Aerospace series - Elements of electrical and optical connection - Test methods - Part 212: Surface transfer impedance

This Standard specifies methods for measuring the surface transfer impedance and shielding effectiveness up to 1 GHz of a connector, or a connector fitted with an accessory and terminated with a cable. The purpose of the test is to ensure that the complete assembly shall have a continuous 360° shielding capability throughout its length.
This test is based on EN 60512-23-3.

Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüverfahren - Teil 212: Oberflächentransferimpedanz

Dieses Dokument legt Verfahren zum Messen der Oberflächenübertragungsimpedanz und Schirmwirkung bis 1 GHz eines Steckverbinders oder eines Steckverbinders mit Zubehör und Leitungsbestückung fest. Zweck dieser Prüfung ist sicherzustellen, dass die vollständige Leitung auf ihrer gesamten Länge eine gleich bleibende Schirmwirkung von 360° aufweist.
Diese Prüfung basiert auf EN 60512 23 3.

Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 212 : Impédance de transfert de surface

Aeronavtika – Elementi električnih in optičnih povezav – Preskusne metode – 212. del: Površinska transferna impedanca

General Information

Status
Published
Publication Date
30-Jun-2006
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Jul-2006
Due Date
01-Jul-2006
Completion Date
01-Jul-2006

Buy Standard

Standard
EN 2591-212:2006
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Elements of electrical and optical connection - Test methods - Part 212: Surface transfer impedanceSérie aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 212 : Impédance de transfert de surfaceLuft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüverfahren - Teil 212: OberflächentransferimpedanzTa slovenski standard je istoveten z:EN 2591-212:2005SIST EN 2591-212:2006en49.060ICS:SLOVENSKI
STANDARDSIST EN 2591-212:200601-julij-2006







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 2591-212October 2005ICS 49.060 English VersionAerospace series - Elements of electrical and optical connection- Test methods - Part 212: Surface transfer impedanceSérie aérospatiale - Organes de connexion électrique etoptique - Méthodes d'essais - Partie 212 : Impédance detransfert de surfaceLuft- und Raumfahrt - Elektrische und optischeVerbindungselemente - Prüverfahren - Teil 212:OberflächentransferimpedanzThis European Standard was approved by CEN on 19 September 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2005 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 2591-212:2005: E



EN 2591-212:2005 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Preparation of specimens.4 4 Apparatus.4 5 Procedure.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.