SIST EN 60384-11-1:2008
(Main)Fixed capacitors for use in electronic equipment -- Part 11-1: Blank detail specification - Fixed polyethylene-terephthalate film dielectric metal foil d.c. capacitors - Assessment level EZ
Fixed capacitors for use in electronic equipment -- Part 11-1: Blank detail specification - Fixed polyethylene-terephthalate film dielectric metal foil d.c. capacitors - Assessment level EZ
This part of IEC 60384 applies to fixed direct current capacitors, for rated voltages not exceeding 6 300 V, using as dielectric a polyethylene-terephthalate film and electrodes of thin metal foils. For capacitors with rated voltages exceeding 1 000 V, additional tests and requirements may be specified in the detail specification. The capacitors covered by this standard are intended for use in electronic equipment.
Festkondensatoren zur Verwendung in Geräten der Elektronik - Teil 11-1: Vordruck für Bauartspezifikation - Festkondensatoren mit einem Dielektrikum aus Polyethylen-Terephthalat und Belägen aus dünnen Metallfolien für Gleichspannung - Bewertungsstufe EZ
Condensateurs fixes utilisés dans les équipements électroniques - Partie 11-1 : Spécification particulière cadre - Condensateurs fixes pour courant continu à diélectrique en film de polytéréphtalate d'éthylène à armatures en feuilles métalliques - Niveau d'assurance de la qualité EZ
Fiksni kondenzatorji za elektronsko opremo - 11-1. del: Okvirna podrobna specifikacija - Fiksni kondenzatorji za enosmerni tok s polietilen-tereftalatnim plastnim dielektrikom in kovinsko folijo - Ocenjevalni nivo E (IEC 60384-11-1:2008)
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Fixed capacitors for use in electronic equipment - Part 11-1: Blank detail specification - Fixed polyethylene terephthalate film dielectric metal foil d.c. capacitors - Assessment level E (IEC 60384-11-1:2008)Fiksni kondenzatorji za elektronsko opremo - 11-1. del: Okvirna podrobna specifikacija - Fiksni kondenzatorji za enosmerni tok s polietilen-tereftalatnim plastnim dielektrikom in kovinsko folijo - Ocenjevalni nivo E (IEC 60384-11-1:2008)Condensateurs fixes utilisés dans les équipements électroniques - Partie 11-1 : Spécification particulière cadre - Condensateurs fixes pour courant continu à diélectrique en film de polytéréphtalate d'éthylène à armatures en feuilles métalliques - Niveau d'assurance de la qualité EZ (CEI 60384-11-1:2008)Festkondensatoren zur Verwendung in Geräten der Elektronik - Teil 11-1: Vordruck für Bauartspezifikation - Festkondensatoren mit einem Dielektrikum aus Polyethylen-Terephthalat und Belägen aus dünnen Metallfolien für Gleichspannung - Bewertungsstufe EZ (IEC 60384-11-1:2008)31.060.10Fiksni kondenzatorjiFixed capacitorsICS:SIST EN 60384-11-1:2008enTa slovenski standard je istoveten z:EN 60384-11-1:200801-julij-2008SIST EN 60384-11-1:2008SLOVENSKI
STANDARD
EUROPEAN STANDARD EN 60384-11-1 NORME EUROPÉENNE
EUROPÄISCHE NORM April 2008
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2008 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60384-11-1:2008 E
ICS 31.060.30
English version
Fixed capacitors for use in electronic equipment -
Part 11-1: Blank detail specification -
Fixed polyethylene-terephthalate film dielectric metal foil d.c. capacitors -
Assessment level EZ (IEC 60384-11-1:2008)
Condensateurs fixes utilisés
dans les équipements électroniques -
Partie 11-1: Spécification
particulière cadre -
Condensateurs fixes pour courant continu à diélectrique en film de polytéréphtalate d'éthylène à armatures
en feuilles métalliques -
Niveau d'assurance de la qualité EZ (CEI 60384-11-1:2008)
Festkondensatoren zur Verwendung
in Geräten der Elektronik -
Teil 11-1: Vordruck
für Bauartspezifikation -
Festkondensatoren mit einem Dielektrikum aus Polyethylen-Terephthalat und Belägen aus dünnen Metallfolien
für Gleichspannung -
Bewertungsstufe EZ (IEC 60384-11-1:2008)
This European Standard was approved by CENELEC on 2008-03-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
EN 60384-11-1:2008
- 2 -
Foreword The text of document 40/1840/CDV, future edition 2 of IEC 60384-11-1, prepared by IEC TC 40, Capacitors and resistors for electronic equipment, was submitted to the IEC-CENELEC parallel Unique Acceptance Procedure and was approved by CENELEC as EN 60384-11-1 on 2008-03-01. The following dates were fixed: – latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop)
2008-12-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow)
2011-03-01 Annex ZA has been added by CENELEC. __________ Endorsement notice The text of the International Standard IEC 60384-11-1:2008 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following note has to be added for the standard indicated: IEC 60384-1 NOTE
Harmonized as EN 60384-1:2001 (modified). __________
- 3 - EN 60384-11-1:2008 Annex ZA(normative)
Normative references to international publications with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Publication Year Title EN/HD Year
IEC 60384-11 -1) Fixed capacitors for use in electronic equipment -
Part 11: Sectional specification - Fixed polyethylene-terephthalate film dielectric metal foil d.c.capacitors EN 60384-11 20082)
1) Undated reference. 2) Valid edition at date of issue.
IEC 60384-11-1Edition 2.0 2008-02INTERNATIONAL STANDARD
Fixed capacitors for use in electronic equipment –
Part 11-1: Blank detail specification – Fixed polyethylene-terephthalate film dielectric metal foil d.c. capacitors – Assessment level EZ
INTERNATIONAL ELECTROTECHNICAL COMMISSION MICS 31.060.30 PRICE CODEISBN 2-8318-9609-6QC 300101
– 2 – 60384-11-1 © IEC:2008(E) INTERNATIONAL ELECTROTECHNICAL COMMISSION ____________
FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT –
Part 11-1: Blank detail specification –
Fixed polyethylene-terephthalate film
dielectric metal foil d.c. capacitors –
Assessment level EZ
FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60384-11-1 has been prepared by IEC technical committee 40: Capacitors and resistors for electronic equipment. This second edition cancels and replaces the first edition published in 1988 and constitutes a minor revision related to tables, figures and references. The text of this standard is based on the following documents: CDV Report on voting 40/1840/CDV 40/1865/RVC
Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table.
60384-11-1 © IEC:2008(E) – 3 – This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. The QC number that appears on the front cover of this publication is the specification number in the IECQ Quality Assessment System for Electronic Components (IECQ). The list of all parts of the IEC 60384 series, under the (new) general title Fixed capacitors for use in electronic equipment, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in the data related to the specific publication. At this date, the publication will be • reconfirmed, • withdrawn, • replaced by a revised edition, or • amended. A bilingual version of this publication may be issued at a later date.
– 4 – 60384-11-1 © IEC:2008(E) FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT –
Part 11-1: Blank detail specification –
Fixed polyethylene-terephthalate film
dielectric metal foil d.c. capacitors –
Assessment level EZ
INTRODUCTION Blank detail specification A blank detail specification is a supplementary document to the sectional specification and contains requirements for style and layout and minimum content of detail specifications. Detail specifications not complying with these requirements may not be considered as being in accordance with IEC specifications nor shall they so be described. In the preparation of detail specifications, the content of 1.4 of the sectional specification shall be taken into account. The numbers between brackets on the first page correspond to the following information which shall be inserted in the position indicated. Identification of the detail specification [1] The "International Electrotechnical Commission" or the National Standards Organization under whose authority the detail specification is drafted. [2] The IEC or National Standards number of the detail specification, date of issue and any further information required by the national system. [3] The number and issue number of the IEC or national generic specification. [4] The IEC number of the blank detail specification. Identification of the capacitor [5] A short description of the type of capacitor. [6] Information on typical construction (when applicable). NOTE When the capacitor is not designed for use in printed-board applications, this shall be clearly stated in the detail specification in this position. [7] Outline drawing with main dimensions which are of importance for interchangeability and/or reference to the national or international documents for outlines. Alternatively, this drawing may be given in an annex to the detail specification
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.