SIST EN 61314-1-1:2007

Fibre optic fan-outs -- Part 1-1: Blank detail specification

This blank detail specification is not, by itself, a specification. It is part of the generic specification IEC 61314-1 (QC 880000) It includes: - a blank worksheet with instructions for preparing detail specifications.

Lichtwellenleiteraufteiler - Teil 1-1: Vordruck für Bauartspezifikation

Système d'éclatement pour fibres optiques -- Partie 1-1: Spécification particulière cadre

Cette spécification particulière cadre n'est pas, en soi, une spécification. Elle fait partie de la spécification générique CEI 61314-1 (QC 880000). Elle comprend: un modèle cadre avec les instructions pour préparer les spécifications particulières.

Izhodne zmogljivosti optičnih vlaken – 1-1. del: Okvirna podrobna specifikacija (IEC 61314-1-1:2006)

General Information

• Status: Withdrawn
• Publication Date: 16-Jul-2007
• Withdrawal Date: 14-Feb-2012
• ICS: 33.180.10 - Fibres and cables
• Technical Committee: iTEL - Communication cables
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 15-Feb-2012
• Due Date: 09-Mar-2012
• Completion Date: 15-Feb-2012
• Ref Project: EN 61314-1-1:2006 - Fibre optic fan-outs - Part 1-1: Blank detail specification

Relations

• Revised: SIST EN 61314-1-1:2012 - Fibre optic interconnecting devices and passive components - Fibre optic fan-outs - Part 1-1: Blank detail specification (IEC 61314-1-1:2011)
• Effective Date: 25-Dec-2012
• Replaced By: SIST EN 61314-1-1:2012 - Fibre optic interconnecting devices and passive components - Fibre optic fan-outs - Part 1-1: Blank detail specification (IEC 61314-1-1:2011)
• Effective Date: 29-Jan-2023
• Replaced By: SIST EN 61314-1-1:2012 - Fibre optic interconnecting devices and passive components - Fibre optic fan-outs - Part 1-1: Blank detail specification (IEC 61314-1-1:2011)
• Effective Date: 07-Jun-2022
• Replaced By: SIST EN 61314-1-1:2012 - Fibre optic interconnecting devices and passive components - Fibre optic fan-outs - Part 1-1: Blank detail specification (IEC 61314-1-1:2011)
• Effective Date: 01-Apr-2012

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61314-1-1:2007
01-september-2007
,]KRGQH]PRJOMLYRVWLRSWLþQLKYODNHQ±GHO2NYLUQDSRGUREQDVSHFLILNDFLMD
,(&
Fibre optic fan-outs -- Part 1-1: Blank detail specification (IEC 61314-1-1:2006)
Lichtwellenleiteraufteiler - Teil 1-1: Vordruck für Bauartspezifikation (IEC 61314-1-
1:2006)
Systeme d'éclatement pour fibres optiques -- Partie 1-1: Spécification particuliere cadre
(IEC 61314-1-1:2006)
Ta slovenski standard je istoveten z: EN 61314-1-1:2006
ICS:
33.180.10 2SWLþQDYODNQDLQNDEOL Fibres and cables
SIST EN 61314-1-1:2007 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 61314-1-1

NORME EUROPÉENNE
November 2006
EUROPÄISCHE NORM

ICS 33.180.10


English version


Fibre optic fan-outs
Part 1-1: Blank detail specification
(IEC 61314-1-1:2006)


Système d'éclatement  Lichtwellenleiteraufteiler
pour fibres optiques Teil 1-1: Vordruck für Bauartspezifikation
Partie 1-1: Spécification particulière cadre (IEC 61314-1-1:2006)
(CEI 61314-1-1:2006)




This European Standard was approved by CENELEC on 2006-10-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61314-1-1:2006 E

---------------------- Page: 2 ----------------------

EN 61314-1-1:2006 - 2 -
Foreword
The text of document 86B/2320/FDIS, future edition 2 of IEC 61314-1-1, prepared by SC 86B, Fibre optic
interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61314-1-1 on 2006-10-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2007-07-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-10-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61314-1-1:2006 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 61300 NOTE  Harmonized as EN 61300 (series) (not modified).
__________

---------------------- Page: 3 ----------------------

- 3 - EN 61314-1-1:2006
Annex ZA

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

1) 2)
IEC 60874-1 - Connectors for optical fibres and cables EN 60874-1 1999
Part 1: Generic specification


1) 2)
IEC 61314-1 - Fibre optic fan-outs EN 61314-1 2005
Part 1: Generic specification




1)
Undated reference.
2)
Valid edition at date of issue.

---------------------- Page: 4 ----------------------

NORME CEI
INTERNATIONALE
IEC



61314-1-1
INTERNATIONAL


Deuxième édition
STANDARD

Second edition

2006-08


Systèmes d'éclatement pour fibres optiques –
Partie 1-1:
Spécification particulière cadre

Fibre optic fan-outs –
Part 1-1:
Blank detail specification

 IEC 2006 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
CODE PRIX
N
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

---------------------- Page: 5 ----------------------

61314-1-1  IEC:2006 – 3 –
CONTENTS
FOREWORD.5

1 Scope.9
2 Normative references.9
3 Qualification inspection.9
3.1 Procedure.9
3.2 Inspection schedule and performance requirements .9
4 Quality conformance inspection .9
4.1 Lot-by-lot inspection .9
4.2 Periodic inspection .9
5 Detail specification worksheet .11

Bibliography .27

---------------------- Page: 6 ----------------------

61314-1-1  IEC:2006 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
_____________
FIBRE OPTIC FAN-OUTS –

Part 1-1: Blank detail specification


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61314-1-1 has been prepared by subcommittee 86B: Fibre optic
interconnecting devices and passive components, of IEC technical committee 86: Fibre optics.
This second edition cancels and replaces the first edition published in 1996, of which it
constitutes a technical revision. The specific technical change from the previous edition of the
document is the deletion of the environmental categories from the whole standard.

---------------------- Page: 7 ----------------------

61314-1-1  IEC:2006 – 7 –
The text of this standard is based on the following documents:
FDIS Report on voting
86B/2320/FDIS 86B/2375/RVD

Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
The QC number that appears on the front cover of this publication is the specification number
in the IEC Quality Assessment System for Electronic Components (IECQ).
A list of all parts of IEC 61314 series, under the general title Fibre optic fan-outs, can be found
on the IEC website.
The committee has decided that the contents of this publication will remain unchanged until the
maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.

---------------------- Page: 8 ----------------------

61314-1-1  IEC:2006 – 9 –
FIBRE OPTIC FAN-OUTS –

Part 1-1: Blank detail specification



1 Scope
This blank detail specification is not, by itself, a specification. It is part of the generic
specification IEC 61314-1 (QC 880000)
It includes:
– a blank worksheet with instructions for preparing detail specifications.
2 Normative references
The following referenced documents are indispensable for the application of this document. For
dated references, only the edition cited applies. For undated references, the latest edition of
the referenced document (including any amendments) applies.
IEC 60874-1, Connectors for optical fibres and cables – Generic specification
IEC 61314-1, Fibre optic fan-outs – Part 1: Generic specification
3 Qualification inspection
3.1 Procedure
The detail specification shall state the qualification approval procedure to be used (see 5.3 of
IEC 61314-1).
3.2 Inspection schedule and performance requirements
The mandatory test schedules for qualification by the fixed sample pro
...