Fibre optic interconnecting devices and passive components - Fibre optic fan-outs - Part 1-1: Blank detail specification

IEC 61314-1-1:2011 This blank detail specification is not, by itself, a specification. It is part of the generic specification IEC 61314-1, Fibre optic interconnecting devices and passive components - Fibre optic fanouts Part - 1: Generic specification. It includes: - A blank worksheet with instructions for preparing detail specifications. This third edition cancels and replaces the second edition published in 2005, of which it constitutes a technical revision. The specific technical change from the previous edition of the document is to reconsider quality approval and quality conformance inspection and to add the mechanical and optical interface standards into the detail specification worksheet.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Lichtwellenleiteraufteiler - Teil 1-1: Vordruck für Bauartspezifikation

Dispositifs d'interconnexion et composants passifs à fibres optiques - Systèmes d'éclatement pour fibres optiques - Partie 1-1: Spécification particulière cadre

La CEI 61314-1-1:2011 Cette spécification particulière cadre n'est pas, en soi, une spécification. Elle fait partie de la spécification générique CEI 61314-1, Dispositifs d'interconnexion et composants passifs à fibres optiques - Systèmes d'éclatement pour fibres optiques - Partie 1: Spécification générique. Elle comprend: - Un modèle cadre avec les instructions pour préparer les spécifications particulières. Cette troisième édition annule et remplace la deuxième édition, publiée en 2005, dont elle constitue une révision technique. Les changements techniques spécifiques par rapport à l'édition précédente de ce document consistent en la révision de la procédure d'homologation et du contrôle de conformité de la qualité, et l'addition des normes d'interface mécanique et optique dans le modèle de spécification particulière.

Povezovalne naprave in pasivne komponente optičnih vlaken - Izhodne zmogljivosti optičnih vlaken - 1-1. del: Okvirna podrobna specifikacija (IEC 61314-1-1:2011)

Ta okvirna podrobna specifikacija sama po sebi ni specifikacija. Predstavlja del rodovne specifikacije IEC 61314-1, Povezovalne naprave in pasivne komponente optičnih vlaken – Izhodne zmogljivosti optičnih vlaken – 1. del: Rodovna specifikacija. Specifikacija zajema: – okviren delovni list z navodili za pripravo podrobnih specifikacij.

General Information

Status
Withdrawn
Publication Date
09-Feb-2012
Withdrawal Date
21-Dec-2012
Current Stage

Relations

Buy Standard

Standard
EN 61314-1-1:2012
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-april-2012
1DGRPHãþD
SIST EN 61314-1-1:2007
3RYH]RYDOQHQDSUDYHLQSDVLYQHNRPSRQHQWHRSWLþQLKYODNHQ,]KRGQH
]PRJOMLYRVWLRSWLþQLKYODNHQGHO2NYLUQDSRGUREQDVSHFLILNDFLMD ,(&

Fibre optic interconnecting devices and passive components - Fibre optic fan-outs - Part
1-1: Blank detail specification (IEC 61314-1-1:2011)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Lichtwellenleiteraufteiler -
Teil 1-1: Vordruck für Bauartspezifikation (IEC 61314-1-1:2011)
Dispositifs d'interconnexion et composants passifs à fibres optiques - Système
d'éclatement pour fibres optiques - Partie 1-1: Spécification particulière cadre (CEI
61314-1-1:2011)
Ta slovenski standard je istoveten z: EN 61314-1-1:2012
ICS:
33.180.10 2SWLþQD YODNQDLQNDEOL Fibres and cables
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 61314-1-1
NORME EUROPÉENNE
February 2012
EUROPÄISCHE NORM
ICS 33.180.20 Supersedes EN 61314-1-1:2006

English version
Fibre optic interconnecting devices and passive components -
Fibre optic fan-outs -
Part 1-1: Blank detail specification
(IEC 61314-1-1:2011)
Dispositifs d'interconnexion et composants Lichtwellenleiter -
passifs à fibres optiques - Verbindungselemente und passive
Systèmes d'éclatement pour fibres Bauteile -
optiques - Lichtwellenleiteraufteiler -
Partie 1-1: Spécification particulière cadre Teil 1-1: Vordruck für Bauartspezifikation
(CEI 61314-1-1:2011) (IEC 61314-1-1:2011)

This European Standard was approved by CENELEC on 2011-12-22. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61314-1-1:2012 E
Foreword
The text of document 86B/3271/FDIS, future edition 3 of IEC 61314-1-1, prepared by SC 86B, "Fibre optic
interconnecting devices and passive components", of IEC/TC 86, "Fibre optics" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 61314-1-1:2012.

The following dates are fixed:
(dop) 2012-09-22
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2012-12-22

standards conflicting with the
document have to be withdrawn
This document supersedes EN 61314-1-1:2006.
The specific technical change from EN 61314-1-1:2006 is to reconsider quality approval and quality
conformance inspection and to add the mechanical and optical interface standards into the detail
specification worksheet.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 61314-1-1:2011 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61073 series NOTE  Harmonized in EN 61073 series.
IEC 61300 series NOTE  Harmonized in EN 61300 series.

- 3 - EN 61314-1-1:2012
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 60874-1 2006 Connectors for optical fibres and cables - EN 60874-1 2007
Part 1: Generic specification
IEC 61314-1 2009 Fibre optic interconnecting devices and EN 61314-1 2009
passive components - Fibre optic fan-outs -
Part 1: Generic specification
IEC 61314-1-1 ®
Edition 3.0 2011-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fibre optic interconnecting devices and passive components – Fibre optic
fan-outs –
Part 1-1: Blank detail specification

Dispositifs d'interconnexion et composants passifs à fibres optiques –
Systèmes d’éclatement pour fibres optiques –
Partie 1-1: Spécification particulière cadre
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX M
ICS 33.180.20 ISBN 978-2-88912-757-3

– 2 – 61314-1-1  IEC:2011
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Qualification inspection . 5
3.1 Procedure . 5
3.2 Test schedule and performance requirements . 5
4 Quality conformance inspection . 5
4.1 Lot-by-lot and periodic procedure . 5
4.2 Lot-by-lot inspection . 6
4.3 Periodic inspection . 6
5 Detail specification worksheet . 6
Bibliography . 12

Table 1 – Fixed sample inspection schedule for qualification approval [15] . 9
Table 2 – Lot-by-lot quality conformance inspection schedule Groups A and B [16] . 10
Table 3 – Periodic quality conformance inspection schedule Groups C and D [17] . 10
Table 4 – Details, measurements and performance requirements [18] . 11

61314-1-1  IEC:2011 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC INTERCONNECTING
DEVICES AND PASSIVE COMPONENTS –
FIBRE OPTIC FAN-OUTS –
Part 1-1: Blank detail specification

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61314-1-1 has been prepared by subcommittee 86B: Fibre optic
interconnecting devices and passive components, of IEC technical committee 86: Fibre optics.
This third edition cancels and replaces the second edition published in 2005, of which it
constitutes a technical revision. The specific technical change from the previous edition of the
document is to reconsider quality approval and quality conformance inspection and to add the
mechanical and optical interface standards into the detail specification worksheet.

– 4 – 61314-1-1  IEC:2011
The text of this standard is based on the following documents:
FDIS Report on voting
86B/3271/FDIS 86B/3301/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts of IEC 61314 series under the general title Fibre optic interconnecting
devices and passive components – Fibre optic fan-outs, can be found on the IEC website.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
61314-1-1  IEC:2011 – 5 –
FIBRE OPTIC INTERCONNECTING
DEVICES AND PASSIVE COMPONENTS –
FIBRE OPTIC FAN-OUTS –
Part 1-1: Blank detail specification

1 Scope
This blank detail specification is not, by itself, a specification. It is part of the generic
specification IEC 61314-1, Fibre optic interconnecting devices and passive components –
Fibre optic fanouts – Part 1: Generic specification.
It includes:
– a blank worksheet with instructions for preparing detail specifications.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and
are indispensable for its application. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any
amendments) applies.
IEC 60874-1:2006, Connectors for optical fibres and cables – Generic specification
IEC 61314-1:2009, Fibre optic interconnecting devices and passive components – Fibre optic
fan-outs – Part 1: Generic specification
3 Qualificat
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.