors and windows
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
09-Jan-2009
Due Date
01-Feb-2009
Completion Date
18-Feb-2009
Directive
89/106/EEC - Construction products
Ref Project
CEN/TS 13126-10:2004 - Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 10: Arm balancing systems

Relations

Replaced By
SIST EN 13126-10:2009 - Building hardware - Requirements and test methods for windows and doors height windows - Part 10: Arm-balancing systems
Effective Date
01-Mar-2009

Buy Standard

TS CEN/TS 13126-10:2005TS CEN/TS 13126-10:2005
PreviousNext
Technical specification
TS CEN/TS 13126-10:2005
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 13126-3:2023(Main)
Building hardware - Hardware for windows and door-height windows - Requirements and test methods - Part 3: Handles, primarily for Tilt and Turn, Tilt-First and Turn-Only hardware
EN 13126-3:2023

This part of EN 13126 specifies the requirements and test procedures for durability, strength, security and functionality of handles.
This European Standard is applicable to Tilt and Turn, Tilt-First and Turn-Only hardware for use on windows and door-height windows.
Handles may also be used on other opening types, e.g. on In-line Sliding, Tilt and Slide, Sliding Folding, horizontal and vertical-pivoting windows.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17610:2022(Main)
Building hardware - Environmental product declarations - Product category rules complementary to EN 15804 for building hardware
EN 17610:2022

This document provides product category rules (PCR) for Type III environmental declarations for:
Building hardware products for opening and closing doors, gates, windows and shutters:
-   Door and window handles (EN 1906)
-   Hinges (EN 1935)
-   Window fittings (EN 13126)
-   Shutter hardware devices (e.g. EN 14648)
-   Door closers (incl. door coordinators) and hold open devices (EN 1154 + A1, EN 1155, EN 1158 + A1)
-   Sliding door gear (EN 1527, EN 15706)
-   Glass door gear
Building hardware products for locking and unlocking doors, gates, windows and shutters:
-   Locks (EN 12209, EN 15685)
-   Locking cylinders (EN 1303)
-   Padlocks (EN 12320)
-   Push button locks (BS 8607)
-   Exit devices (EN 179, EN 1125)
Electromechanical building hardware products:
-   Mechatronic cylinders (EN 15684)
-   Mechatronic padlocks (EN 16864)
-   Mechatronic door furniture (EN 16867)
-   Electromechanically operated locks and striking plates (EN 14846)
-   Electrically controlled exit systems for use on escape routes (EN 13637)
This document complements the core rules for the product category of construction products as defined in the European standard EN 15804:2012+A1:2013+A2:2019. The document is to be used in conjunction with EN 15804:2012+A1:2013+A2:2019.
NOTE   The assessment of social and economic performances at product level is not covered by this document.
The core PCR:
-   defines the parameters to be declared and the way in which they are collated and reported;
-   describes which stages of a product’s life cycle are considered in the EPD and which processes are to be included in the life cycle stages;
-   defines rules for the development of scenarios;
-   includes the rules for calculating the Life Cycle Inventory and the Life Cycle Impact Assessment underlying the EPD, including the specification of the data quality to be applied;
-   includes the rules for reporting the predetermined, environmental and health information that is not covered by Life Cycle Assessment (LCA) for the product, construction process(es) and construction service(s), as relevant;
-   defines the conditions under which construction products can be compared based on the information provided by EPD.
For the EPD of construction services the same rules and requirements apply as for the EPD of construction products.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    77 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13126-16:2019/AC:2022(Corrigendum)
Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 16: Hardware for Lift and Slide windows
EN 13126-16:2019/AC:2022

This part of EN 13126 specifies requirements and test methods for durability, strength, security and function of hardware for Lift and Slide windows and door height windows in accordance with common application as shown in informative Annex C, regardless of whether the hardware enables an additional tilt position.
NOTE 1   This document is also applicable to hardware systems, whereby the sash itself is not lifted but a gasket mechanism is moved.
NOTE 2   This document is also applicable to hardware systems, whereby the sash itself is not lifted but the sash is being moved parallel to the plane of the frame.

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 17814:2022(Main)
Building hardware - Master Key System data protection - Guidance
CEN/TS 17814:2022

This document specifies requirements and procedures to achieve and maintain protection of data and
sensitive information related to mechanical Master Key Systems and other mechanical key systems
where customer or application related data are being processed throughout the process of planning,
production, installation, and maintenance.
The requirements and test methods for mechanical cylinder locks is covered by EN 1303.
Reference is made to EN 1303 and Annexes relating to Master Key Systems (MKS).
Requirements relating to the information security of key based and non-key based electronic cylinders
are not covered.

  • Technical specification
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13126-4:2022(Main)
Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 4: Espagnolettes
EN 13126-4:2022

This part of prEN 13126 specifies requirements and test methods for durability, strength, security and function of espagnolettes and their striker plates for use on windows and door height windows.
NOTE   Espagnolettes are defined as a locking mechanism for windows and door height windows that usually have a maximum handle movement of 90°.
This document does not include door bolts within the scope of EN 12051, or locks with latch and/or dead bolt within the scope of EN 12209 or multi-point locks within the scope of prEN 15885.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13126-1:2022(Main)
Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 1: Requirements common to all types of hardware
EN 13126-1:2022

This document specifies performance requirements for the strength and durability of hardware for the operation of movable sashes of windows and door height windows including requirements and test methods common to all hardware.
This document is applicable to the hardware suitable for windows and door height windows in Table 1, whatever the material used for the construction of the window.
This document does not apply to the following:
-   fusible links,
-   hardware for lifting side-hung windows,
-   fixing devices that are used to assemble or install a fixed window,
-   devices that are used for the permanent fixing of a complete window into a building structure,
-   mechanisms for the pneumatic or hydraulic remote operation of windows,
-   single axis hinges (other than those, which provide a pivot-function for windows),
-   single axis hinges as covered in EN 1935,
-   hardware for sliding doors and folding doors as covered in EN 1527
-   door and window bolts as covered in EN 12051.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13126-14:2022(Main)
Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 14: Sash fasteners
EN 13126-14:2022

This document specifies requirements and test methods for durability, strength, security and function of sash fasteners for windows and door height windows.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13126-13:2022(Main)
Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 13: Sash balances
EN 13126-13:2022

This document specifies requirements and test methods for durability, strength, security and function of sash balances.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12320:2022(Main)
Building hardware - Padlocks and padlock fittings - Requirements and test methods
EN 12320:2021

This document applies to mechanical padlocks and padlock fittings used on buildings and general use, and specifies the test methods to be used.
This document specifies performance and other requirements for strength, security, durability, performance, and corrosion resistance of padlocks. It establishes one category of use, two categories of durability, six categories for corrosion resistance and six grades for security based on performance tests that simulate attack.
Limited manual attack testing is included in this document because the machine testing does not replicate all known manual attacks.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1527:2019+A1:2022(Main)
Building hardware - Hardware for sliding doors and folding doors - Requirements and test methods
EN 1527:2019+A1:2021

This document specifies requirements for the design manual system sliding doors, sliding corner doors and folding doors of the bi-fold type and multi-panel folding doors but excluding doors and panels. Cycle tests, static load, initial friction and corrosion resistance tests are included for fittings and track only.
This document covers door gear for all industrial, commercial and residential sliding doors and folding doors.
This document does not cover the rollers for horizontal sliding and building hardware for inward or outward sliding folding windows (types N Q, R and S) in accordance with EN 13126-15, building hardware for Lift and Slide windows (type P) in accordance with EN 13126-16 and building hardware for Tilt and Slide windows (type T) in accordance with EN 13126-17.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day