oSIST prEN IEC 62541-1:2024
(Main)OPC unified architecture - Part 1: Overview and concepts
OPC unified architecture - Part 1: Overview and concepts
OPC Unified Architecture – Teil 1: Übersicht und Konzepte
Architecture unifiée OPC - Partie 1: Vue d'ensemble et concepts
Enotna arhitektura OPC - 1. del: Pregled in koncepti
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2024
Enotna arhitektura OPC - 1. del: Pregled in koncepti
OPC unified architecture - Part 1: Overview and concepts
Ta slovenski standard je istoveten z: prEN IEC 62541-1:2024
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
65E/1039/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 62541-1 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2024-01-26 2024-04-19
SUPERSEDES DOCUMENTS:
65E/949/NP, 65E/1009/RVN
IEC SC 65E : DEVICES AND INTEGRATION IN ENTERPRISE SYSTEMS
SECRETARIAT: SECRETARY:
United States of America Mr Donald (Bob) Lattimer
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if any,
in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft for
Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which
they are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some Countries”
clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is the final stage for
submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).
TITLE:
OPC Unified Architecture – Part 1: Overview and Concepts
PROPOSED STABILITY DATE: 2026
NOTE FROM TC/SC OFFICERS:
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
Internal
1 CONTENTS
2 Page
4 1 Scope . 1
5 2 Normative References . 1
6 3 Terms, definitions, and abbreviations . 2
7 Document conventions . 2
8 Terms and definitions . 2
9 Abbreviations . 6
10 4 Structure of the OPC UA series . 7
11 Specification organization . 7
12 Specification parts . 7
13 5 Overview . 8
14 Scope . 8
15 General . 9
16 Design goals . 9
17 Integrated models and services. 11
18 Security model . 11
19 Integrated AddressSpace model . 12
20 Integrated object model . 12
21 Integrated services . 12
22 Sessions . 13
23 6 Systems concepts . 13
24 Client Server Overview . 13
25 OPC UA Clients . 14
26 OPC UA Servers . 15
27 General . 15
28 Real objects . 15
29 Server application . 15
30 OPC UA AddressSpace . 15
31 Subscription entities . 16
32 OPC UA Service Interface . 16
33 Server to Server interactions . 16
34 Redundancy . 17
35 Publish-Subscribe . 18
36 Synergy of models . 18
37 Global Services. 19
38 General . 19
39 Discovery Services. 19
40 Certificate Management . 20
41 KeyCredential Management . 20
42 Authorization Services . 20
43 Device Onboarding . 20
44 Alias Names . 20
45 Security Key Service (SKS) . 20
46 7 Client/Server Service Sets . 20
47 General . 20
48 Discovery Service Set . 20
49 SecureChannel Service Set . 21
50 Session Service Set . 22
Internal
IEC CDV 62541-1 © IEC 2023 ii
51 NodeManagement Service Set . 22
52 View Service Set . 22
53 Query Service Set . 22
54 Attribute Service Set . 22
55 Method Service Set . 22
56 MonitoredItem Service Set . 22
57 Subscription Service Set . 23
60 FIGURES
62 Figure 1 – OPC UA target applications . 10
63 Figure 2 – OPC UA System architecture . 13
64 Figure 3 – OPC UA Client architecture . 14
65 Figure 4 – OPC UA Server architecture . 15
66 Figure 5 – Peer-to-peer interactions between Servers . 17
67 Figure 6 – Chained Server example. 17
68 Figure 7 – Integrated Client Server and PubSub models . 19
69 Figure 8 – SecureChannel and Session Services . 21
72 TABLES
73 No table of figures entries found.
Internal
iii IEC CDV 62541-1 © IEC 2023
75 INTERNATIONAL ELECTROTECHNICAL COMMISSION
76 ____________
78 OPC UNIFIED ARCHITECTURE –
80 Part 1: Overview and Concepts
82 FOREWORD
83 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national
84 electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all
85 questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities,
86 IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS)
87 and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC
88 National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental
89 and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with
90 the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between
91 the two organizations.
92 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus
93 of opinion on the relevant subjects since each technical committee has representation from all interested IEC National
94 Committees.
95 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in
96 that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC
97 cannot be held responsible for the way in which they are used or for any misinterpretation by any end user.
98 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to
99 the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and
100 the corresponding national or regional publication shall be clearly indicated in the latter.
101 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment
102 services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by
103 independent certification bodies.
104 6) All users should ensure that they have the latest edition of this publication.
105 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of
106 its technical committees and IEC National Committees for any personal injury, property damage or other damage of any
107 nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication,
108 use of, or reliance upon, this IEC Publication or any other IEC Publications.
109 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable
110 for the correct application of this publication.
111 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights.
112 IEC shall not be held responsible for identifying any or all such patent rights.
113 The main task of IEC technical committees is to prepare International Standards. However, a technical
114 committee may propose the publication of a technical report when it has collected data of a different
115 kind from that which is normally published as an International Standard, for example "state of the art".
116 International Standard IEC 62541-1 has been prepared by subcommittee 65E: Devices and integration
117 in enterprise systems, of IEC technical committee 65: Industrial-process measurement, control and
118 automation.
119 The text of this international standard is based on the following documents:
CDV Report on voting
65E/XX/CDV 65E/XX/RVC
121 Full information on the voting for the approval of this international standard can be found
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.