Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings - Amendment 1 (ISO 15877-3:2009/AMD 1:2010)

This part of ISO 15877 specifies the characteristics of fittings made from chlorinated poly(vinyl chloride) (PVCC) for piping systems intended to be used for hot and cold water installations within buildings for the conveyance of water, whether or not intended for human consumption (domestic systems) and for heating systems under design pressures and temperatures according to the class of application (see Table 1 of ISO 15877-1:2009). This part of ISO 15877 covers a range of service conditions (application classes) and design pressure classes. For values of TD, Tmax and Tmal in excess of those in Table 1 of ISO 15877-1:2009, this part of ISO 15877 does not apply. It also specifies the parameters for the test methods referred to in this part of ISO 15877. In conjunction with the other parts of ISO 15877, it is applicable to PVC-C fittings, their joints and joints with components of PVC-C, other plastics and non-plastics materials intended to be used for hot and cold water installations. This part of ISO 15877 is applicable to fittings of the following types: - fittings for solvent cement joints; - mechanical fittings; - fittings with incorporated inserts.

Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Chloriertes Polyvinylchlorid (PVC-C) - Teil 3: Formstücke - Änderung 1 (ISO 15877-3:2009/AMD 1:2010)

Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Poly(chlorure de vinyle) chloré (PVC-C) - Partie 3: Raccords - Amendement 1 (ISO 15877-3:2009/AMD 1:2010)

Cevni sistemi iz polimernih materialov za napeljave z vročo in hladno vodo - Klorirani polivinilklorid (PVC-C) - 3. del: Fitingi - Dopolnilo 1 (ISO 15877-3:2009/AMD 1:2010)

Ta del ISO 15877 določa značilnosti fitingov iz kloriranega polivinilklorida (PVC-C) za cevne sisteme, namenjene uporabi za napeljave z vročo in hladno vodo v stavbah za prenos pitne ali nepitne vode (domači sistemi) in za grelne sisteme pod računskimi tlaki in pri temperaturah, primernih za razred uporabe (glej preglednico 1 iz ISO 15877-1:2009). Ta del ISO 15877 zajema razpon pogojev delovanja (razrede uporabe) in razrede računskega tlaka. Za vrednosti TD, Tmax in Tmal, ki so višje od tistih v preglednici 1 iz ISO 15877-1:2009, ta del ISO 15877 ne velja. Prav tako določa parametre za preskusne metode, navedene v tem delu ISO 15877. Skupaj z drugimi deli ISO 15877 velja za PVC-C fitinge, njihove spoje in spoje s komponentami iz PVC-C, druge polimerne materiale in materiale, ki niso polimerni, namenjeni uporabi za napeljave z vročo in hladno vodo. Ta del ISO 15877 velja za fitinge naslednjih vrst: – fitinge za lepljene spoje; – mehanske fitinge; – fitinge z vgrajenimi vstavki.

General Information

Status
Published
Public Enquiry End Date
19-Oct-2009
Publication Date
06-Feb-2011
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
07-Dec-2010
Due Date
11-Feb-2011
Completion Date
07-Feb-2011

Relations

Buy Standard

Amendment
EN ISO 15877-3:2009/oprA1:2009
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Amendment
EN ISO 15877-3:2009/A1:2011
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 15877-3:2009/oprA1:2009
01-september-2009
&HYQLVLVWHPLL]SROLPHUQLKPDWHULDORY]DQDSHOMDYH]YURþRLQKODGQRYRGR
.ORULUDQLSROLYLQLONORULG 39&& GHO)LWLQJL'RSROQLOR ,62
'$0
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl
chloride) (PVC-C) - Part 3: Fittings - Amendment 1 (ISO 15877-3:2009/DAM 1:2009)
Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Chloriertes
Polyvinylchlorid (PVC-C) - Teil 3: Formstücke - Änderung 1 (ISO 15877-3:2009/DAM
1:2009)
Systèmes de canalisations en plastique pour les installations d'eau chaude et froide -
Poly(chlorure de vinyle) chloré (PVC-C) - Partie 3: Raccords - Amendement 1 (ISO
15877-3:2009/DAM 1:2009)
Ta slovenski standard je istoveten z: EN ISO 15877-3:2009/prA1
ICS:
23.040.45 Fitingi iz polimernih Plastics fittings
materialov
91.140.60 Sistemi za oskrbo z vodo Water supply systems
SIST EN ISO 15877-3:2009/oprA1:2009 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 15877-3:2009/oprA1:2009

---------------------- Page: 2 ----------------------

SIST EN ISO 15877-3:2009/oprA1:2009
EUROPEAN STANDARD
DRAFT
EN ISO 15877-3:2009
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
June 2009
ICS 23.040.45; 91.140.60

English Version
Plastics piping systems for hot and cold water installations -
Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings -
Amendment 1 (ISO 15877-3:2009/DAM 1:2009)
Systèmes de canalisations en plastique pour les Kunststoff-Rohrleitungssysteme für die Warm- und
installations d'eau chaude et froide - Poly(chlorure de Kaltwasserinstallation - Chloriertes Polyvinylchlorid (PVC-
vinyle) chloré (PVC-C) - Partie 3: Raccords - Amendement C) - Teil 3: Formstücke - Änderung 1 (ISO 15877-
1 (ISO 15877-3:2009/DAM 1:2009) 3:2009/DAM 1:2009)
This draft amendment is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee CEN/TC 155.
This draft amendment A1, if approved, will modify the European Standard EN ISO 15877-3:2009. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15877-3:2009/prA1:2009: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 15877-3:2009/oprA1:2009
EN ISO 15877-3:2009/prA1:2009 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 15877-3:2009/oprA1:2009
EN ISO 15877-3:2009/prA1:2009 (E)
Foreword
This document (EN ISO 15877-3:2009/prA1:2009) has been prepared by Technical Committee CEN/TC 155
“Plastics piping systems and ducting systems", the secretariat of which is held by NEN, in collaboration with
Technical Committee ISO/TC 138 "Plastics pipes, fittings and valves for the transport of fluids".
This document is currently submitted to the parallel Enquiry.
3

---------------------- Page: 5 ----------------------

SIST EN ISO 15877-3:2009/oprA1:2009

---------------------- Page: 6 ----------------------

SIST EN ISO 15877-3:2009/oprA1:2009
DRAFT AMENDMENT ISO 15877-3:2009/DAmd 1
ISO/TC 138/SC 2 Secretariat: SNV
Voting begins on: Voting terminates on:
2009-06-11 2009-11-11
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Plastics piping systems for hot and cold water installations —
Chlorinated poly(vinyl chloride) (PVC-C) —
Part 3:
Fittings
AMENDMENT 1
Systèmes de canalisations en plastique pour les installations d'eau chaude et froide — Poly(chlorure de vinyle)
chloré (PVC-C) —
Partie 3: Raccords
AMENDEMENT 1
ICS 23.040.45; 91.140.60

ISO/CEN PARALLEL PROCESSING
This draft has been developed within the European Committee for Standardization (CEN), and processed
under the CEN-lead mode of collaboration as defined in the Vienna Agreement.
This draft is hereby submitted to the ISO member bodies and to the CEN member bodies for a parallel
five-month enquiry.
Should this draft be accepted, a final draft, established on the basis of comments received, will be
submitted to a parallel two-month approval vote in ISO and formal vote in CEN.
To expedite distribution, this document is circulated as received from the committee secretariat.
ISO Central Secretariat work of editing and text composition will be undertaken at publication
stage.
Pour accélérer la distribution, le présent document est distribué tel qu'il est parvenu du
secrétariat du comité. Le travail de rédaction et de composition de texte sera effectué au
Secrétariat central de l'ISO au stade de publication.
...

SLOVENSKI STANDARD
SIST EN ISO 15877-3:2009/A1:2011
01-marec-2011
&HYQLVLVWHPLL]SROLPHUQLKPDWHULDORY]DQDSHOMDYH]YURþRLQKODGQRYRGR
.ORULUDQLSROLYLQLONORULG 39&& GHO)LWLQJL'RSROQLOR ,62
$0'
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl
chloride) (PVC-C) - Part 3: Fittings - Amendment 1 (ISO 15877-3:2009/AMD 1:2010)
Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Chloriertes
Polyvinylchlorid (PVC-C) - Teil 3: Formstücke - Änderung 1 (ISO 15877-3:2009/AMD
1:2010)
Systèmes de canalisations en plastique pour les installations d'eau chaude et froide -
Poly(chlorure de vinyle) chloré (PVC-C) - Partie 3: Raccords - Amendement 1 (ISO
15877-3:2009/AMD 1:2010)
Ta slovenski standard je istoveten z: EN ISO 15877-3:2009/A1:2010
ICS:
23.040.45 Fitingi iz polimernih Plastics fittings
materialov
91.140.60 Sistemi za oskrbo z vodo Water supply systems
SIST EN ISO 15877-3:2009/A1:2011 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 15877-3:2009/A1:2011

---------------------- Page: 2 ----------------------

SIST EN ISO 15877-3:2009/A1:2011


EUROPEAN STANDARD
EN ISO 15877-3:2009/A1

NORME EUROPÉENNE

EUROPÄISCHE NORM
November 2010
ICS 23.040.45; 91.140.60
English Version
Plastics piping systems for hot and cold water installations -
Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings -
Amendment 1 (ISO 15877-3:2009/AMD 1:2010)
Systèmes de canalisations en plastique pour les Kunststoff-Rohrleitungssysteme für die Warm- und
installations d'eau chaude et froide - Poly(chlorure de Kaltwasserinstallation - Chloriertes Polyvinylchlorid (PVC-
vinyle) chloré (PVC-C) - Partie 3: Raccords - Amendement C) - Teil 3: Formstücke - Änderung 1 (ISO 15877-
1 (ISO 15877-3:2009/AMD 1:2010) 3:2009/AMD 1:2010)
This amendment A1 modifies the European Standard EN ISO 15877-3:2009; it was approved by CEN on 31 October 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the
official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15877-3:2009/A1:2010: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 15877-3:2009/A1:2011
EN ISO 15877-3:2009/A1:2010 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 15877-3:2009/A1:2011
EN ISO 15877-3:2009/A1:2010 (E)
Foreword
This document (EN ISO 15877-3:2009/A1:2010) has been prepared by Technical Committee CEN/TC 155
“Plastics piping systems and ducting systems” the secretariat of which is held by NEN, in collaboration with
Technical Committee ISO/TC 138 “Plastics pipes, fittings and valves for the transport of fluids”.
This Amendment to the European Standard EN ISO 15877-3:2009 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by May 2011, and
conflicting national standards shall be withdrawn at the latest by May 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 15877-3:2009/A1:2011

---------------------- Page: 6 ----------------------

SIST EN ISO 15877-3:2009/A1:2011

INTERNATIONAL ISO
STANDARD 15877-3
Second edition
2009-03-15
AMENDMENT 1
2010-11-01


Plastics piping systems for hot and cold
water installations — Chlorinated
poly(vinyl chloride) (PVC-C) —
Part 3:
Fittings
AMENDMENT 1
Systèmes de canalisations en plastique pour les installations
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.