SIST EN 3660-001:2009
(Main)Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 001: Technical specification
Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 001: Technical specification
This specification defines cable outlet accessories for use with circular and rectangular, electrical and optical connectors on aerospace equipment. These may be sealed or unsealed and include accessories suitable for the suppression of radio frequency and electromagnetic interference.
This standard is used in conjunction with circular and rectangular electrical and optical connectors for varying temperature ranges, environmental conditions, fire resistant and non-fire resistant applications as designated in the product standards.
Luft- und Raumfahrt - Endgehäuse für elektrische und optische Rund- und Rechtecksteckverbinder - Teil 001: Technische Lieferbedingungen
Diese Norm kennzeichnet Endgehäuse für elektrische und optische Rund- und Rechtecksteckverbinder für die Anwendung in der Luft- und Raumfahrt. Diese Endgehäuse können abgedichtet oder nicht abgedichtet sein und umfassen Bauformen, die zur Unterdrückung von Hochfrequenz- und elektromagnetischen Störungen geeignet sind.
Endgehäuse nach dieser Norm finden ihren Einsatz an elektrischen und optischen Rund- und Rechtecksteckverbindern für unterschiedliche Temperaturbereiche, Umweltbedingungen, feuerbeständige und nicht feuerbeständige Anwendungen, wie in den Produktnormen angegeben.
Série aérospatiale - Accessoires arrières pour connecteurs circulaires et rectangulaires électriques et optiques - Partie 001 : Spécification technique
Aeronavtika - Dodatki za okrogle in pravokotne električne in optične konektorje - 001. del: Tehnična specifikacija
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Endgehäuse für elektrische und optische Rund- und Rechtecksteckverbinder - Teil 001: Technische LieferbedingungenSérie aérospatiale - Accessoires arrières pour connecteurs circulaires et rectangulaires électriques et optiques - Partie 001 : Spécification techniqueAerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 001: Technical specification49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 3660-001:2006SIST EN 3660-001:2009en,de01-maj-2009SIST EN 3660-001:2009SLOVENSKI
STANDARD
SIST EN 3660-001:2009
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 3660-001August 2006ICS 49.060 English VersionAerospace series - Cable outlet accessories for circular andrectangular electrical and optical connectors - Part 001:Technical specificationSérie aérospatiale - Accessoires arrières pour connecteurscirculaires et rectangulaires électriques et optiques - Partie001 : Spécification techniqueLuft- und Raumfahrt - Endgehäuse für elektrische undoptische Rund- und Rechtecksteckverbinder - Teil 001:Technische LieferbedingungenThis European Standard was approved by CEN on 20 April 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 3660-001:2006: ESIST EN 3660-001:2009
EN 3660-001:2006 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.5 4 Conditions of use.5 5 Design and description.6 6 Dimensions and mass.6 7 Operation.6 8 Tests.7 9 Quality assurance.8 10 Designation and marking.13 11 Delivery condition.13 12 Packaging.13 13 Storage.13
SIST EN 3660-001:2009
EN 3660-001:2006 (E) 3 Foreword This European Standard (EN 3660-001:2006) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2007, and conflicting national standards shall be withdrawn at the latest by February 2007. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 3660-001:2009
EN 3660-001:2006 (E) 4 1 Scope This specification defines cable outlet accessories for use with circular and rectangular, electrical and optical connectors on aerospace equipment. These may be sealed or unsealed and include accessories suitable for the suppression of radio frequency and electromagnetic interference. This standard is used in conjunction with circular and rectangular electrical and optical connectors for varying temperature ranges, environmental conditions, fire resistant and non-fire resistant applications as designated in the product standards. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 261, ISO general purpose metric screw threads — General plan. ISO 263, ISO inch screw threads — General plan and selection for screws, bolts and nuts — Diameter range 0,06 to 6 in. ISO 965-1, ISO general-purpose metric screw threads — Tolerances — Part 1: Principles and basic data. EN 2591-100*, Aerospace series — Elements of electrical and optical connection — Test methods — Part 100: General.
EN 3660-002, Aerospace series — Cable outlet accessories for circular and rectangular electrical and optical connectors — Part 002: Index of product standards.
EN 9100, Aerospace series — Quality management systems — Requirements (based on ISO 9001:2000) and Quality systems — Model for quality assurance in design, development, production, installation and servicing (based on ISO 9001:1994). EN 9133, Aerospace series — Quality management systems — Qualification Procedure for Aerospace Standard Parts.
IEC 60050-581, International Electrotechnical Vocabulary — Electromechanical components for electronic equipment. MIL-HDBK-454A, General Guidelines for Electronic Equipment. 1)
* All parts quoted in this standard. 1) Published by: Department of Defense (DOD), the Pentagon, Washington, DC 20301, USA. SIST EN 3660-001:2009
EN 3660-001:2006 (E) 5 3 Terms and definitions For the purposes of this European Standard, the terms and definitions given in IEC 60050-581 apply together with the following. 3.1 backshell non-preferred term, use cable outlet accessory 3.2 cable screen termination a device for terminating the cable screen to the cable outlet and giving electrical continuity 3.3 cable tie a flexible strap or cord for securing a cable bundle to a cable outlet 3.4 coupling nut an accessory or part of a component which secures the cable outlet to the body of the connector 4 Conditions of use 4.1 General In accordance with the individual the product standard, refer to EN 3660-002. 4.2 Accessory styles See Table 1. Table 1 Style Description A Cable outlet, unsealed B Cable outlet, sealed C Cable outlet, shielded, unsealed D Cable outlet, shielded, sealed E Conduit adapter, unsealed F Conduit adapter, sealed G Adaptor (misc. incl. rectangular), unsealed H Adaptor (misc. incl. rectangular), sealed J Cable outlet, for heat shrinkable boot, sealed K Cable outlet, for heat shrinkable boot, shielded, sealed
4.3 Material/finish classes See Table 2. SIST EN 3660-001:2009
EN 3660-001:2006 (E) 6 Table 2 Class Temperature range Material/finish A − 65 °C to 200 °C Aluminium/black anodised J − 65 °C to 175 °C Non-metallic/olive drab cadmium plated K − 65 °C to 260 °C Stainless steel/passivated M − 65 °C to 200 °C Non-metallic/electroless nickel plated N − 65 °C to 200 °C Aluminium/electroless nickel plated P − 65 °C to 200 °C Non-metallic/unplated W − 65 °C to 175 °C Aluminium/olive drab cadmium plated
5 Design and description 5.1 Design Cable outlet accessories shall be designed and constructed to withstand normal handling incident to installation and maintenance in service. They shall be capable of being fitted to and removed from connectors by use of hand only unless otherwise specified in the product standard. The cable outlet accessory product standard shall contain outline drawings relating to general installation and interchangeability. 5.2 Materials Materials shall be suitable for the purpose intended and as specified in the product standard. When a definite material is not specified, a material shall be used which will enable the accessory to meet the performance requirements specified in the product standard. When dissimilar materials are employed in intimate contact with each other, protection against corrosion shall be used to ensure that the differential electromotive potential does not exceed 0,25 V. 5.3 Finish The finish shall be in accordance with the product standard. 5.4 Threads The threads shall conform to either ISO 2
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.