iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 12965:2004/A1:2005

(Amendment)

Tractors and machinery for agriculture and forestry - Power take-off (PTO) drive shafts and their guards - Safety

Tractors and machinery for agriculture and forestry - Power take-off (PTO) drive shafts and their guards - Safety

This Amendment replaces Table 1 of 4.2 "Universal joint" and fulfils the Note "Dimension c is under study by CEN/TC 144/WG 1" just below Table 1.

Traktoren und Maschinen für die Land- und Forstwirtschaft - Gelenkwellen und ihre Schutzeinrichtungen - Sicherheit

Tracteurs et matériels agricoles et forestiers - Arbres de transmission a cardans de prise de force et leurs protecteurs - Sécurité

Kmetijski in gozdarski stroji – Priključne gredi in njihova zaščita – Varnost

General Information

Status
Withdrawn
Publication Date
28-Feb-2005
Withdrawal Date
19-Oct-2011
ICS
65.060.01 - Agricultural machines and equipment in general
Technical Committee
IMKG - Machinery for agriculture and forestry
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
20-Oct-2011
Due Date
12-Nov-2011
Completion Date
20-Oct-2011
Directive
98/37/EC - Machinery
Mandate
M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
Ref Project
EN 12965:2003/A1:2004 - Tractors and machinery for agriculture and forestry - Power take-off (PTO) drive shafts and their guards - Safety

Relations

Consolidated By
SIST EN 12965:2004+A2:2009 - Tractors and machinery for agriculture and forestry - Power take-off (PTO) drive shafts and their guards - Safety
Effective Date
18-Jan-2023
Consolidated By
SIST EN 12965:2004+A2:2009 - Tractors and machinery for agriculture and forestry - Power take-off (PTO) drive shafts and their guards - Safety
Effective Date
19-Jan-2023
Consolidated By
SIST EN 12965:2004+A2:2009 - Tractors and machinery for agriculture and forestry - Power take-off (PTO) drive shafts and their guards - Safety
Effective Date
01-Dec-2011
Amends
SIST EN 12965:2004 - Tractors and machinery for agriculture and forestry - Power take-off (PTO) drive shafts and their guards - Safety
Effective Date
22-Dec-2008

Buy Standard

EN 12965:2004/A1:2005EN 12965:2004/A1:2005
PreviousNext
Amendment
EN 12965:2004/A1:2005
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 12965:2004/A1:2005
01-marec-2005
.PHWLMVNLLQJR]GDUVNLVWURML±3ULNOMXþQHJUHGLLQQMLKRYD]DãþLWD±9DUQRVW
Tractors and machinery for agriculture and forestry - Power take-off (PTO) drive shafts
and their guards - Safety
Traktoren und Maschinen für die Land- und Forstwirtschaft - Gelenkwellen und ihre
Schutzeinrichtungen - Sicherheit
Tracteurs et matériels agricoles et forestiers - Arbres de transmission a cardans de prise
de force et leurs protecteurs - Sécurité
Ta slovenski standard je istoveten z: EN 12965:2003/A1:2004
ICS:
65.060.01 Kmetijski stroji in oprema na Agricultural machines and
splošno equipment in general
SIST EN 12965:2004/A1:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 12965:2003/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2004
ICS 65.060.01
English version
Tractors and machinery for agriculture and forestry - Power
take-off (PTO) drive shafts and their guards - Safety
Tracteurs et matériels agricoles et forestiers - Arbres de Traktoren und Maschinen für die Land- und Forstwirtschaft
transmission à cardans de prise de force et leurs - Gelenkwellen und ihre Schutzeinrichtungen - Sicherheit
protecteurs - Sécurité
This amendment A1 modifies the European Standard EN 12965:2003; it was approved by CEN on 28 October 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Central Secretariat or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 4254-1:2016/A1:2022(Amendment)
Agricultural machinery - Safety - Part 1: General requirements - Amendment 1 (ISO 4254-1:2013/Amd 1:2021)
EN ISO 4254-1:2015/A1:2021

2021-11-08 JF:via decision BT C204/2021, taken on 2021-11-03, CEN/BT approved  revised Annex ZA of the EN. EN under publication.
2021-02-18 JF: at the meeting held on 2021-02-17 with French Authorities, HAS Consultant and ISO and CEN representatives the LoC assessment at 2nd FV was resolved
2021-02-01 TAN: The ballot is put on hold in ISO. Ballot cancelled in CEN.
2021-01-06 JF: through decision C224/2020, CEN/BT approved the 2nd vote
2020-07-10 JF: CEN and ISO/TCs intend to have a 2nd vote in order to address LoC assessment as the changes are technical. CCMC asked CEN/TC to launch the ballot on 2nd vote.
2020-06-30 JF: CEN/TC Secretariat informed about the need to revise the Annex ZA in order to address the concerns of market surveillance authorites. The Annex ZA is intended to be revised after the publication of ISO standard

  • Amendment
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17344:2020(Main)
Agricultural machinery - Self-propelled agricultural and forestry vehicles - Requirements for braking
EN 17344:2020

This document applies to wheeled and track-laying self-propelled agricultural and forestry vehicles. It specifies the definitions, construction and performance requirements and the means for verification of braking systems on vehicles with a maximum design speed not exceeding 60 km/h.
Following items are excluded from the scope of this standard:
•   Coupling force control
•   Endurance braking systems
•   Anti-Lock Braking Systems and EBS
•   Vacuum braking systems
•   Safety related parts of complex electronic control systems
•   Trailer Braking control systems

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12965:2020(Main)
Tractors and machinery for agriculture and forestry - Power take-off (PTO) drive shafts and their guards - Safety
EN 12965:2019

This European Standard specifies safety requirements and their verification for the design and construction of power take-off (PTO) drive shafts and their guards linking self-propelled machinery (or tractor) to the first fixed bearing of recipient machinery, by describing methods for the elimination or reduction of risks which need specific requirements. This standard concerns only the PTO drive shafts and those guards which are mechanically linked to the PTO drive shaft by at least two bearings.
In addition, it specifies the type of information on safe working practices to be provided by the manufacturer.
This standard does not deal with:
- the guards totally covering, but not mechanically linked to the PTO drive shaft. As these devices are not at present widely established on the market, they should be dealt with in a future revision of this standard;
- the mechanical characteristics of PTO drive shafts, overrun devices and torque limiters;
- general hazards.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 18497:2019(Main)
Agricultural machinery and tractors - Safety of highly automated agricultural machines - Principles for design (ISO 18497:2018)
EN ISO 18497:2018

This part of ISO xxx is applicable to tractors, self-propelled ride-on machines, and mounted / semi-mounted or trailed machines used in agriculture that do not require an onboard operator for primary machine control.
The standard will specify general requirements that relate to the protection and safety of the machine operator, by-standers, and service personnel.
This standard will define requirements that can apply to machine functional safety and the components of highly automated agricultural tractors and machines.
Standards like ISO 10975, ISO 12100 are to be considered.
Excluded:
• New safety symbols required would be directed to TC23/SC14 for consideration.
• ISOBUS technologies are covered by TC23/SC19.
• Wireless communication technologies

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    16 pages
    German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16944:2017(Main)
Agricultural machinery and tractors - Standardized access to repair and maintenance information (RMI) - Requirements
EN 16944:2017

This standard specifies the requirements to be fulfilled by manufacturers of tractors, interchangeable towed equipment and trailers used in agriculture and forestry in order to comply with the obligation to provide non-discriminatory access for independent operators to Repair and Maintenance Information (RMI) and to provide information on On-Board Diagnostic (OBD) systems.
This standard specifies all organisational and technical requirements and means of verification to comply with the EU Regulation 167/2013 and its Delegated Acts with the objectives to allow the fair competition between manufacturers and between operators and to improve the competitiveness and future viability of companies with special regard to Small and Medium sized Enterprises (SME).
This standard is applicable to agricultural and forestry vehicles approved (respectively to be approved) in accordance with the EU Regulation 167/2013.
This standard is not applicable to small series vehicles.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST ISO 11001-1:2016
Agricultural wheeled tractors - Three-point hitch couplers - Part 1: U-frame coupler
ISO 11001-1:2016

This part of ISO 11001 specifies the essential dimensions for the attachment of three-point hitch
implements to agricultural wheeled and track-laying tractors equipped with a three-point free link
hitch according to ISO 730 or ISO 8759-1 and a U-frame hitch coupler.
NOTE In general the dimensions associated with the tractor and implement for use with hitch couplers are
the same as those for the three-point linkage specified in ISO 730 or ISO 8759-1, and those for the clearance zone
specified in ISO 2332.
The three-point hitch coupler systems constitute a special method of implement mounting. The hitch
couplers are an additional component located between the three-point linkage and the implement,
making it possible to hitch and unhitch from the operator’s seat. Due to the special construction and
function of hitch couplers, it can be necessary to vary the length of the upper and lower links indicated
in the referenced standards.
This part of ISO 11001 applies to categories 1, 2N, 2, 3N, 3, 4N, and 4 of agricultural wheeled and tracklaying
tractors as defined in ISO 730 or ISO 8759-1.

  • Standard
    8 pages
    English language
    sale 15% off
  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    9 pages
    French language
    sale 15% off
  • Standard
    9 pages
    French language
    sale 15% off
SIST
SIST ISO 5131:2016
Tractors for agriculture and forestry - Measurement of noise at the operator's position - Survey method
ISO 5131:2015

This International Standard specifies a method for the measuring and reporting of the noise at the
operator(s) position of a tractor used in agriculture and forestry. The measured noise relates only to the
basic machine and applies to tractors with machine-carried operators. The results provide information
to the operator(s) in order to avoid exposing themselves to noise levels that could put their hearing at
risk.
The conditions specified for the operation of the machines during the measurements are defined to
provide a realistic and repeatable assessment of the maximum noise an operator should be subjected
to when operating a machine. The test procedures specified in this International Standard are survey
methods as defined in ISO 12001.

  • Standard
    13 pages
    English language
    sale 15% off
  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    14 pages
    French language
    sale 15% off
SIST
SIST EN ISO 17989-1:2016(Main)
Tractors and machinery for agriculture and forestry - Sustainability - Part 1: Principles (ISO 17989-1:2015)
EN ISO 17989-1:2015

This standard specifies terms, definitions and principles to allow the consideration of all production and product (machinery) related aspects of sustainability with respect to all machines covered by the scope of TC 144. The objective is to provide a common and consistent approach for all TC 144 areas and guidance for the development of product specific standards.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 4254-1:2016(Main)
Agricultural machinery - Safety - Part 1: General requirements (ISO 4254-1:2013)
EN ISO 4254-1:2015

This part of ISO 4254 specifies the safety requirements and the means of their verification for the design
and construction of self-propelled ride-on machines, mounted, semi-mounted and trailed machines used
in agriculture in order to deal with the hazards which are typical for most of the machines. In addition,
it specifies the type of information on safe working practices including information about residual risks
to be provided by the manufacturer.
This document deals with significant hazards, hazardous situations and events, as listed in Annex A,
relevant to this agricultural machinery when used as intended and under the conditions of misuse
foreseeable by the manufacturer during normal operation and service.
This part of ISO 4254 is not applicable to
— agricultural or forestry tractors,
— aircraft and air-cushion vehicles used in agriculture,
— lawn and garden equipment,
— machine-specific components or functions (e.g. working tools and/or processes).
This part of ISO 4254 is not applicable to hazards related to periodic service, machine conversion and
repairs intended to be carried out by professional service personnel, environmental hazards, road safety
(e.g. steering, braking), or to the power take-off (PTO) drive shaft; neither is it applicable to guards of
moving parts for power transmission except for strength requirements for guards and barriers.
This part of ISO 4254 is not applicable to machines which are manufactured before the date of its publication.
Not all of the hazards dealt with by this part of ISO 4254 are necessarily present on a particular machine.
A risk assessment should be carried out by the manufacturer to determine the hazards that are applicable
and any hazards in addition to those dealt with by this part or a relevant machine-specific part. The
requirements of a machine-specific part of ISO 4254 take precedence over the requirements of this part.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 16230-1:2015(Main)
Agricultural machinery and tractors - Safety of higher voltage electrical and electronic components and systems - Part 1: General requirements (ISO 16230-1:2015)
EN ISO 16230-1:2015

This part of ISO 16230 is applicable to tractors and self-propelled ride-on machines, mounted implements,
and towed implements used in agriculture and forestry. This part of ISO 16230 specifies general
requirements that relate to the protection and safety of operators and bystanders on machines with onboard
voltages in the range of 50 V AC to 1000 V AC and 75 V DC to 1500 V DC. This part of ISO 16230
applies to electrical equipment and parts of the electrical equipment on such machines and includes
general requirements related to the protection and safety of operators, bystanders, and first responders.
This part of ISO 16230 deals with significant hazards, hazardous situations, and events, as listed in
Annex A, relevant to this agricultural machinery when used as intended and under the conditions of
misuse foreseeable by the manufacturer during normal operation and service.
This part of ISO 16230 is not applicable to the following:
— specific design elements of external interfaces (e.g. the interface between a tractor and implement);
— externally powered equipment (e.g. line powered equipment, equipment without on-board
power generation);
— purpose built forestry machines;
— stationary electrical generators.
This part of ISO 16230 is not applicable to machines which are manufactured before the date of its
publication.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day