iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 60252:1999

(Main)

A.C. motor capacitors

A.C. motor capacitors

Relates to capacitors for the starting and running of asynchronous motors supplied by single-phase systems, such as are widely used in household appliances. Applies to both impregnated and non-impregnated capacitors, with paper or plastic film dielectric, or a combination of the two, either metallized or with metal foil electrodes, for rated voltages not exceeding 660 V. Contains definitions, safety and quality requirements, tests, ratings, application guide.

Motorkondensatoren

Condensateurs des moteurs à courant alternatif

Concerne les conducteurs pour le démarrage et le fonctionnement des moteurs asynchrones alimentés par un réseau monophasé, qui sont largement employés dans les appareils électroménagers. Traite des condensateurs imprégnés ou non, dont le diélectrique est en papier, en film plastique ou en une combinaison des deux, métallisés ou avec des électrodes en feuilles de métal, pour les tensions nominales n'excédant pas 660 V. Contient des définitions, des prescriptions de qualité et de sécurité, des essais, des valeurs nominales et un guide d'application.

A.C. motor capacitors

General Information

Status
Withdrawn
Publication Date
30-Jun-1999
Withdrawal Date
31-Mar-2005
ICS
31.060.70 - Power capacitors
Technical Committee
ETC - Electrotechnical technical committe
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Apr-2005
Due Date
01-Apr-2005
Completion Date
01-Apr-2005
Directive
73/23/EEC - Electrical equipment designed for use within certain voltage limits
Ref Project
EN 60252:1994 - A.C. motor capacitors

Relations

Replaced By
SIST EN 60252-1:2002 - AC motor capacitors -- Part 1: General - Performance, testing and rating - Safety requirements - Guide for installation and operation
Effective Date
06-May-2014
Replaced By
SIST EN 60252-1:2002 - AC motor capacitors -- Part 1: General - Performance, testing and rating - Safety requirements - Guide for installation and operation
Effective Date
29-Jan-2023

Buy Standard

EN 60252:1999EN 60252:1999
PreviousNext
Standard
EN 60252:1999
English language
32 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60252:1999
01-julij-1999
A.C. motor capacitors
A.C. motor capacitors
Motorkondensatoren
Condensateurs des moteurs à courant alternatif
Ta slovenski standard je istoveten z: EN 60252:1994
ICS:
31.060.70 0RþQRVWQLNRQGHQ]DWRUML Power capacitors
SIST EN 60252:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60252:1999

---------------------- Page: 2 ----------------------

SIST EN 60252:1999

---------------------- Page: 3 ----------------------

SIST EN 60252:1999

---------------------- Page: 4 ----------------------

SIST EN 60252:1999

---------------------- Page: 5 ----------------------

SIST EN 60252:1999

---------------------- Page: 6 ----------------------

SIST EN 60252:1999

---------------------- Page: 7 ----------------------

SIST EN 60252:1999

---------------------- Page: 8 ----------------------

SIST EN 60252:1999

---------------------- Page: 9 ----------------------

SIST EN 60252:1999

---------------------- Page: 10 ----------------------

SIST EN 60252:1999

---------------------- Page: 11 ----------------------

SIST EN 60252:1999

---------------------- Page: 12 ----------------------

SIST EN 60252:1999

---------------------- Page: 13 ----------------------

SIST EN 60252:1999

---------------------- Page: 14 ----------------------

SIST EN 60252:1999

---------------------- Page: 15
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 60931-1:1999(Main)
Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 kV -- Part 1: General - Performance, testing and rating - Safety requirements - Guide for installation and operation
EN 60931-1:1996

Applies to non-self-healing capacitor units and capacitor banks intended to be used for power-factor correction of a.c. power systems having a rated voltage up to and including 1000 V and frequencies 15 Hz to 60 Hz. Also applies to capacitors intended for use in power filter circuits.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60931-2:1999(Main)
Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 kV -- Part 2: Ageing test and destruction test
EN 60931-2:1996

Applies to capacitors according to EN 60931-1 and gives the requirements for the ageing test and destruction test for these capacitors. The two ageing test methods are intended to ensure that the capacitor case temperature is maintained constant during the test. The destruction test is performed to evaluate the behaviour of the capacitor at the end of its life.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60110-1:1999(Main)
Power capacitors for induction heating installations -- Part 1: General
EN 60110-1:1998

Is applicable both to indoor capacitor units and indoor capacitor banks intended to be used, particularly, for power factor correction in induction heating, melting, stirring or casting installations, and similar applications with controlled or adjustable a.c. voltage systems in a frequency range up to 50 kHz, and with a rated voltage not exceeding 3,6 kV.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60931-3:1999(Main)
Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 kV -- Part 3: Internal fuses
EN 60931-3:1996

Applies to internal fuses which are designed to isolate faulty capacitor elements or capacitor unit, in order to allow operation of the remaining parts of that capacitor unit and the bank. Such fuses are not a substitute for a switching device such as a circuit-breaker, or for external protection of the capacitor bank.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61270-1:1999(Main)
Capacitors for microwave ovens -- Part 1: General
EN 61270-1:1996

Applies to capacitors for microwave ovens operating at rated a.c. voltages of up to 3 000 V and a superimposed d.c. voltage of up to 1.13 times the value of rated a.c. voltage. Relates specifically to capacitors with a metal case and an upper rated maximum temperature of up to 100 °C, non-self-healing, with metal foil electrodes and dielectrics of paper and/or plastic, impregnated with a suitable oil. This part contains uniform rules regarding performance, testing and rating and specific safety rules.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62146-2:2023(Main)
Capacitors for high‑voltage alternating current circuit‑breakers - Part 2: TRV capacitors (IEC 62146-2:2023)
EN IEC 62146-2:2023

IEC 62146-2:2023 is applicable to TRV capacitors used on high-voltage alternating current circuit-breakers with rated voltages above 100 kV with 50 Hz or 60 Hz.
TRV capacitors are installed phase to earth, either in parallel to the bushing on dead tank circuit-breakers, or immersed inside the circuit-breaker, or freestanding close to the circuit-breaker. Their function is to limit the transient recovery voltage (TRV) and the rate of rise of recovery voltage (RRRV) on the circuit-breaker. Capacitors in compliance with this document can be used as TRV capacitor.
This document applies to TRV capacitors falling into one or both of the following categories for:
- mounting on or close to air insulated switchgear (AIS) dead tank and live tank circuit-breakers, or
- mounting on gas insulated switchgear (GIS) circuit-breakers.
The testing for each of the above applications is in some cases different.
This document does not apply to grading capacitors installed in parallel to the chambers of the circuit-breaker, which are specified in IEC 62146-1.
This document does not apply to capacitors not directly associated with high-voltage alternating current circuit-breakers.
The object of this document is:
- to define uniform rules regarding performances, testing and rating
- to define specific safety rules
- to provide a guidance for installation and operation
The TRV capacitor is a sub-component for the circuit-breaker and is specified in accordance with the circuit-breaker specifications according to IEC 62271-1, IEC 62271-100, and if applicable to IEC 62271-203.
TRV capacitors are commonly built with composite or ceramic housings (insulators). Those insulators follow IEC 61462 or IEC 62155. Other housings can be used if they can sustain applicable type tests according to IEC 61462 and IEC 62155.
This International Standard is to be used in conjunction with IEC 62146-1:2013 and IEC 62146-1:2013/AMD1:2016.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 63210:2021(Main)
Shunt power capacitors of the self-healing type for AC systems having a rated voltage above 1 000 V (IEC 63210:2021)
EN IEC 63210:2021

This document is applicable to both self-healing capacitor units and self-healing capacitor banks
intended to be used, particularly, for power-factor correction of AC power systems having a
rated voltage above 1 000 V and fundamental frequencies of 15 Hz to 60 Hz.
The following capacitors are excluded from this document:
– shunt power capacitors of the self-healing type for AC systems having a rated voltage up to
and including 1 000 V (IEC 60831-1, -2);
– shunt power capacitors of the non-self-healing type for AC systems having a rated voltage
up to and including 1 000 V (IEC 60931-1, -2 and -3);
– shunt capacitors of the non-self-healing type for AC power systems having a rated voltage
above 1 000 V (IEC 60871-1, -2, -3 and -4);
– capacitors for inductive heat-generating plants operating at frequencies between 40 Hz and
24 000 Hz (IEC 60110-1 and -2);
– series capacitors (IEC 60143-1, -2, -3 and -4);
– AC motor capacitors (IEC 60252-1 and -2);
– coupling capacitors and capacitor dividers (IEC 60358-1, -2, -3, -4);
– capacitors for power electronic circuits (IEC 61071);
– small AC capacitors to be used for fluorescent and discharge lamps (IEC 61048 and
IEC 61049);
– capacitors for suppression of radio interference;
– capacitors intended to be used in various types of electrical equipment, and thus considered
as components;
– capacitors intended for use with DC voltage superimposed on the AC voltage.
Requirements for accessories such as insulators, switches, instrument transformers and
external fuses are given in the relevant IEC standards and are not covered by the scope of this
document.
The object of this document is to:
a) formulate uniform rules regarding performances, testing and rating;
b) formulate specific safety rules;
c) provide a guide for installation and operation.

  • Standard
    59 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60143-1:2015/AC:2017(Corrigendum)
Series capacitors for power systems - Part 1: General (IEC 60143-1:2015/COR1:2017)
EN 60143-1:2015/AC:2017-05
  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62146-1:2014/A1:2016(Amendment)
Grading capacitors for high-voltage alternating current circuit-breakers - Part 1: General (IEC 62146-1:2013/A1:2016)
EN 62146-1:2014/A1:2016
  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60143-1:2015(Main)
Series capacitors for power systems - Part 1: General
EN 60143-1:2015

This part of IEC 60143 applies both to capacitor units and capacitor banks intended to be
used connected in series with an a.c. transmission or distribution line or circuit forming part
of an a.c. power system having a frequency of 15 Hz to 60 Hz.
The primary focus of this standard is on transmission application.
The series capacitor units and banks are usually intended for high-voltage power systems.
This standard is applicable to the complete voltage range.
This standard does not apply to capacitors of the self-healing metallized dielectric type.
The following capacitors, even if connected in series with a circuit, are excluded from this
standard:
– capacitors for inductive heat-generating plants (IEC 60110-1);
– capacitors for motor applications and the like (IEC 60252 (all parts));
– capacitors to be used in power electronics circuits (IEC 61071);
– capacitors for discharge lamps (IEC 61048 and IEC 61049).
For standard types of accessories such as insulators, switches, instrument transformers,
external fuses, etc. see the pertinent IEC standard.
NOTE 1 Additional requirements for capacitors to be protected by internal fuses, as well as the requirements for
internal fuses, are found in IEC 60143-3. See also Annex C.
NOTE 2 Additional requirements for capacitors to be protected by external fuses, as well as the requirements for
external fuses, are found in Annex A and Annex C.
NOTE 3 A separate standard for series capacitor accessories (spark-gaps, varistors, discharge reactors, currentlimiting
damping reactors, damping resistors, circuit-breakers, etc.), IEC 60143-2, has been revised and was
completed in 2012. A separate standard for internal fuses for series capacitors, IEC 60143-3 has been revised and
was completed in 2013.
NOTE 4 Some information regarding fuseless capacitor units and fuseless capacitor banks is found in Annex C.
The object of this standard is:
– to formulate uniform rules regarding performance, testing and rating;
– to formulate specific safety rules;
– to serve as a guide for installation and operation.

  • Standard
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day