Protective clothing - General requirements - Amendment 1 (ISO 13688:2013/Amd 1:2021)

2021-03-01 - Lack of compliance - publication on hold

Schutzkleidung - Allgemeine Anforderungen - Änderung 1 (ISO 13688:2013/Amd 1:2021)

[Not available]

Vêtements de protection - Exigences générales - Amendement 1 (ISO 13688:2013/Amd 1:2021)

Varovalna obleka - Splošne zahteve - Dopolnilo A1 (ISO 13688:2013/Amd 1:2021)

General Information

Status
Published
Public Enquiry End Date
19-Oct-2019
Publication Date
27-Oct-2021
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
28-Oct-2021
Due Date
02-Jan-2022
Completion Date
28-Oct-2021

RELATIONS

Buy Standard

Amendment
SIST EN ISO 13688:2013/A1:2021
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Amendment
SIST EN ISO 13688:2013/oprA1:2019
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN ISO 13688:2013/A1:2021
01-december-2021
Varovalna obleka - Splošne zahteve - Dopolnilo A1 (ISO 13688:2013/Amd 1:2021)
Protective clothing - General requirements - Amendment 1 (ISO 13688:2013/Amd
1:2021)

Schutzkleidung - Allgemeine Anforderungen - Änderung 1 (ISO 13688:2013/Amd 1:2021)

Vêtements de protection - Exigences générales - Amendement 1 (ISO 13688:2013/Amd
1:2021)
Ta slovenski standard je istoveten z: EN ISO 13688:2013/A1:2021
ICS:
13.340.10 Varovalna obleka Protective clothing
SIST EN ISO 13688:2013/A1:2021 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 13688:2013/A1:2021
---------------------- Page: 2 ----------------------
SIST EN ISO 13688:2013/A1:2021
EN ISO 13688:2013/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2021
EUROPÄISCHE NORM
ICS 13.340.10
English Version
Protective clothing - General requirements - Amendment 1
(ISO 13688:2013/Amd 1:2021)

Vêtements de protection - Exigences générales - Schutzkleidung - Allgemeine Anforderungen -

Amendement 1 (ISO 13688:2013/Amd 1:2021) Änderung 1 (ISO 13688:2013/Amd 1:2021)

This amendment A1 modifies the European Standard EN ISO 13688:2013; it was approved by CEN on 20 February 2021.

This European Standard was corrected and reissued by the CEN-CENELEC Management Centre on 20 October 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of

this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the

same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATIO N
EUROPÄISCHES KOMITEE FÜR NORMUN G
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13688:2013/A1:2021 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 13688:2013/A1:2021
EN ISO 13688:2013/A1:2021 (E)
Contents Page

European foreword ....................................................................................................................................................... 3

Annex ZA (informative) Relationship between this European Standard and the essential

requirements of Regulation (EU) 2016/425 of the European Parliament and of the

Council of 9 March 2016 on personal protective equipment aimed to be covered................. 5

---------------------- Page: 4 ----------------------
SIST EN ISO 13688:2013/A1:2021
EN ISO 13688:2013/A1:2021 (E)
European foreword

This document (EN ISO 13688:2013/A1:2021) has been prepared by Technical Committee ISO/TC 94

"Personal safety - Personal protective equipment" in collaboration with Technical Committee CEN/TC

162 “Protective clothing including hand and arm protection and lifejackets” the secretariat of which is

held by DIN.

This Amendment to the European Standard EN ISO 13688:2013 shall be given the status of a national

standard, either by publication of an identical text or by endorsement, at the latest by March 2022, and

conflicting national standards shall be withdrawn at the latest by March 2022.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CEN shall not be held responsible for identifying any or all such patent rights.

This document has been prepared under a Standardization Request given to CEN by the European

Commission and the European Free Trade Association, and supports essential requirements of EU

Directive(s) / Regulation(s).

For the relationship with EU Directive(s) / Regulation(s), see informative Annex ZA, which is an integral

part of this document.

Any feedback and questions on this document should be directed to the users’ national standards

body/national committee. A complete listing of these bodies can be found on the CEN websites.

This amendment EN ISO 13688:2013/A1:2021 modifies EN ISO 13688:2013 with the following main

changes:
• Foreword, replacement of “shoulder length” with “shoulder point”;

• Clause 2, Clause 6 and following sub-clauses (4.2, 5.3, 7.2): some normative references have

been updated (ISO 8559-1 and ISO 8559-2 replacing ISO 3635) and all the normative references

have been dated (except ISO 7000);

• Definition 3.6, the expression has been change with “waist to waist over the shoulder line”;

• Sub-clause 5.2, the series ISO 3175 has been extended to Parts 5 and 6;

• Clause 6, Table A.1 has been updated in order to take into consideration the replacement of ISO

3635 by ISO 8559-1 and ISO 8559-2;
• Sub-clause 7.1, it has been detailed that “10 mm” refers to the number height;
• Sub-clause 7.2, the use of pictogram(s) has been redrafted;
• In Figure D.3, the lines representing the breast have been removed;
• In Figure D.4, the expression “for men” has been removed;

• In Table E.1, the pictograms of “date of manufacture”, “use by date” and “protection against the

thermal effect of electric arc” have been added;
Annex ZA has been modified in order to refer to Regulation (EU) 2016/425.
---------------------- Page: 5 ----------------------
SIST EN ISO 13688:2013/A1:2021
EN ISO 13688:2013/A1:2021 (E)

According to the CEN-CENELEC Internal Regulations, the national standards organizations of the

following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,

Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,

Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of

North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the

United Kingdom.
Endorsement notice

The text of ISO 13688:2013/Amd 1:2021 has been approved by CEN as EN ISO 13688:2013/A1:2021

without any modification.
---------------------- Page: 6 ----------------------
SIST EN ISO 13688:2013/A1:2021
EN ISO 13688:2013/A1:2021 (E)
Annex ZA
(informative)
Relationship between this European Standard and the essential
requirements of Regulation (EU) 2016/425 of the European Parliament and
of the Council of 9 March 2016 on personal protective equipment aimed to
be covered

This European Standard has been prepared under a Commission’s standardization request to provide

one voluntary means of conforming to essential requirements of Regulation (EU) 2016/425 of the

European Parliament and of the Council of 9 March 2016 on personal protective equipment.

Once this standard is cited in the Official Journal of the European Union under that Regulation (EU)

2016/425, compliance with the normative clauses of this standard given in Table ZA.1 confers, within

the limits of the scope of this standard, a presumption of conformity with the corresponding essential

requirements of that Regulation (EU) 2016/425 and associated EFTA regulations.

Table ZA.1 — Correspondence between this European Standard and Regulation (EU) 2016/425

Requirements of Regulation Clause(s)/sub-clause(s) of Remarks/Notes
(EU) 2016/425 this EN
1.2.1 5.3
1.2.1.1 4.2
1.2.1.2 4.4
1.4 8
2.12 6, 7

WARNING 1 — Presumption of conformity stays valid only as long as a reference to this European

Standard is maintained in the list published in the Official Journal of the European Union. Users of this

standard should consult frequently the latest list published in the Official Journal of the European

Union.

WARNING 2 — Other Union legislation may be applicable to the product(s) falling within the scope of

this standard.
---------------------- Page: 7 ----------------------
SIST EN ISO 13688:2013/A1:2021
---------------------- Page: 8 ----------------------
SIST EN ISO 13688:2013/A1:2021
INTERNATIONAL ISO
STANDARD 13688
Second edition
2013-07-15
AMENDMENT 1
2021-02
Protective clothing — General
requirements
AMENDMENT 1
Vêtements de protection — Exigences générales
AMENDEMENT 1
Reference number
ISO 13688:2013/Amd.1:2021(E)
ISO 2021
---------------------- Page: 9 ----------------------
SIST EN ISO 13688:2013/A1:2021
ISO 13688:2013/Amd.1:2021(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2021

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting

on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address

below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved
---------------------- Page: 10 ----------------------
SIST EN ISO 13688:2013/A1:2021
ISO 13688:2013/Amd.1:2021(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received (see www .iso .org/ patents).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment,

as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the

Technical Barriers to Trade (TBT) see the following URL: www .iso .org/ iso/ foreword .html.

This document was prepared by ISO/TC 94, Personal safety — Personal protective equipment, SC 13,

Protective clothing.

Any feedback or questions on this document should be directed to the user’s national standards body. A

complete listing of these bodies can be found at www .iso .org/ members .html.
© ISO 2021 – All rights reserved iii
---------------------- Page: 11 ----------------------
SIST EN ISO 13688:2013/A1:2021
---------------------- Page: 12 ----------------------
SIST EN ISO 13688:2013/A1:2021
ISO 13688:2013/Amd.1:2021(E)
Protective clothing — General requirements
AMENDMENT 1
Foreword
Replace

“— Additional definitions on waist to waist over the shoulder length, and torso.”

with
“— Additional definitions on waist to waist over the shoulder line, and torso."
Normative references
Replace
“ISO 3071, Textiles — Determination of pH of aqueous extract

ISO 3175-1, Textiles — Professional care, drycleaning and wetcleaning of fabrics and garments — Part 1:

Assessment of performance after cleaning and finishing

ISO 3635, Size designation of clothes — Definitions and body measurement procedure

ISO 3758, Textiles — Care labelling code using symbols
ISO 4045, L
...

SLOVENSKI STANDARD
SIST EN ISO 13688:2013/oprA1:2019
01-oktober-2019
Varovalna obleka - Splošne zahteve - Dopolnilo A1 (ISO 13688:2013/DAM 1:2019)
Protective clothing - General requirements - Amendment 1 (ISO 13688:2013/DAM
1:2019)
Schutzkleidung - Allgemeine Anforderungen - Änderung 1 (ISO 13688:2013/DAM
1:2019)
Vêtements de protection - Exigences générales - Amendement 1 (ISO 13688:2013/DAM
1:2019)
Ta slovenski standard je istoveten z: EN ISO 13688:2013/prA1
ICS:
13.340.10 Varovalna obleka Protective clothing
SIST EN ISO 13688:2013/oprA1:2019 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 13688:2013/oprA1:2019
---------------------- Page: 2 ----------------------
SIST EN ISO 13688:2013/oprA1:2019
DRAFT AMENDMENT
ISO 13688:2013/DAM 1
ISO/TC 94/SC 13 Secretariat: SNV
Voting begins on: Voting terminates on:
2019-08-15 2019-11-07
Protective clothing — General requirements
AMENDMENT 1
Vêtements de protection — Exigences générales
AMENDEMENT 1
ICS: 13.340.10
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO 13688:2013/DAM 1:2019(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. ISO 2019
---------------------- Page: 3 ----------------------
SIST EN ISO 13688:2013/oprA1:2019
ISO 13688:2013/DAM 1:2019(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2019

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting

on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address

below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved
---------------------- Page: 4 ----------------------
SIST EN ISO 13688:2013/oprA1:2019
ISO 13688:2013/DAM 1:2019(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received (see www .iso .org/patents).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment,

as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the

Technical Barriers to Trade (TBT) see the following URL: www .iso .org/iso/foreword .html.

The committee responsible for this document is ISO/TC 94/SC 13, Protective clothing.

© ISO 2019 – All rights reserved iii
---------------------- Page: 5 ----------------------
SIST EN ISO 13688:2013/oprA1:2019
---------------------- Page: 6 ----------------------
SIST EN ISO 13688:2013/oprA1:2019
ISO 13688:2013/DAM 1:2019(E)
Protective clothing — General requirements
AMENDMENT 1
1 Modification to Foreword
Replace

“— Additional definitions on waist to waist over the shoulder length, and torso.”

with
“— Additional definitions on waist to waist over the shoulder line, and torso."
2 Modification to Clause 2, “Normative references”
Replace

“ISO 3635, Size designation of clothes — Definitions and body measurement procedure

EN 14362-1, Textiles — Methods for determination of certain aromatic amines der
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.