SIST EN 3639:2021

Aerospace series - Heat resisting alloy X6NiCrTiMoV26-15 (1.4980) - Softened and cold worked - Wires for forged fasteners - D ≤ 15 mm - 900 MPa ≤ Rm ≤ 1 100 MPa

This document specifies the requirements relating to:
Heat resisting alloy X6NiCrTiMoV26-15 (1.4980)
Softened and cold worked
Wires for forged fasteners
D ≤ 15 mm
900 MPa ≤ Rm ≤ 1 100 MPa
for aerospace applications.
W.nr: 1.4980.
ASD-STAN designation: FE-PA2601.

Luft- und Raumfahrt - Hochwarmfeste Legierung FE-PA2601, weichgeglüht und kaltverfestigt; Draht zum Stauchen für Verbindungselemente D <kleiner => 15 mm, 900 MPa <kleiner => R<(Index)m> <kleiner => 1100 MPa

Dieses Dokument legt die Anforderungen an:
Hochwarmfeste Legierung X6NiCrTiMoV26 15 (1.4980)
Weichgeglüht und kaltverfestigt
Drähte für gestauchte Verbindungselemente
D ≤ 15 mm
900 MPa ≤ Rm ≤ 1 100 MPa
für Anwendungen in der Luft  und Raumfahrt fest.
Werkstoffnummer: 1.4980.
ASD STAN Bezeichnung: FE PA2601.

Série aérospatiale - Alliage résistant à chaud FE-PA2601 - Adouci et écroui - Fils pour éléments de fixation forgés - D ≤ 15 mm - 900 MPa ≤ Rm ≤ 1 100 MPa

Le présent document spécifie les exigences relatives à :
Alliage résistant à chaud FE-PA2601
Adouci et écroui
Fils pour éléments de fixation forgés
D ≤ 15 mm
900 MPa ≤ Rm ≤ 1 100 MPa
pour applications aérospatiales.

Aeronavtika - Toplotno odporna zlitina X6NiCrTiMoV26-15 (1.4980) - Popuščana in hladno obdelana - Žice za kovane vezne elemente - D ≤ 15 mm - 900 MPa ≤ Rm ≤ 1100 MPa

General Information

• Status: Published
• Publication Date: 22-Mar-2021
• ICS: 49.025.05 - Ferrous alloys in general
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 18-Mar-2021
• Due Date: 23-May-2021
• Completion Date: 23-Mar-2021
• Ref Project: EN 3639:2021 - Aerospace series - Heat resisting alloy X6NiCrTiMoV26-15 (1.4980) - Softened and cold worked - Wires for forged fasteners - D ≤ 15 mm - 900 MPa ≤ Rm ≤ 1 100 MPa

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 3639:2021
01-maj-2021
Aeronavtika - Toplotno odporna zlitina X6NiCrTiMoV26-15 (1.4980) - Popuščana in
hladno obdelana - Žice za kovane vezne elemente - D ≤ 15 mm - 900 MPa ≤ Rm ≤
1100 MPa
Aerospace series - Heat resisting alloy X6NiCrTiMoV26-15 (1.4980) - Softened and cold
worked - Wires for forged fasteners - D ≤ 15 mm - 900 MPa ≤ Rm ≤ 1 100 MPa
Luft- und Raumfahrt - Hochwarmfeste Legierung FE-PA2601, weichgeglüht und
kaltverfestigt; Draht zum Stauchen für Verbindungselemente D 15 mm,
900 MPa R<(Index)m> 1100 MPa
Série aérospatiale - Alliage résistant à chaud FE-PA2601 - Adouci et écroui - Fils pour
éléments de fixation forgés - D ≤ 15 mm - 900 MPa ≤ Rm ≤ 1 100 MPa
Ta slovenski standard je istoveten z: EN 3639:2021
ICS:
49.025.05 Železove zlitine na splošno Ferrous alloys in general
SIST EN 3639:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 3639:2021

---------------------- Page: 2 ----------------------
SIST EN 3639:2021


EN 3639
EUROPEAN STANDARD

NORME EUROPÉENNE

March 2021
EUROPÄISCHE NORM
ICS 49.025.05
English Version

Aerospace series - Heat resisting alloy X6NiCrTiMoV26-15
(1.4980) - Softened and cold worked - Wires for forged
fasteners - D ≤ 15 mm - 900 MPa ≤ Rm ≤ 1 100 MPa
Série aérospatiale - Alliage résistant à chaud Luft- und Raumfahrt - Hochwarmfeste Legierung
X6NiCrTiMoV26-15 (1.4980) - Adouci et écroui - Fils X6NiCrTiMoV26-15 (1.4980) - Weichgegluht und
kaltverfestigt - Drähte zum Stauchen fur
pour éléments de fixation forgés - D ≤ 15 mm - 900
Verbindungselemente - D ≤ 15 mm - 900 MPa ≤ Rm ≤ 1
MPa ≤ Rm ≤ 1 100 MPa
100 MPa
This European Standard was approved by CEN on 17 February 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3639:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 3639:2021
EN 3639:2021 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5
Bibliography . 9

2

---------------------- Page: 4 ----------------------
SIST EN 3639:2021
EN 3639:2021 (E)
European foreword
This document (EN 3639:2021) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this
document has received the approval of the National Associations and the Official Services of the
member countries of ASD, prior to its presentation to CEN.
This document shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by September 2021, and conflicting national
...