SIST EN 2084:2006
(Main)Aerospace series - Cables, electric, single-core, general purpose, with conductors in copper or copper alloy - Technical specification
Aerospace series - Cables, electric, single-core, general purpose, with conductors in copper or copper alloy - Technical specification
This standard specifies the characteristics, test methods, qualification and acceptance conditions of single-core electric cables for general purpose with conductors in copper or copper alloy, intended for installation in aircraft circuits.
The insulation of these cables is designed to withstand a maximum service voltage of 600 V r.m.s. at a frequency not exceeding 2 000 Hz.
They are divided into types, the characteristics of which are given in the product standards. Unless otherwise specified in the product standard, the tests defined in this standard apply.
Luft- und Raumfahrt - Elektrische Leitungen, einadrig, für allgemeine Verwendung, mit Leitern aus Kupfer oder Kupferlegierung - Technische Lieferbedingungen
Diese Norm legt die Eigenschaften, Prüfverfahren, Qualifikations- und Annahmebedingungen für einadrige elektrische Leitungen für allgemeine Verwendung, mit Leitern aus Kupfer oder Kupferlegierung, die zum Einbau in Bordnetze von Luftfahrzeugen bestimmt sind, fest.
Die Isolierung dieser Leitungen ist für eine maximale Betriebsspannung von 600 V Effektivwert bei einer Frequenz bis 2 000 Hz ausgelegt.
Sie sind in Typen aufgeteilt, deren Eigenschaften in den Produktnormen angegeben sind. Falls in der Produktnorm nicht anders festgelegt, gelten die Prüfungen nach dieser Norm.
Série aérospatiale - Câbles électriques, monoconducteurs, d'usage général, avec conducteurs en cuivre ou en alliage de cuivre - Spécification technique
Aeronavtika – Električni kabli enožilni, za splošne namene, z vodniki iz bakra ali bakrene zlitine – Tehnična specifikacija
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 2084:2006
01-julij-2006
$HURQDYWLND±(OHNWULþQLNDEOLHQRåLOQL]DVSORãQHQDPHQH]YRGQLNLL]EDNUDDOL
EDNUHQH]OLWLQH±7HKQLþQDVSHFLILNDFLMD
Aerospace series - Cables, electric, single-core, general purpose, with conductors in
copper or copper alloy - Technical specification
Luft- und Raumfahrt - Elektrische Leitungen, einadrig, für allgemeine Verwendung, mit
Leitern aus Kupfer oder Kupferlegierung - Technische Lieferbedingungen
Série aérospatiale - Câbles électriques, monoconducteurs, d'usage général, avec
conducteurs en cuivre ou en alliage de cuivre - Spécification technique
Ta slovenski standard je istoveten z: EN 2084:2005
ICS:
49.060
SIST EN 2084:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
EN 2084
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2005
ICS 49.060
English Version
Aerospace series - Cables, electric, single-core, general
purpose, with conductors in copper or copper alloy - Technical
specification
Série aérospatiale - Câbles électriques, monoconducteurs, Luft- und Raumfahrt - Elektrische Leitungen, einadrig, für
d'usage général, avec conducteurs en cuivre ou en alliage allgemeine Verwendung, mit Leitern aus Kupfer oder
de cuivre - Spécification technique Kupferlegierung - Technische Lieferbedingungen
This European Standard was approved by CEN on 19 September 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2084:2005: E
worldwide for CEN national Members.
---------------------- Page: 2 ----------------------
EN 2084:2005 (E)
Contents Page
Foreword .3
1 Scope.4
2 Normative references.4
3 Terms, definitions and symbols .4
4 Materials and construction of cables .4
5 Required characteristics.5
6 Tests methods.5
7 Quality assurance.8
8 Identification marking.10
9 Packaging, labelling and delivery lengths .10
2
---------------------- Page: 3 ----------------------
EN 2084:2005 (E)
Foreword
This European Standard (EN 2084:2005) has been prepared by the European Association of Aerospace
Manufacturers - Standardization (AECMA-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
AECMA, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by May 2006, and conflicting national standards shall be withdrawn at the
latest by May 2006.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland
and the United Kingdom.
3
---------------------- Page: 4 ----------------------
EN 2084:2005 (E)
1 Scope
This standard specifies the characteristics, test methods, qualification and acceptance conditions of single-
core electric cables for general purpose with conductors in copper or copper alloy, intended for installation in
aircraft circuits.
The insulation of these cables is designed to withstand a maximum service voltage of 600 V r.m.s. at a frequency
not exceeding 2 000 Hz.
They are divided into types, the characteristics of which are given in the product standards. Unless otherwise
specified in the product standard, the tests defined in this standard apply.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 2574, Aircraft — Electrical cables — Identification marking.
EN 2083, Aerospace series — Copper or copper alloy conductors for electrical cables — Product standard.
EN 3475-100*, Aerospace series — Cables, electrical, aircraft use — Test methods — Part 100: General.
1)
EN 3838, Aerospace series — Requirements and tests on user-applied markings on aircraft electrical cables.
EN 9133, Aerospace series — Quality management systems — Qualification Procedure for Aerospace
1)
Standard Part.
3 Terms, definitions and symbols
For the purposes of this standard, the terms, definitions and symbols given in EN 3475-100 apply.
4 Materials and construction of cables
4.1 Conductors
They shall conform to EN 2083 unless otherwise specified.
4.2 Finished cables
The insulation material shall present a uniform circular cross-section throughout the length of the cable.
Covering over the insulation shall be treated and applied in such a manner that the cables present a smooth
appearance and are able to accept marking.
All materials used shall have no corrosive effect upon the conductors and shall not be susceptible to attack by
mould or other micro-organisms.
* All parts quoted in Table 1.
1) Published as AECMA Prestandard at the date of publication of this standard.
4
---------------------- Page: 5 ----------------------
EN 2084:2005 (E)
5 Required characteristics
The characteristics of the cables, tested according to the methods described hereafter shall comply with the
values given in the product standard.
6 Tests methods
See Table 1.
Table 1 — Tests: methods, application, requirements
Tests
Each delivery
EN 3475-
§ Requirements
and
No. (and/or particulars)
Description
additional details,
if any
6 Test conditions 100 X X X X
6.1 Visual 201 3 X Marking: according § 8
examination
6.2 Mass 202 3 X Minimum length: 0,5 m
6.3 Dimensions (all) 203 3 X Conductor: EN 2083 unless
otherwise specified
X Product standard
− outer diameter
6.4 Ohmic resistance 301 3 X Product standard
per unit length
6.5 Voltage proof test: 302
immersion test 3 2,5 kV r.m.s.
dry test X 5 kV r.m.s.
or dry impulse test X 8 kV peak voltage
(Alternative to dry
test)
6.6 Insulation 303 3 For a length of 1 km:
resistance X 1 500 M minimum
at 20 ± 2 °C X 15 M minimum
at 95 ± 2 °C
6.7 Surface 304 3 Minimum:
resistance 1 250
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.