SIST EN 3475-505:2012

Aerospace series - Cables, electrical, aircraft use - Test methods - Part 505: Tensile test on conductors and strands

This European Standard specifies a method of measuring the tensile properties of strands, conductors and braids. When required, it can be used also on cables. It should be used together with EN 3475-100.

Luft- und Raumfahrt - Elektrische Leitungen für Luftfahrtverwendung - Prüfverfahren - Teil 505: Zugfestigkeit der Einzeldrähte und Leiterseile

Diese Norm legt ein Verfahren zur Bestimmung der Zugeigenschaften von Einzeldrähten, Leitern und Schirm-geflechten fest.
Sie kann auch, falls erforderlich, bei Kabeln angewendet werden.
Die Norm ist in Verbindung mit EN 3475 100 anzuwenden.

Série aérospatiale - Câbles électriques à usage aéronautique - Méthodes d’essais - Partie 505: Résistance à la traction des conducteurs et des brins

La présente Norme Européenne spécifie une méthode pour mesurer la tenue en traction des brins, des torons
et des tresses.
Quand exigé, elle peut être utilisée aussi sur les câbles.
Elle doit être utilisée conjointement avec l’EN 3475-100.

Aeronavtika - Električni kabli za uporabo v zračnih plovilih - Preskusne metode - 505. del: Natezni preskus vodnikov in žic

Ta evropski standard določa metodo za merjenje nateznih lastnosti žic, vodnikov in opletov. Ko je potrebno, se lahko uporablja tudi za kable. Uporabljal naj bi se s standardom EN 3475-100.

General Information

• Status: Withdrawn
• Publication Date: 28-Mar-2012
• Withdrawal Date: 12-Mar-2023
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 09-Mar-2023
• Due Date: 01-Apr-2023
• Completion Date: 13-Mar-2023
• Ref Project: EN 3475-505:2012 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 505: Tensile test on conductors and strands

Relations

• Revises: SIST EN 3475-505:2023 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 505: Tensile test on conductors and strands
• Effective Date: 19-Jan-2023
• Replaces: SIST EN 3475-505:2007 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 505: Tensile test on conductors and strands
• Effective Date: 01-May-2012
• Replaces: SIST EN 3475-505:2007 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 505: Tensile test on conductors and strands
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Elektrische Leitungen für Luftfahrtverwendung - Prüfverfahren - Teil 505: Zugfestigkeit der Einzeldrähte und LeiterseileSérie aérospatiale - Câbles électriques à usage aéronautique - Méthodes d’essais - Partie 505: Résistance à la traction des conducteurs et des brinsAerospace series - Cables, electrical, aircraft use - Test methods - Part 505: Tensile test on conductors and strands49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 3475-505:2012SIST EN 3475-505:2012en01-maj-2012SIST EN 3475-505:2012SLOVENSKI
STANDARDSIST EN 3475-505:20071DGRPHãþD



SIST EN 3475-505:2012



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3475-505
March 2012 ICS 49.060 Supersedes EN 3475-505:2007English Version
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 505: Tensile test on conductors and strands
Série aérospatiale - Câbles électriques à usage aéronautique - Méthodes d'essais - Partie 505: Résistance à la traction des conducteurs et des brins
Luft- und Raumfahrt - Elektrische Leitungen für Luftfahrtverwendung - Prüfverfahren - Teil 505: Zugfestigkeit der Einzeldrähte und Leiterseile This European Standard was approved by CEN on 20 August 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3475-505:2012: ESIST EN 3475-505:2012



EN 3475-505:2012 (E) 2 Contents Page Foreword .31 Scope .42 Normative references .43 Terms and definitions .44 Apparatus .55 Method .65.1 Strands .65.2 Conductors .66 Requirements .6Annex A (normative)
Test method: Braid strength measured after separation from finished cable .7 SIST EN 3475-505:2012



EN 3475-505:2012 (E) 3 Foreword This document (EN 3475-505:2012) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 201
...