SIST EN 60130-9:2011

Connectors for frequencies below 3 MHz - Part 9: Circular connectors for radio and associated sound equipment (IEC 60130-9:2011)

This part of IEC 60130 relates to circular connectors for radio and associated sound equipment.

Steckverbinder für Frequenzen unter 3 MHz - Teil 9: Rundsteckverbinder für Rundfunkund verwandte elektroakustische Geräte (IEC 60130-9:2011)

Connecteurs utilisés aux fréquences jusqu'à 3 MHz - Partie 9: Connecteurs circulaires pour appareils de radiodiffusion et équipements électroacoustiques associés (CEI 60130-9:2011)

La CEI 60130-9:2011 concerne des connecteurs circulaires pour appareils de radiodiffusion et équipements électroacoustiques associés. Cette quatrième édition annule et remplace la troisième édition de la CEI 60130-9 publiée en 2000 et constitue une révision technique. La présente édition inclut les modifications techniques significatives suivantes par rapport à l'édition précédente:
- le domaine d'application a été modifié pour clarifier sa séparation d'avec le champ d'application de la CEI 61076-2-106;
- les modèles de connecteurs à 8 contacts, 60130-9 IEC-22 à 60130-9 IEC-25 à vis, ont été supprimés car ils ont été considérés comme obsolètes et comme faisant double emploi avec certains modèles de laCEI 61076-2-106;
- les informations concernant les applications et les raccordements du Tableau 1 ont été supprimées car elles faisaient référence à des équipements électroacoustiques obsolètes. Les titres des fiches dimensionnelles et les titres des articles de l'Annexe A ont été modifiés en consequence;
- la référence aux exigences de sécurité de la CEI 60065 a été supprimée.

Konektorji za frekvence pod 3 MHz - 9. del: Okrogli konektorji za radijsko in pripadajočo zvokovno opremo (IEC 60130-9:2011)

Ta del IEC 60130 se nanaša na okrogle konektorje za radijsko in pripadajočo zvokovno opremo.

General Information

• Status: Published
• Publication Date: 04-May-2011
• ICS: 31.220.10 - Plug-and-socket devices. Connectors
• Technical Committee: I11 - Imaginarni 11
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 05-Apr-2011
• Due Date: 10-Jun-2011
• Completion Date: 05-May-2011
• Ref Project: EN 60130-9:2011 - Connectors for frequencies below 3 MHz - Part 9: Circular connectors for radio and associated sound equipment

Relations

• Replaces: SIST EN 60130-9:2001 - Connectors for frequencies below 3 MHz -- Part 9: Circular connectors for radio and associated sound equipment
• Effective Date: 30-Mar-2014
• Replaces: SIST EN 60130-9:2001 - Connectors for frequencies below 3 MHz -- Part 9: Circular connectors for radio and associated sound equipment
• Effective Date: 29-Jan-2023
• Revised: SIST EN 60130-9:2001 - Connectors for frequencies below 3 MHz -- Part 9: Circular connectors for radio and associated sound equipment
• Effective Date: 01-Apr-2014
• Replaces: SIST EN 60130-9:2001 - Connectors for frequencies below 3 MHz -- Part 9: Circular connectors for radio and associated sound equipment
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60130-9:2011
01-junij-2011
1DGRPHãþD
SIST EN 60130-9:2001
.RQHNWRUML]DIUHNYHQFHSRG0+]GHO2NURJOLNRQHNWRUML]DUDGLMVNRLQ
SULSDGDMRþR]YRNRYQRRSUHPR,(&
Connectors for frequencies below 3 MHz - Part 9: Circular connectors for radio and
associated sound equipment (IEC 60130-9:2011)
Steckverbinder für Frequenzen unter 3 MHz - Teil 9: Rundsteckverbinder für
Rundfunkund verwandte elektroakustische Geräte (IEC 60130-9:2011)
Connecteurs utilisés aux fréquences jusqu'à 3 MHz - Partie 9: Connecteurs circulaires
pour appareils de radiodiffusion et équipements électroacoustiques associés (CEI 60130
-9:2011)
Ta slovenski standard je istoveten z: EN 60130-9:2011
ICS:
31.220.10 9WLþLLQYWLþQLFHNRQHNWRUML Plug-and-socket devices.
Connectors
SIST EN 60130-9:2011 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60130-9:2011

---------------------- Page: 2 ----------------------

SIST EN 60130-9:2011

EUROPEAN STANDARD
EN 60130-9
NORME EUROPÉENNE
April 2011
EUROPÄISCHE NORM

ICS 31.220.10 Supersedes EN 60130-9:2000


English version


Connectors for frequencies below 3 MHz -
Part 9: Circular connectors for radio and associated sound equipment
(IEC 60130-9:2011)


Connecteurs utilisés aux fréquences Steckverbinder für Frequenzen unter
jusqu'à 3 MHz - 3 MHz -
Partie 9: Connecteurs circulaires pour Teil 9: Rundsteckverbinder für Rundfunk-
appareils de radiodiffusion et équipements und verwandte elektroakustische Geräte
électroacoustiques associés (IEC 60130-9:2011)
(CEI 60130-9:2011)




This European Standard was approved by CENELEC on 2011-03-30. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60130-9:2011 E

---------------------- Page: 3 ----------------------

SIST EN 60130-9:2011
EN 60130-9:2011 - 2 -

Foreword
The text of document 48B/2180/CDV, future edition 4 of IEC 60130-9, prepared by SC 48B, Connectors,
of IEC TC 48, Electromechanical components and mechanical structures for electronic equipment, was
submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60130-9 on
2011-03-30.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
This European Standard supersedes EN 60130-9:2000.
EN 60130-9:2011 includes the following significant technical changes with respect to EN 60130-9:2000:
— the scope has been amended to clarify its separation through its field of application, from
EN 61076-2-106;
— 8-pole connector styles 60130-9 IEC-22 through 60130-9 IEC-25 with screw locking have been
deleted as obsolete and overlapping with some styles of EN 61076-2-106;
— application and connections in Table 1 have been deleted because of referencing obsolete sound
equipment. Titles of the dimension sheets and the clause headlines of Annex A have been amended
accordingly;
— the reference to safety requirements according to EN 60065 has been deleted.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2011-12-30
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2014-03-30
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60130-9:2011 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60065 NOTE  Harmonized as EN 60065.
__________

---------------------- Page: 4 ----------------------

SIST EN 60130-9:2011
- 3 - EN 60130-9:2011

Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

IEC 60068-1 1988 Environmental testing - EN 60068-1 1994
+ A1 1992 Part 1: General and guidance


IEC 60512 Series Connectors for electronic equipment - Tests EN 60512 Series
and measurements


IEC 60512-1-1 - Connectors for electronic equipment - Tests EN 60512-1-1 -
and measurements -
Part 1-1: General examination - Test 1a:
Visual examination


IEC 60512-1-2 - Connectors for electronic equipment - Tests EN 60512-1-2 -
and measurements -
Part 1-2: General examination - Test 1b:
Examination of dimension and mass


IEC 60512-2-1 - Connectors for electronic equipment - Tests EN 60512-2-1 -
and measurements -
Part 2-1: Electrical continuity and contact
resistance tests - Test 2a: Contact resistance
- Millivolt level method


IEC 60512-3-1 - Connectors for electronic equipment - Tests EN 60512-3-1 -
and measurements -
Part 3-1: Insulation tests - Test 3a: Insulation
resistance


IEC 60512-4-1 - Connectors for electronic equipment - Tests EN 60512-4-1 -
and measurements -
Part 4-1: Voltage stress tests - Test 4a:
Voltage proof


IEC 60512-7-1 - Connectors for electronic equipment - Tests EN 60512-7-1 -
and measurements -
Part 7-1: Impact tests (free connectors) - Test
7a: Free fall (repeated)


1) 1)
IEC 60512-7-2 - Connectors for electronic equipment - Tests EN 60512-7-2 -
and measurements -
Part 7-2: Impact tests (free connectors) - Test
7b: Mechanical strength impact


IEC 60512-9-1 - Connectors for electronic equipment - Tests EN 60512-9-1 -
and measurements -
Part 9-1: Endurance tests - Test 9a:
Mechanical operation



1)
To be published.

---------------------- Page: 5 ----------------------

SIST EN 60130-9:2011
EN 60130-9:2011 - 4 -
Publication Year Title EN/HD Year
IEC 60512-11-1 - Electromechanical components for electronic EN 60512-11-1 -
equipment - Basic testing procedures and
measuring methods -
Part 11: Climatic tests - Section 1: Test 11a -
Climatic sequence


IEC 60512-11-3 - Connectors for electronic equipment - Tests EN 60512-11-3 -
and measurements -
Part 11-3: Climatic tests - Test 11c: Damp
heat, steady state


IEC 60512-11-9 - Connectors for electronic equipment - Tests EN 60512-11-9 -
and measurements -
Part 11-9: Climatic tests - Test 11i: Dry heat


IEC 60512-11-10 - Connectors for electronic equipment - Tests EN 60512-11-10 -
and measurements -
Part 11-10: Climatic tests - Test 11j: Cold


IEC 60512-11-12 - Connectors for electronic equipment - Tests EN 60512-11-12 -
and measurements -
Part 11-12: Climatic tests - Test 11m: Damp
heat, cyclic


IEC 60512-13-2 - Connectors for electronic equipment - Tests EN 60512-13-2 -
and measurements -
Part 13-2: Mechanical operating tests - Test
13b: Insertion and withdrawal forces


IEC 60512-16-5 - Connectors for electronic equipment - Tests EN 60512-16-5 -
and measurements -
Part 16-5: Mechanical tests on contacts and
terminations - Test 16e: Gauge retention force
(resilient contacts)


IEC 60512-17-1 - Connectors for electronic equipment - Tests EN 60512-17-1 -
and measurements -
Part 17-1: Cable clamping tests - Test 17a:
Cable clamp robustness


1) 1)
IEC 60512-17-2 - Connectors for electronic equipment - Tests EN 60512-17-2 -
and measurements -
Part 17-2: Cable clamping tests - Test 17b:
Cable clamp resistance to cable rotation


IEC 60512-17-3 - Connectors for electronic equipment - Tests EN 60512-17-3 -
and measurements -
Part 17-3: Cable clamping tests - Test 17c:
Cable clamp resistance to cable pull (tensile)


IEC 60512-17-4 - Connectors for electronic equipment - Tests EN 60512-17-4 -
and measurements -
Part 17-4: Cable clamping tests - Test 17d:
Cable clamp resistance to cable torsion


1) 1)
IEC 61076-2-106 - Connectors for electronic equipment - EN 61076-2-106 -
Product requirements -
Part 2-106: Circular connectors - Detail
specification for connectors m 16 x 0,75 with
screw-locking and degree of protection ip40 or
ip65/67


ISO 1302 - Geometrical Product Specifications (GPS) - EN ISO 1302 -
Indication of surface texture in technical
product documentation

---------------------- Page: 6 ----------------------

SIST EN 60130-9:2011
IEC 60130-9
®

Edition 4.0 2011-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE


Connectors for frequencies below 3 MHz –
Part 9: Circular connectors for radio and associated sound equipment

Connecteurs utilisés aux fréquences jusqu'à 3 MHz –
Partie 9: Connecteurs circulaires pour appareils de radiodiffusion et
équipements électroacoustiques associés


INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX XA
ICS 13.220.10 ISBN 978-2-88912-373-5

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------

SIST EN 60130-9:2011
– 2 – 60130-9 © IEC:2011
CONTENTS
FOREWORD . 5
1 Scope . 7
2 Normative references . 7
3 Technical information . 8
3.1 IEC type designation . 8
3.2 Contact arrangements and connections . 10
4 Dimensional information . 10
5 Gauges . 40
5.1 Gauges for checking dimensions . 40
5.2 Gauges for measuring contact resistance . 41
5.3 Gauges for measuring retention force . 41
5.4 Gauge for voltage proof and insulation resistance tests of connectors
60130-9 IEC-08 . 42
5.5 Gauge for voltage proof and contact resistance tests of connectors
60130-9 IEC-08 . 43
6 Characteristics . 44
6.1 Rated values . 44
6.2 Climatic category . 44
7 Schedule for type tests . 44
Annex A (normative) Description of the connectors . 48
Annex B (normative) Measurement of individual contacts (resilient contacts only) . 51
Annex C (informative) Examples of circuitry of connector with switch . 52
Bibliography . 53

Figure 1 – Free connector 60130-9 IEC-01 . 12
Figure 2 – Fixed connector 60130-9 IEC-02 . 13
Figure 3 – Free connector 60130-9 IEC-03 . 14
Figure 4 – Fixed connector 60130-9 IEC-04 . 15
Figure 5 – Free connector 60130-9 IEC-05 . 16
Figure 6 – Fixed connector 60130-9 IEC-06 . 17
Figure 7 – Fixed connector 60130-9 IEC-07 . 18
Figure 8 – Fixed connector 60130-9 IEC-08 . 19
Figure 9 – Free connector 60130-9 IEC-09 . 20
Figure 10 – Free connector 60130-9 IEC-10 . 21
Figure 11 – Fixed connector 60130-9 IEC-11 . 22
Figure 12 – Free connector 60130-9 IEC-12 . 23
Figure 13 – Fixed connector 60130-9 IEC-13 . 24
Figure 14 – Free connector 60130-9 IEC-14 . 25
Figure 15 – Fixed connector 60130-9 IEC-15 . 26
Figure 16 – Fixed connector 60130-9 IEC-15a . 27
Figure 17– Free connector 60130-9 IEC-16 . 28
Figure 18 – Fixed connector 60130-9 IEC-17 . 29
Figure 19 – Free connector 60130-9 IEC-18 . 30

---------------------- Page: 8 ----------------------

SIST EN 60130-9:2011
60130-9 © IEC:2011 – 3 –
Figure 20 – Fixed connector 60130-9 IEC-19 . 31
Figure 21 – Free connector 60130-9 IEC-20 . 32
Figure 22 – Fixed connector 60130-9 IEC-21 . 33
Figure 23 – Fixed connector 60130-9 IEC-26 . 34
Figure 24 – Free connector 60130-9 IEC-27 . 35
Figure 25 – Free connector 60130-9 IEC-28 . 36
Figure 26 – Fixed connector 60130-9 IEC-29 . 37
Figure 27 – Fixed connector 60130-9 IEC-30 . 38
Figure 28 – Free connector 60130-9 IEC-31 . 39
Figure 29 – Gauge for connector types 60130-9 IEC-02, 04, 07, 08, 09, 11, 13, 15, 17,
18, 21 . 40
Figure 30 – Gauge for connector types 60130-9 IEC-07, 08 and 09 . 40
Figure 31 – Gauge for connector types 60130-9 IEC-02, 04, 07, 08, 09, 11, 13, 15, 17,
18, 21 . 41
Figure 32 – Gauge for connector types 60130-9 IEC-07, 08 and 09 . 41
Figure 33 – Gauge for voltage proof and insulation resistance tests of connectors
60130-9 IEC-08 . 42
Figure 34 – Gauge for voltage proof and contact resistance tests of connectors
60130-9 IEC-08 . 43
Figure C.1 – Free connector 60130-9 IEC-05 inserted in position A . 52
Figure C.2 – Free connector 60130-9 IEC-05 inserted in position B . 52

Table 1 – Type designation . 9
Table 2 – Free connector 60130-9 IEC-01 . 12
Table 3 – Fixed connector 60130-9 IEC-02 . 13
Table 4 – Free connector 60130-9 IEC-03 . 14
Table 5 – Fixed connector 60130-9 IEC-04 . 15
Table 6 – Free connector 60130-9 IEC-05 . 16
Table 7 – Fixed connector 60130-9 IEC-06 . 17
Table 8 – Fixed connector 60130-9 IEC-07 . 18
Table 9 – Fixed connector 60130-9 IEC-08 . 19
Table 10 – Free connector 60130-9 IEC-09 . 20
Table 11– Free connector 60130-9 IEC-10 . 21
Table 12 – Fixed connector 60130-9 IEC-11 . 22
Table 13 – Free connector 60130-9 IEC-12 . 23
Table 14 – Fixed connector 60130-9 IEC-13 . 24
Table 15 – Free connector 60130-9 IEC-14 . 25
Table 16 – Fixed connector 60130-9 IEC-15 . 26
Table 17 – Fixed connector 60130-9 IEC-15a . 27
Table 18– Free connector 60130-9 IEC-16 . 28
Table 19 – Fixed connector 60130-9 IEC-17 . 29
Table 20 – Free connector 60130-9 IEC-18 . 30
Table 21 – Fixed connector 60130-9 IEC-19 . 31
Table 22 – Free connector 60130-9 IEC-20 . 32

---------------------- Page: 9 ----------------------

SIST EN 60130-9:2011
– 4 – 60130-9 © IEC:2011
Table 23 – Fixed connector 60130-9 IEC-21 . 33
Table 24 – Fixed connector 60130-9 IEC-26 . 34
Table 25 – Free connector 60130-9 IEC-27 . 35
Table 26 – Free connector 60130-9 IEC-28 . 36
Table 27 – Fixed connector 60130-9 IEC-29 . 37
Table 28 – Fixed connector 60130-9 IEC-30 . 38
Table 29 – Free connector 60130-9 IEC-31 . 39
Table 30 – Dimensions of gauges for checking dimensions . 40
Table 31 – Dimensions of gauges for measuring retention force . 41
Table 32 – Dimensions of gauge for voltage proof and insulation resistance tests of
connectors 60130-9 IEC-08 . 42
Table 33 – Dimensions of gauge for voltage proof and contact resistance tests of
connectors 60130-9 IEC-08 . 43
Table 34 – Climatic category . 44
Table 35 – Test group for all specimens . 44
Table 36 – Test group for the first lot . 45
Table 37 – Test group for the second and third lot . 46
Table 38 – Test group for the fourth lot . 47
Table 39 – Test group for switches in 60130-9 IEC-08 . 47

---------------------- Page: 10 ----------------------

SIST EN 60130-9:2011
60130-9 © IEC:2011 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

CONNECTORS FOR FREQUENCIES BELOW 3 MHz –

Part 9: Circular connectors for radio
and associated sound equipment


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60130-9 has been prepared by subcommittee 48B: Connectors, of
IEC technical committee 48: Electromechanical components and mechanical structures for
electronic equipment.
This fourth edition cancels and replaces the third edition of IEC 60130-9, published in 2000,
and constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous
edition:
• the scope has been amended to clarify its separation through its field of application, from
IEC 61076-2-106;
• 8-pole connector styles 60130-9 IEC-22 through 60130-9 IEC-25 with screw locking have
been deleted as obsolete and overlapping with some styles of IEC 61076-2-106;

---------------------- Page: 11 ----------------------

SIST EN 60130-9:2011
– 6 – 60130-9 © IEC:2011
• application and connections in Table 1 have been deleted because of referencing obsolete
sound equipment. Titles of the dimension sheets and the clause headlines of Annex A
have been amended accordingly;
• the reference to safety requirements according to IEC 60065 has been deleted.
The text of this standard is based on the third edition and on the following documents:
CDV Report on voting
48B/2180/CDV 48B/2222/RVC

Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
A list of all parts of IEC 60130 series, under the general title Connectors for frequencies
below 3 MHz, can be found on the IEC website.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.

---------------------- Page: 12 ----------------------

SIST EN 60130-9:2011
60130-9 © IEC:2011 – 7 –
CONNECTORS FOR FREQUENCIES BELOW 3 MHz –

Part 9: Circular connectors for radio
and associated sound equipment



1 Scope
This part of IEC 60130 relates to circular connectors for radio and associated sound
equipment.
NOTE IEC 61076-2-106 specifies connectors with a similar mating interface for connectors M16x0,75 with screw-
locking and degree of protection IP40 or IP65/IP67 and with M16x0,75 screw-locking accessory. As the
IEC 60130-9 connector styles mating with the corresponding ones of IEC 61076-2-106 do not have a locking
mechanism specified they are therefore not appropriate for industrial process measurement and control equipment.
Users of this IEC 60130-9 standard should be aware that some of the IEC 61076-2-106 styles could be mated but
not locked to some connector styles of this IEC 60130-9
...