SIST EN 3431:2008

Aerospace series - Nuts, hexagonal, self-locking, with counterbore and captive washer, in heat resisting steel, silver plated - Classification: 1 100 MPa (at ambient temperature) / 425 °C

This standard specifies the characteristics of self-locking hexagonal nuts, with counterbore and captive washer, in heat resisting steel, silver plated.
Classification: 1 100 MPa  ) / 425 °C  ).

Luft- und Raumfahrt - Sechskantmuttern, selbstsichernd, mit zylindrischer Aussenkung und Bördelscheibe, aus hochwarmfestem Stahl, versilbert - Klasse: 1 100 MPa (bei Raumtemperatur) / 425 °C

Diese Norm legt die Eigenschaften von selbstsichernden Sechskantmuttern mit zylindrischer Aussenkung und Bördelscheibe, aus hochwarmfestem Stahl, versilbert, fest.
Klasse: 1 100 MPa )/425 °C )

Série aérospatiale - Écrous hexagonaux, à freinage interne, avec chambrage et rondelle captive, en acier résistant à chaud, argentés - Classification : 1 100 MPa (à température ambiante) / 425 °C

Aeronavtika - Matice, šestrobe, samozapiralne, z ugreznjeno in robljeno podložko, iz toplotnoodpornega jekla, posrebrene - Klasifikacija: 1 100 MPa (pri temperaturi okolice) / 425 °C

General Information

• Status: Published
• Publication Date: 21-Jan-2008
• ICS: 49.030.30 - Nuts
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 08-Jan-2008
• Due Date: 14-Mar-2008
• Completion Date: 22-Jan-2008
• Ref Project: EN 3431:2007 - Aerospace series - Nuts, hexagonal, self-locking, with counterbore and captive washer, in heat resisting steel, silver plated - Classification: 1 100 MPa (at ambient temperature) / 425 °C

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Nuts, hexagonal, self-locking, with counterbore and captive washer, in heat resisting steel, silver plated - Classification: 1 100 MPa (at ambient temperature) / 425 °CAeronavtika - Matice, šestrobe, samozapiralne, z ugreznjeno in robljeno podložko, iz toplotnoodpornega jekla, posrebrene - Klasifikacija: 1 100 MPa (pri temperaturi okolice) / 425 °CSérie aérospatiale - Écrous hexagonaux, à freinage interne, avec chambrage et rondelle captive, en acier résistant à chaud, argentés - Classification : 1 100 MPa (à température ambiante) / 425 °CLuft- und Raumfahrt - Sechskantmuttern, selbstsichernd, mit zylindrischer Aussenkung und Bördelscheibe, aus hochwarmfestem Stahl, versilbert - Klasse: 1 100 MPa (bei Raumtemperatur) / 425 °CTa slovenski standard je istoveten z:EN 3431:2007SIST EN 3431:2008en49.030.30ICS:SLOVENSKI
STANDARDSIST EN 3431:200801-marec-2008







EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3431
December 2007 ICS 49.030.30 English Version
Aerospace series - Nuts, hexagonal, self-locking, with counterbore and captive washer, in heat resisting steel, silver plated - Classification: 1 100 MPa (at ambient temperature) / 425 °C
Série aérospatiale - Écrous hexagonaux, à freinage interne, avec chambrage et rondelle captive, en acier résistant à chaud, argentés - Classification : 1 100 MPa (à température ambiante) / 425 °C
Luft- und Raumfahrt - Sechskantmuttern, selbstsichernd, mit zylindrischer Aussenkung und Bördelscheibe, aus hochwarmfestem Stahl, versilbert - Klasse: 1 100 MPa (bei Raumtemperatur) / 425 °C This European Standard was approved by CEN on 5 November 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2007 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3431:2007: E



EN 3431:2007 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Required characteristics.5 4 Designation.7 5 Marking.7 6 Technical specification.7



EN 3431:2007 (E) 3 Foreword This document (EN 3431:2007) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2008, and conflicting national standards shall be withdrawn at the latest by June 2008. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
...