SIST EN 846-13:2002

Methods of test for ancillary components for masonry - Part 13: Determination of resistance to impact, abrasion and corrosion of organic coatings

This European Standard specifies a method for determining the level of performance of those organic coatings classified in prEN 845-1 and prEN 845-2 as type 2 applied as a protective system to zinc coated steel plate used in the fabrication of ancillary components for masonry.

Prüfverfahren für Ergänzungsbauteile für Mauerwerk - Teil 13: Bestimmung der Schlagfestigkeit, des Abriebwiderstands und der Korrosionsbeständigkeit von organischen Beschichtungen

Anwendungsbereich
Diese Europäische Norm legt ein Verfahren zur Bestimmung des Leistungsvermögens von jenen organischen Schutzschichten fest, die in prEN 845-1 und prEN 845-2 als Typ 2 eingestuft sind und als Schutzsystem für verzinkte Stahlplatten dienen, die bei der Fertigung von Ergänzungsbauteilen für Mauerwerk verwendet werden.

Méthodes d'essai pour composants accessoires de maçonnerie - Partie 13: Détermination de la résistance a l'impact, a l'abrasion et a la corrosion des protections organiques

La présente Norme européenne spécifie une méthode de détermination du niveau de performance des revetements de protection organiques qui sont classés dans le prEN 845-1 et le prEN 845-2 en tant que type 2 et appliqués en tant que systeme de protection sur une plaque en acier galvanisé utilisée dans la fabrication de composants accessoires de maçonnerie.

Metode preskušanja dodatnih komponent zidovine - 13. del: Določevanje odpornosti organskih oblog/prevlek proti udaru, obrabi in koroziji

General Information

• Status: Published
• Publication Date: 31-Mar-2002
• ICS: 91.080.30 - Masonry
• Technical Committee: CAA - Mineral binders and masonry
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Apr-2002
• Due Date: 01-Apr-2002
• Completion Date: 01-Apr-2002
• Directive: 89/106/EEC - Construction products
• Mandate: M/BC/CEN/87/12 - Standardization request in the field of Construction products - masonry
• Ref Project: EN 846-13:2001 - Methods of test for ancillary components for masonry - Part 13: Determination of resistance to impact, abrasion and corrosion of organic coatings

Relations

• Splited From: oSIST prEN 845-1:2010 - Specification for ancillary components for masonry - Part 1: Wall ties, tension straps, hangers and brackets
• Effective Date: 08-Mar-2023
• Splited From: oSIST prEN 845-2:2010 - Specification for ancillary components for masonry - Part 2: Lintels
• Effective Date: 08-Mar-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 846-13:2002
01-april-2002
0HWRGHSUHVNXãDQMDGRGDWQLKNRPSRQHQW]LGRYLQHGHO'RORþHYDQMH
RGSRUQRVWLRUJDQVNLKREORJSUHYOHNSURWLXGDUXREUDELLQNRUR]LML
Methods of test for ancillary components for masonry - Part 13: Determination of
resistance to impact, abrasion and corrosion of organic coatings
Prüfverfahren für Ergänzungsbauteile für Mauerwerk - Teil 13: Bestimmung der
Schlagfestigkeit, des Abriebwiderstands und der Korrosionsbeständigkeit von
organischen Beschichtungen
Méthodes d'essai pour composants accessoires de maçonnerie - Partie 13:
Détermination de la résistance a l'impact, a l'abrasion et a la corrosion des protections
organiques
Ta slovenski standard je istoveten z: EN 846-13:2001
ICS:
91.080.30 Zidane konstrukcije Masonry
SIST EN 846-13:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 846-13:2002

---------------------- Page: 2 ----------------------

SIST EN 846-13:2002
EUROPEAN STANDARD
EN 846-13
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2001
ICS 91.080.30
English version
Methods of test for ancillary components for masonry - Part 13:
Determination of resistance to impact, abrasion and corrosion of
organic coatings
Méthodes d'essai pour composants accessoires de Prüfverfahren für Ergänzungsbauteile für Mauerwerk - Teil
maçonnerie - Partie 13: Détermination de la résistance à 13: Bestimmung der Schlagfestigkeit, des
l'impact, à l'abrasion et à la corrosion des protections Abriebwiderstands und der Korrosionsbeständigkeit von
organiques organischen Beschichtungen
This European Standard was approved by CEN on 23 June 2001.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 846-13:2001 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 846-13:2002
EN 846-13:2001 (E)
Contents
Page
Foreword 3
1 Scope 4
2 Normative references 4
3 Principle 4
4 Sampling 4
5 Apparatus 5
6 Determination of impact resistance 9
7 Determination of abrasion resistance 10
8 Accelerated corrosion test 11
9 Test report 13
2

---------------------- Page: 4 ----------------------

SIST EN 846-13:2002
EN 846-13:2001 (E)
Foreword
This European Standard has been prepared by Technical Committee CEN/TC 125 "Masonry",
the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by February 2002, and conflicting national standards
shall be withdrawn at the latest by February 2002.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Czech
Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg,
Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.
3

---------------------- Page: 5 ----------------------

SIST EN 846-13:2002
EN 846-13:2001 (E)
1 Scope
This European Standard specifies a method for determining the level of performance of those
organic coatings classified in prEN 845-1 and prEN 845-2 as type 2 applied as a protective
system to zinc coated steel plate used in the fabrication of ancillary components for masonry.
2 Normative references
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text, and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of
any of these publications apply to this European Standard only when incorporated in it by
amendment or revision. For undated references the latest edition of the publication referred to
applies (including amendments).
EN 197-1 Cement - Part 1: Composition, specifications and conformity criteria for
common cements.
1
BS 871:1981 Specification for abrasive paper and cloths.
3 Principle
The performance of organic coatings is determined from tests for impact resistance, abrasion
resistance and an accelerated corrosion test. The impact and abrasion resistance are
determined using a heavy rigid pendulum apparatus whereby the spring loaded tip of the
pendulum strikes the test specimen at a specified distance from bottom dead centre. The
accelerated corrosion performance is determined from the electrical resistance of the organic
coating during a period of exposure to an alkaline solution.
4 Sampling
4.1 Sampling for impact and abrasion tests
The minimum number of specimens for each test shall be six, plus two further specimens, if
required (see 6.2). Test specimens shall be flat plate not less than 300 mm long x 50 mm wide
either:
- cut from a sample of the product, where practicable, or
- purpose made and protected using a process identical to that used to protect the
product.
Where specimens are to be cut from a product, they shall be spaced not less than 300 mm
apart.
NOTE  It is critical to use flat plate since any undulations in the metal will cause local high or low spots.

1
published by the British Standards Institution, 389 Chiswick High Rd., London W4 4AL.
4

---------------------- Page: 6 ----------------------

SIST EN 846-13:2002
EN 846-13:2001 (E)
4.2 Sampling for accelerated corrosion test
The minimum number of specimens shall be three, see 8.1.1. Test specimens shall be flat plate
chosen to suit the test cell dimensions (see Figure 3) but shall preferably be not less than 250
mm long x 100 mm wide either:
- cut from a sample of the product, where practicable, or
- cut from galvanized steel plate to the specification used to produce the product.
Where specimens are to be cut from a product, they shall be spaced not less than 300 mm
apart.
5 Apparatus
5.1 Tolerances
The permissible deviation on masses of the apparatus shall be ± 10 g and on apparatus
dimensions ± 1%.
5.2 Impact and abrasion tests apparatus
5.2.1 Steel pendulum
5.2.2 A typical steel pendulum is shown in Figure 1. Its mass acting at centre of action is 8,71
kg. The pendulum tip for the impact test is 0,5 mm thick and 3 mm wide and made from
hardened carbon steel. The form of the tip used is shown in Figure 2. This is attached to the
pendulum such as to produce a 3 mm wide impact strip (i.e. with the flat dimension
perpendicular to the swing direction of the pendulum).
5.2.3 The pendulum tip used for the abrasion test is of hemi-cylindrical profile, radius
12,5 mm and length 12 mm, and made from hardened carbon steel. The tip is covered with first
quality blue twill emery cloth conforming to the requirements of grade No. 1 of BS 871:1981.
NOTE  At present there is no European Standard or International standard which covers the type and
grade of the emery cloth used with the pendulum apparatus. Accordingly, it has been agreed to refer to
British Standard 871).
5

--------------
...