SIST EN 1301-1:2008
(Main)Aluminium and aluminium alloys - Drawn wire - Part 1: Technical conditions for inspection and delivery
Aluminium and aluminium alloys - Drawn wire - Part 1: Technical conditions for inspection and delivery
This document specifies the technical conditions for inspection and delivery of aluminium and aluminium alloy drawn wire for general engineering applications. It does not apply for aeronautical application.It applies to drawn wires, except for electrical or welding purposes. It does not apply to drawing stock.
Aluminium und Aluminiumlegierungen - Gezogene Drähte - Teil 1: Technische Lieferbedingungen
Dieses Dokument legt die Technischen Lieferbedingungen für gezogene Drähte aus Aluminium und Aluminiumlegierungen für allgemeine Anwendungen fest.
Es gilt nicht für Anwendungen in der Luftfahrt.
Aluminium et alliages d'aluminium - Fil étiré - Partie 1: Conditions techniques de contrôle et de livraison
Ce document spécifie les conditions techniques de contrôle et de livraison du fil étiré en aluminium ou en alliage d'aluminium destiné à des applications mécaniques générales.
Il ne s'applique pas aux applications aéronautiques.
Il s’applique aux fils étirés, à l’exception des fils électriques et de soudage.
Il ne s’applique pas aux fils machine.
Aluminij in aluminijeve zlitine - Vlečena žica - 1. del: Tehnični pogoji za prevzem in dobavo
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.GREDYRAluminium und Aluminiumlegierungen - Gezogene Drähte - Teil 1: Technische LieferbedingungenAluminium et alliages d'aluminium - Fil étiré - Partie 1: Conditions techniques de contrôle et de livraisonAluminium and aluminium alloys - Drawn wire - Part 1: Technical conditions for inspection and delivery77.150.10Aluminijski izdelkiAluminium productsICS:Ta slovenski standard je istoveten z:EN 1301-1:2008SIST EN 1301-1:2008en,fr,de01-november-2008SIST EN 1301-1:2008SLOVENSKI
STANDARDSIST EN 1301-1:19981DGRPHãþD
SIST EN 1301-1:2008
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1301-1September 2008ICS 77.150.10Supersedes EN 1301-1:1997
English VersionAluminium and aluminium alloys - Drawn wire - Part 1: Technicalconditions for inspection and deliveryAluminium et alliages d'aluminium - Fil étiré - Partie 1 :Conditions techniques de contrôle et de livraisonAluminium und Aluminiumlegierungen - Gezogene Drähte -Teil 1: Technische LieferbedingungenThis European Standard was approved by CEN on 16 August 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1301-1:2008: ESIST EN 1301-1:2008
EN 1301-1:2008 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Ordering information.4 5 Requirements.5 5.1 Production and manufacturing processes.5 5.2 Quality control.5 5.3 Chemical composition.5 5.4 Mechanical properties.6 5.5 Freedom from defects.6 5.6 Tolerances on dimensions.6 5.7 Other properties.6 5.8 Temper of delivery.6 6 Test procedure.6 6.1 Sampling.6 6.2 Methods of tests.7 6.3 Retests.8 7 Delivery documents and inspection documents.8 7.1 Certificate of mass and analysis.8 7.2 Inspection certificate.9 8 Marking.9 9 Packaging.9 10 Complaints of non-conformity.9 Bibliography.10
SIST EN 1301-1:2008
EN 1301-1:2008 (E) 3 Foreword This document (EN 1301-1:2008) has been prepared by Technical Committee CEN/TC 132 “Aluminium and aluminium alloys”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2009, and conflicting national standards shall be withdrawn at the latest by March 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. CEN/TC 132 affirms it is its policy that in the case when a patentee refuses to grant licences on standardised standard products under reasonable and not discriminatory conditions, then this product shall be removed from the corresponding standard. This document supersedes EN 1301-1:1997. Within its programme of work, Technical Committee CEN/TC 132 entrusted CEN/TC 132/WG 4 "Wires and drawing stock" to revise EN 1301-1:1997. Besides editorial adjustments in the text and update of normative references the following changes have been made:
Foreword : amended; Clause 2: EN 12258-1:1998 and EN 14361 added; Clause 3: subclauses 3.1 to 3.9 deleted and replaced by reference to EN 12258-1:1998; Clause 6: subclauses 6.1.2 and 6.1.3 modified; Clause 7: completely revised. EN 1301 comprises the following parts under the general title: "Aluminium and aluminium alloys – Drawn wire": Part 1: Technical conditions for inspection and delivery Part 2 : Mechanical properties Part 3 : Tolerances on dimensions According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 1301-1:2008
EN 1301-1:2008 (E) 4 1 Scope This document specifies the technical conditions for inspection and delivery of aluminium and aluminium alloy drawn wire for general engineering applications. It does not apply for aeronautical application. It applies to drawn wires, except for electrical or welding purposes. It does not apply to drawing stock. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 515, Aluminium and aluminium alloys — Wrought products — Temper designations EN 573-3, Aluminium and aluminium alloys — Chemical composition and form of wrought products — Part 3: Chemical composition and form of products EN 1301-2, Aluminium and aluminium alloys — Drawn wire — Part 2: Mechanical properties EN 1301-3, Aluminium and aluminium alloys — Drawn wire — Part 3: Tolerances on dimensions EN 10002-1, Metallic materials — Tensile testing — Part 1: Method of test at ambient temperature EN 10204, Metallic products — Types of inspection documents EN 12258-1:1998, Aluminium and aluminium alloys — Terms and definitions — Part 1: General terms EN 14361, Aluminium and aluminium alloys — Chemical analysis — Sampling from metal melts 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 12258-1:1998 apply. 4 Ordering information The order shall define the product required and shall contain the following information: a) form and type of product: 1) form of the product (round wire, rectangular wire, etc.); 2) designation of the aluminium or aluminium alloy in accordance with EN 573-3; b) temper of the material for delivery (degree of hardness or heat-treatment condition), and, if different, the temper of use in accordance with EN 515; c) number of this European Standard or a specification number or, otherwise, the properties agreed between manu
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.