SIST EN IEC 60384-22:2024

Fixed capacitors for use in electronic equipment - Part 22: Sectional specification - Fixed surface mount multilayer capacitors of ceramic dielectric, class 2 (IEC 60384-22:2024)

IEC 60384-22:2024 is applicable to fixed unencapsulated surface mount multilayer capacitors of ceramic dielectric, Class 2, for use in electronic equipment. These capacitors have metallized connecting pads or soldering strips and are intended to be mounted on printed boards, or directly onto substrates for hybrid circuits.
Capacitors for electromagnetic interference suppression are not included but are covered by IEC 60384-14. The object of this document is to specify preferred ratings and characteristics and to select from IEC 60384-1:2021 the appropriate quality assessment procedures, tests and measuring methods and to give general performance requirements for this type of capacitor. Test severities and requirements specified in detail specifications referring to this sectional specification provide specific test severities and requirements of an equal or higher performance level. Further information on the conception of generic, sectional and detail specifications can be found in the Introduction of IEC 60384-1:2021.
This edition includes the following significant technical changes with respect to the previous edition:
a) The document has been completely restructured to comply with the ISO/IEC Directives, Part 2 and to make it more useable; tables, figures and references have been revised accordingly.
b) The requirements of reference temperature 25 °C has been added in Table 5, Table 9, Table 10, Table 12, Table 14 and Table 17.
c) The table of temperature characteristics of capacitance for the reference temperature 25 °C have been added in Table C.1, Table C.2 and Table C.3.
d) The requirement in 5.5.2 (visual examination) has been repeated in 5.9.3, 5.10.6, 5.11.4, 5.12.6, 5.13.8, 5.14.6 and 5.15.6.
e) The deflection D in the very robust designs has been added in 5.9.1.
f) Annex C has been changed informative into normative.
g) Clause D.5 (Test schedule for quality conformance inspection) has been newly added to withdraw the blank detail specification: IEC 60384-22-1.

Festkondensatoren zur Verwendung in Geräten der Elektronik - Teil 22: Rahmenspezifikation - Oberflächenmontierbare Vielschichtkeramik-Festkondensatoren, Klasse 2 (IEC 60384-22:2024)

Condensateurs fixes utilisés dans les équipements électroniques - Partie 22: Spécification intermédiaire - Condensateurs multicouches fixes à diélectriques en céramique pour montage en surface, de classe 2 (IEC 60384-22:2024)

L'IEC 60384-22:2024 est applicable aux condensateurs multicouches fixes à diélectriques en céramique pour montage en surface non encapsulés, Classe 2, utilisés dans les équipements électroniques. Ces condensateurs possèdent des pastilles de connexion métallisées ou des bandes de brasure et sont destinés à être montés sur des cartes imprimées ou directement sur des substrats de circuits hybrides. Les condensateurs d’antiparasitage ne sont pas inclus, mais sont couverts par l’IEC 60384-14. Le présent document a pour objet de spécifier les valeurs assignées et caractéristiques préférentielles, de sélectionner, en se référant à l’IEC 60384-1:2021, les procédures d’assurance qualité appropriées, les essais et les méthodes de mesure et de donner les exigences de performances générales pour ce type de condensateur. Les sévérités et les exigences des essais spécifiées dans les spécifications particulières se référant au présent document fournissent des sévérités et des exigences d’essai d’un niveau de performance supérieur ou égal. Pour plus d’informations sur la conception des spécifications génériques, intermédiaires et particulières, voir l’Introduction de l’IEC 60384-1:2021.
Cette édition inclut les modifications techniques majeures suivantes par rapport à l’édition précédente:
a) le document a été entièrement restructuré pour se conformer aux directives ISO/IEC, Partie 2, et pour en faciliter l’utilisation; les tableaux, les figures et les références ont été révisés en conséquence; l’Annexe X comporte toutes les références croisées des changements de numérotation des articles/paragraphes;
b) les exigences relatives à la température de référence de 25 °C ont été ajoutées dans le Tableau 5, le Tableau 9, le Tableau 10, le Tableau 12, le Tableau 14 et le Tableau 17;
c) le tableau des caractéristiques de température de la capacité pour la température de référence de 25 °C a été ajouté dans le Tableau C.1, le Tableau C.2 et le Tableau C.3;
d) l’exigence de 5.5.2 (examen visuel) a été répétée en 5.9.3, en 5.10.6, en 5.11.4, en 5.12.6, en 5.13.8, en 5.14.6 et en 5.15.6;
e) la flèche D dans les modèles très robustes a été ajoutée en 5.9.1;
f) l’Annexe C est passée d’informative à normative;
g) l’Article D.5 (Programme d’essais pour le contrôle de conformité de la qualité) a été ajouté pour retirer la spécification particulière-cadre: IEC 60384-22-1.

Fiksni kondenzatorji za uporabo v elektronski opremi - 22. del: Področna specifikacija - Fiksni večplastni kondenzatorji za površinsko namestitev s keramičnim dielektrikom, razred 2 (IEC 60384-22:2024)

Standard IEC 60384-22:2024 se uporablja za fiksne nezaprte večplastne kondenzatorje za površinsko namestitev s keramičnim dielektrikom razreda 2 za uporabo v elektronski opremi. Ti kondenzatorji imajo metalizirane priključne blazinice ali varilne trakove ter so namenjeni namestitvi na tiskana vezja ali neposredno na podlage za hibridne tokokroge.
Kondenzatorji za preprečevanje elektromagnetnih motenj niso vključeni, vendar so zajeti v standardu IEC 60384-14. Cilj tega dokumenta je določiti prednostne vrednosti in lastnosti, izbrati primerne postopke za ovrednotenje kakovosti, preskuse in merilne metode iz standarda IEC 60384-1:2021 ter podati splošne zahteve glede zmogljivosti za ta tip kondenzatorja. Preskusne stopnje in zahteve, določene v podrobnih specifikacijah, ki se navezujejo na to področno specifikacijo, so na enaki ali višji ravni zmogljivosti. Več informacij o oblikovanju splošnih, področnih in podrobnih specifikacij je na voljo v uvodu standarda IEC 60384-1:2021.
Ta izdaja v primerjavi s prejšnjo vključuje naslednje pomembne tehnične spremembe:
a) dokument je bil v celoti preoblikovan tako, da je skladen z 2. delom direktiv ISO/IEC in je njegova vsebina uporabnejša; preglednice, slike in sklici so bili ustrezno pregledani;
b) v preglednicah 5, 9, 10, 12, 14 in 17 so bile dodane zahteve za referenčno temperaturo 25 °C;
c) v preglednicah C.1, C.2 in C.3 so bile dodane temperaturne lastnosti kapacitivnosti za referenčno temperaturo 25 °C;
d) zahteva iz točke 5.5.2 (vizualni pregled) je bila ponovljena v točkah 5.9.3, 5.10.6, 5.11.4, 5.12.6, 5.13.8, 5.14.6 in 5.15.6;
e) v točki 5.9.1 je bil dodan odklon (D) pri zelo robustnih izvedbah;
f) dodatek C je bil spremenjen iz informativnega v normativni;
g) dodana je bila nova točka D.5 (Razpored preskusov za prevzemno kontrolo), ki je nadomestila okvirno podrobno specifikacijo: IEC 60384-22-1.

General Information

• Status: Published
• Public Enquiry End Date: 14-Sep-2023
• Publication Date: 18-Aug-2024
• ICS: 31.060.10 - Fixed capacitors
• Technical Committee: I11 - Imaginarni 11
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 07-Aug-2024
• Due Date: 12-Oct-2024
• Completion Date: 19-Aug-2024
• Ref Project: EN IEC 60384-22:2024 - Fixed capacitors for use in electronic equipment - Part 22: Sectional specification - Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2

Relations

• Revises: SIST EN IEC 60384-22:2019 - Fixed capacitors for use in electronic equipment - Part 22: Sectional specification - Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2 (IEC 60384-22:2019)
• Effective Date: 22-Mar-2022

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2024
Fiksni kondenzatorji za uporabo v elektronski opremi - 22. del: Področna
specifikacija - Fiksni večplastni kondenzatorji za površinsko namestitev s
keramičnim dielektrikom, razred 2 (IEC 60384-22:2024)
Fixed capacitors for use in electronic equipment - Part 22: Sectional specification - Fixed
surface mount multilayer capacitors of ceramic dielectric, class 2 (IEC 60384-22:2024)
Festkondensatoren zur Verwendung in Geräten der Elektronik - Teil 22:
Rahmenspezifikation - Oberflächenmontierbare Vielschichtkeramik-Festkondensatoren,
Klasse 2 (IEC 60384-22:2024)
Condensateurs fixes utilisés dans les équipements électroniques - Partie 22:
Spécification intermédiaire - Condensateurs multicouches fixes à diélectriques en
céramique pour montage en surface, de classe 2 (IEC 60384-22:2024)
Ta slovenski standard je istoveten z: EN IEC 60384-22:2024
ICS:
31.060.10 Fiksni kondenzatorji Fixed capacitors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 60384-22

NORME EUROPÉENNE
EUROPÄISCHE NORM August 2024
ICS 31.060.10 Supersedes EN IEC 60384-22:2019
English Version
Fixed capacitors for use in electronic equipment - Part 22:
Sectional specification - Fixed surface mount multilayer
capacitors of ceramic dielectric, Class 2
(IEC 60384-22:2024)
Condensateurs fixes utilisés dans les équipements Festkondensatoren zur Verwendung in Geräten der
électroniques - Partie 22: Spécification intermédiaire - Elektronik - Teil 22: Rahmenspezifikation -
Condensateurs multicouches fixes à diélectriques en Oberflächenmontierbare Vielschichtkeramik-
céramique pour montage en surface, de Classe 2 Festkondensatoren, Klasse 2
(IEC 60384-22:2024) (IEC 60384-22:2024)
This European Standard was approved by CENELEC on 2024-07-26. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60384-22:2024 E

European foreword
The text of document 40/3120/FDIS, future edition 4 of IEC 60384-22, prepared by IEC/TC 40
"Capacitors and resistors for electronic equipment" was submitted to the IEC-CENELEC parallel vote
and approved by CENELEC as EN IEC 60384-22:2024.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2025-04-26
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2027-07-26
document have to be withdrawn
This document supersedes EN IEC 60384-22:2019 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60384-22:2024 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standard indicated:
IEC 60063 NOTE Approved as EN 60063
IEC 60068-1:2013 NOTE Approved as EN 60068-1:2014 (not modified)
IEC 60384-14 NOTE Approved as EN IEC 60384-14
IEC 60384-22-1:2004 NOTE Approved as EN 60384-22-1:2004 (not modified)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Publication Year Title EN/HD Year
IEC 60068-2-58 - Environmental testing - Part 2-58: Tests - EN 60068-2-58 -
Test Td: Test methods for solderability,
resistance to dissolution of metallization
and to soldering heat of surface mounting
devices (SMD)
IEC 60384-1 2021 Fixed capacitors for use in electronic EN IEC 60384-1 2021
equipment - Part 1: Generic specification
IEC 61193-2 2007 Quality assessment systems - Part 2: EN 61193-2 2007
Selection and use of sampling plans for
inspection of electronic components and
packages
IEC 60384-22 ®
Edition 4.0 2024-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fixed capacitors for use in electronic equipment –

Part 22: Sectional specification – Fixed surface mount multilayer capacitors of

ceramic dielectric, Class 2
Condensateurs fixes utilisés dans les équipements électroniques –

Partie 22: Spécification intermédiaire – Condensateurs multicouches fixes à

diélectriques en céramique pour montage en surface, de Classe 2

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 31.060.10  ISBN 978-2-8322-8919-8

– 2 – IEC 60384-22:2024 © IEC 2024
CONTENTS
FOREWORD . 6
1 Scope . 8
2 Normative references . 8
3 Terms and definitions . 8
4 Preferred ratings and characteristics . 9
4.1 Preferred characteristics . 9
4.2 Preferred values of ratings . 10
4.2.1 Rated temperature (T ) . 10
R
4.2.2 Rated voltage (U ) . 10
R
4.2.3 Category voltage (U ) . 10
C
4.2.4 Preferred values of nominal capacitance and associated tolerance
values . 10
4.2.5 Temperature characteristic of capacitance . 11
4.2.6 Dimensions . 11
5 Test and measurement procedures . 12
5.1 General . 12
5.2 Special preconditioning . 12
5.3 Measuring conditions . 12
5.4 Mounting . 12
5.5 Visual examination and check of dimensions . 12
5.5.1 General . 12
5.5.2 Visual examination . 12
5.5.3 Requirements . 12
5.6 Electrical tests . 14
5.6.1 Capacitance . 14
5.6.2 Tangent of loss angle (tan δ) . 15
5.6.3 Insulation resistance . 15
5.6.4 Voltage proof . 16
5.6.5 Impedance (if required by the detail specification) . 17
5.6.6 Equivalent series resistance [ESR] (if required by the detail

specification) . 17
5.7 Temperature characteristic of capacitance (reference temperature 20 °C) .     17
5.7.1 Special preconditioning . 17
5.7.2 Measuring conditions . 17
5.7.3 Requirements . 18
5.8 Shear test . 18
5.9 Substrate bending test . 18
5.9.1 General . 18
5.9.2 Initial measurement . 19
5.9.3 Final inspection . 19
5.10 Resistance to soldering heat . 19
5.10.1 General . 19
5.10.2 Special preconditioning . 19
5.10.3 Initial measurement . 19
5.10.4 Test conditions . 19
5.10.5 Recovery . 20

IEC 60384-22:2024 © IEC 2024 – 3 –
5.10.6 Final inspection, measurements and requirements. 20
5.11 Solderability . 21
5.11.1 General . 21
5.11.2 Test conditions . 21
5.11.3 Recovery . 22
5.11.4 Final inspection, measurements and requirements. 22
5.12 Rapid change of temperature . 22
5.12.1 General . 22
5.12.2 Special preconditioning . 22
5.12.3 Initial measurement . 22
5.12.4 Number of cycles . 22
5.12.5 Recovery . 22
5.12.6 Final inspection, measurements and requ
...