SIST EN 16361:2013+A1:2016/oprA2:2017

Power operated pedestrian doors - Product standard, performance characteristics - Pedestrian doorsets, other than swing type, initially designed for installation with power operation

This European Standard specifies requirements and test/assessment/calculation methods for external and internal power operated pedestrian doorsets, other than swing type, initially designed for installation with power operation.
Such doorset constructions may be operated electro-mechanically, electro-hydraulically or pneumatically.
These doorsets include power operated pedestrian sliding doorsets, revolving doorsets, balanced (sliding/swing) doorsets and folding doorsets with one or more horizontally moving leaves.
This European Standard applies to power operated pedestrian doorsets with flush or panelled leaves, complete with:
-   integral fanlights, if any;
NOTE 1   A fanlight is a panel over a door which is part of the doorset.
-   side panels that are contained within a single frame for inclusion in a single aperture, if any.
The intended uses of the products covered by this European Standard are:
-   doorsets for external use in escape routes and other declared specific uses and/or uses subject to other specific requirements, in particular noise, energy, tightness and safety-in-use in construction works;
-   doorsets for internal use in escape routes, communication and other declared specific uses and/or uses subject to other specific requirements, in particular noise and safety-in-use in construction works;
-   doorsets for internal use in escape routes, communication and other declared specific uses and/or uses subject to other specific requirements, in particular noise, energy and safety-in-use in construction works.
The products covered by this European Standard are not assessed for structural applications of the building.
This European Standard does not cover operation in environments where the electromagnetic disturbances are outside the range of those specified in EN 61000-6-2.
This European Standard does not apply to:
-   external pedestrian doorsets according to EN 14351-1;
-   internal pedestrian doorsets according to prEN 14351-2;
-   fire resistance and/or smoke control characteristics according to EN 16034;
-   lifts doorsets;
-   vehicles doorsets;
-   doorsets used in industrial processes;
-   doorsets in partition walls;
-   doorsets outside the reach of people (such as crane gantry fences);
-   turnstiles;
-   platform doorsets.
This European Standard does not cover special functions of doorsets (e.g. security, fire aspects in banks, airports, etc.).
This European Standard does not deal with any specific requirements on noise emitted from power operated doorsets, other than swing type, initially designed for installation with power operation as their noise emission is not considered to be a relevant hazard.
NOTE 2   Noise emission of power operated doorsets, other than swing type, initially designed for installation with power operation is not a significant hazard for the users of these products. It is a comfort aspect.

Kraftbetätigte Türen - Produktnorm, Leistungseigenschaften - Türsysteme, mit Ausnahme von Drehflügeltüren, vorgesehen für den kraftbetätigten Betrieb

Portes motorisées pour piétons - Norme produit, caractéristiques de performance - Blocs-portes pour piétons, autres que de type battant, initialement conçus pour une installation avec un système de motorisation

Avtomatska vrata za prehod ljudi - Standard za proizvod, zahtevane lastnosti - Sestavi vrat za prehod ljudi, razen nihajnih vrat, najprej zasnovani za montažo s pogonom

General Information

• Status: Not Published
• Public Enquiry End Date: 14-Sep-2017
• ICS: 91.060.50 - Doors and windows
• Technical Committee: ISTP - Doors and windows
• Current Stage: 98 - Abandoned project (Adopted Project)
• Start Date: 22-Apr-2024
• Due Date: 27-Apr-2024
• Completion Date: 22-Apr-2024
• Directive: 2014/30/EU - Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility (recast)
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Mandate: M/101 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on doors, windows and related products
• Mandate: M/552 - [C(2016) 7641 final] Standardisation request as regards harmonised standards in support of Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility
• Ref Project: EN 16361:2013+A1:2016/prA2:2017 - Power operated pedestrian doors - Product standard, performance characteristics - Pedestrian doorsets, other than swing type, initially designed for installation with power operation

Relations

• Amends: SIST EN 16361:2013+A1:2016 - Power operated pedestrian doors - Product standard, performance characteristics - Pedestrian doorsets, other than swing type, initially designed for installation with power operation
• Effective Date: 01-Sep-2017

Overview

SIST EN 16361:2013+A1:2016/oprA2:2017 is a comprehensive European product standard developed by CEN that specifies the performance characteristics and testing methods for power operated pedestrian doorsets that are not of the swing type. These doorsets are initially designed for power operation and include types such as sliding, revolving, balanced sliding/swing, and folding doors with one or more horizontally moving leaves. The standard applies to both internal and external pedestrian doorsets, covering product design, safety, performance, and electromagnetic compatibility.

The standard addresses doorsets operated by electro-mechanical, electro-hydraulic, or pneumatic systems and applies to doorsets with flush or panelled leaves, integral fanlights, and side panels contained within a single frame for installation in a single aperture.

Key Topics

• Scope and Application: EN 16361 pertains to power operated pedestrian doorsets excluding swing doors. It covers structures primarily installed for pedestrian use both indoors and outdoors, especially in escape routes, communication areas, and other specified uses.

• Performance Requirements: The standard defines performance characteristics including operation safety, energy efficiency, and usability in construction works. It excludes structural applications of the building and special functions such as fire resistance or smoke control which are covered by EN 16034.

• Types of Doors Covered: Sliding doorsets, revolving doorsets, balanced sliding/swing doorsets, and folding doorsets with horizontally moving leaves. Doors may include integral fanlights and side panels.

• Exclusions: The standard does not apply to pedestrian doorsets covered by EN 14351-1 and prEN 14351-2, doorsets for lifts or vehicles, industrial process doorsets, partition wall doorsets, turnstiles, platform doorsets, or doorsets located outside pedestrian reach. Noise emission is not considered a significant hazard except for swing-type doors.

• Electromagnetic Compatibility: Compliance with Directive 2014/30/EU (EMC Directive) is supported, ensuring that power operated doorsets meet electromagnetic disturbance requirements within defined limits in EN 61000-6-2.

Applications

• Commercial and Public Buildings: Suitable for entryways and internal access points where automated door operation is essential for accessibility and traffic flow, such as shopping centers, airports, hospitals, and office buildings.

• Emergency and Escape Routes: Designed for external and internal doorsets in escape routes, complying with safety regulations without compromising reliability during emergencies.

• Energy and Environmental Performance: Applicable for buildings focusing on energy efficiency and noise reduction where power operated doors are installed.

• Adaptation to Various Power Systems: Ideal for doorsets that use various power mechanisms - electro-mechanical, electro-hydraulic, or pneumatic - offering versatility in installation and operation.

• Accessibility Solutions: Enables automated access for pedestrians including persons with reduced mobility, improving convenience and compliance with accessibility standards.

Related Standards

• EN 14351-1: Covers external pedestrian doorsets, including swing types not addressed by EN 16361.

• prEN 14351-2: Focuses on internal pedestrian doorsets including swing-type products.

• EN 16034: Addresses fire resistance and smoke control for pedestrian doorsets, not covered by EN 16361.

• EN 61000-6-2: Specifies immunity requirements for electromagnetic disturbances relevant for power operated door operation.

• Directive 2014/30/EU (EMC Directive): Governs electromagnetic compatibility requirements that EN 16361 supports, ensuring power operated pedestrian doorsets operate reliably in specified environments.

---

Keywords: power operated pedestrian doors, performance characteristics, non-swing doorsets, sliding doors, revolving doors, balanced doors, folding doors, electro-mechanical doors, electro-hydraulic doors, pneumatic doors, EN 16361, CEN standard, pedestrian doorsets, building access, escape route doors, electromagnetic compatibility, energy efficient doors, automated doors.

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2017
Avtomatska vrata za prehod ljudi - Standard za proizvod, zahtevane lastnosti -
Sestavi vrat za prehod ljudi, razen nihajnih vrat, najprej zasnovani za montažo s
pogonom
Power operated pedestrian doors - Product standard, performance characteristics -
Pedestrian doorsets, other than swing type, initially designed for installation with power
operation
Kraftbetätigte Türen - Produktnorm, Leistungseigenschaften - Türsysteme, mit
Ausnahme von Drehflügeltüren, vorgesehen für den kraftbetätigten Betrieb
Portes motorisées pour piétons - Norme produit, caractéristiques de performance - Blocs
-portes pour piétons, autres que de type battant, initialement conçus pour une installation
avec un système de motorisation
Ta slovenski standard je istoveten z: EN 16361:2013+A1:2016/prA2:2017
ICS:
91.060.50 Vrata in okna Doors and windows
SIST EN en,fr,de
16361:2013+A1:2016/oprA2:2017
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
EN 16361:2013+A1:2016
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA2
July 2017
ICS 91.060.50
English Version
Power operated pedestrian doors - Product standard,
performance characteristics - Pedestrian doorsets, other
than swing type, initially designed for installation with
power operation
Portes motorisées pour piétons - Norme de produit, Kraftbetätigte Türen - Produktnorm,
caractéristiques de performance - Blocs-portes pour Leistungseigenschaften - Türsysteme, mit Ausnahme
piétons, autres que de type battant, initialement conçus von Drehflügeltüren, vorgesehen für den
pour une installation avec un système de motorisation kraftbetätigten Betrieb
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 33.

This draft amendment A2, if approved, will modify the European Standard EN 16361:2013+A1:2016. If this draft becomes an
amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
inclusion of this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN
worldwide for CEN national Members. 16361:2013+A1:2016/prA2:2017:2017 E

Contents Page
European foreword . 3
1 Modification to 5.11, Radiation properties. 4
2 Modification to Annex B, Summary of the characteristics .
...