SIST EN 755-9:2002

Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9: Profiles, tolerances on dimensions and form

This part of EN 755 specifies the tolerances on dimensions and form for aluminium and aluminium alloy extruded profile with a cross section contained within a circumscribing circle not greater than 800 mm. This standard applies to extruded profile for general engineering applications only. The tolerances in this standard only apply to those dimensions that can be physically measured.

Aluminium und Aluminiumlegierungen - Stranggepresste Stangen, Rohre und Profile - Teil 9: Profile, Grenzabmaße und Formtoleranzen

Dieser Teil von EN 755 legt die Grenzabmaße und Formtoleranzen für stranggepreßte Profile aus Aluminium und Aluminiumlegierungen fest, deren Querschnitt in einem Umschlingungskreis mit einem Durchmesser von maximal 800 mm enthalten ist. Diese Norm gilt nur für stranggepreßte Profile für allgemeine Anwendungen. Die Grenzabmaße in dieser Norm gelten nur für die Maße, die wirklich gemessen werden können.ANMERKUNG  Einige in der vorliegenden Norm aufgeführte Produkte können Gegenstand von einem Patent oder Patentanmeldungen sein.

Aluminium et alliages d'aluminium - Barres, tubes et profilés filés - Partie 9: Profilés, tolérances sur dimension et forme

Domaine d'application
La présente partie de la norme EN 755 spécifie les tolérances de dimensions et de forme de profilés en aluminium et alliages d'aluminium étirés dont la section est contenue dans un cercle circonscrit de 800 mm maximum.
Cette norme s'applique seulement aux profilés filés pour application générale.
Les tolérances dans cette norme ne s'appliquent qu'aux dimensions qui peuvent etre réellement mesurées.

Aluminij in aluminijeve zlitine - Iztiskana okrogla palica/pravokotna palica, iztiskane cevi in profili - 9. del: Profili, odstopki mer in tolerance oblike

General Information

• Status: Withdrawn
• Publication Date: 31-Jan-2002
• Withdrawal Date: 06-Apr-2008
• ICS: 77.150.10 - Aluminium products
• Technical Committee: INEK - Nonferrous metals
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 28-Mar-2008
• Due Date: 20-Apr-2008
• Completion Date: 07-Apr-2008
• Ref Project: EN 755-9:2001 - Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9: Profiles, tolerances on dimensions and form

Relations

• Replaced By: SIST EN 755-9:2008 - Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9: Profiles, tolerances on dimensions and form
• Effective Date: 01-May-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 755-9:2002
01-februar-2002
Aluminij in aluminijeve zlitine - Iztiskana okrogla palica/pravokotna palica,
iztiskane cevi in profili - 9. del: Profili, odstopki mer in tolerance oblike
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9: Profiles,
tolerances on dimensions and form
Aluminium und Aluminiumlegierungen - Stranggepresste Stangen, Rohre und Profile -
Teil 9: Profile, Grenzabmaße und Formtoleranzen
Aluminium et alliages d'aluminium - Barres, tubes et profilés filés - Partie 9: Profilés,
tolérances sur dimension et forme
Ta slovenski standard je istoveten z: EN 755-9:2001
ICS:
77.150.10 Aluminijski izdelki Aluminium products
SIST EN 755-9:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 755-9:2002

---------------------- Page: 2 ----------------------

SIST EN 755-9:2002
EUROPEAN STANDARD
EN 755-9
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2001
ICS 77.150.10
English version
Aluminium and aluminium alloys - Extruded rod/bar, tube and
profiles - Part 9: Profiles, tolerances on dimensions and form
Aluminium et alliages d'aluminium - Barres, tubes et Aluminium und Aluminiumlegierungen - Stranggepresste
profilés filés - Partie 9: Profilés, tolérances sur dimension et Stangen, Rohre und Profile - Teil 9: Profile, Grenzabmaße
forme und Formtoleranzen
This European Standard was approved by CEN on 18 February 2001.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 755-9:2001 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 755-9:2002
Page 2
EN 755-9:2001
Contents
Foreword.3
1 Scope .4
2 Alloy groups .4
3 Tolerances on dimensions.5
3.1 Cross-sectional dimensions.5
3.2 Length .12
3.3 Squareness of cut ends .12
4 Tolerances on form.12
4.1 General.12
4.2 Straightness .12
4.3 Convexity - Concavity .13
4.4 Contour .14
4.5 Twist.15
4.6 Angularity .17
4.7 Corner and fillet radii.18

---------------------- Page: 4 ----------------------

SIST EN 755-9:2002
Page 3
EN 755-9:2001
Foreword
This European Standard has been prepared by Technical Committee CEN/TC 132 "Aluminium and aluminium
alloys", the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by October 2001, and conflicting national standards shall be withdrawn at the latest
by October 2001.
Within its programme of work, Technical Committee CEN/TC 132 entrusted CEN/TC 132/WG 5 "Extruded and
drawn products" to prepare the following standard :
EN 755-9, Aluminium and aluminium alloys- Extruded rod/bar, tube and profiles - Part 9 : Profiles, tolerances on
dimensions and form.
This standard is part of a set of nine standards. The other standards deal with :
EN 755-1, Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 1 : Technical conditions for
inspection and delivery.
EN 755-2, Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2 : Mechanical properties.
EN 755-3, Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 3 : Round bars, tolerances
on dimensions and form.
EN 755-4, Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 4 : Square bars, tolerances
on dimensions and form.
EN 755-5, Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 5 : Rectangular bars,
tolerances on dimensions and form.
EN 755-6, Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 6 : Hexagonal bars,
tolerances on dimensions and form.
EN 755-7, Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 7 : Seamless tubes,
tolerances on dimensions and form.
EN 755-8, Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 8 : Porthole tubes,
tolerances on dimensions and form.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,
France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden,
Switzerland and the United Kingdom.

---------------------- Page: 5 ----------------------

SIST EN 755-9:2002
Page 4
EN 755-9:2001
1 Scope
This part of EN 755 specifies the tolerances on dimensions and form for aluminium and aluminium alloy extruded
profile with a cross section contained within a circumscribing circle not greater than 800 mm (see Figure 1).
This standard applies to extruded profiles for general engineering applications only.
The tolerances in this standard only apply to those dimensions that can be physically measured.
NOTE Some of the products listed in the present standard can be subject to patent or patent applications, and their listing
herein does not in any way imply the granting of a licence under such patent right.
CEN/TC 132 affirms it is its policy that in the case when a patentee refuses to grant licences on standardised standard products
under reasonable and not discriminatory conditions, then this product shall be removed from the corresponding standard.
Dimensions in millimetres
Figure 1 — Circumscribing circle
2 Alloy groups
For the purpose of this European Standard, the alloys are distributed into two groups which correspond to varying
degrees of difficulty when manufacturing the products.
The division into group I and group II of the most commonly used general engineering alloys is specified in table 1.
Grouping of other alloys is subject to agreement between purchaser and supplier.

---------------------- Page: 6 ----------------------

SIST EN 755-9:2002
Page 5
EN 755-9:2001
Table 1 — Alloy groups
Group I EN AW-1050A, EN AW-1070A, EN AW-1200, EN AW-1350
EN AW-3003, EN AW-3103
EN AW-5005, EN AW-5005A
EN AW-6101A, EN AW-6101B, EN AW-6005, EN AW-6005A, EN AW-6106,
EN AW 6008, EN AW-6060, EN AW-6063, EN AW-6063A, EN AW-6463
Group II EN AW-2007, EN AW-2011, EN AW-2011A, EN AW-2014, EN AW-2014A,
EN AW-2017A, EN AW-2024, EN AW-2030
a
EN AW-5019 , EN AW-5051A, EN AW-5251, EN AW-5052, EN AW-5154A,
EN AW-5454, EN AW-5754, EN AW-5083, EN AW-5086
EN AW-6012, EN AW-6018, EN AW-6351, EN AW-6061,
EN AW-6261, EN AW-6262, EN AW-6081, EN AW-6082
EN AW-7003, EN AW-7005, EN AW-7020, EN AW-7022, EN AW-7049A,
EN AW-7075
a
EN AW-5019 is the new designation for EN AW-5056A.
3 Tolerances on dimensions
3.1 Cross-sectional dimensions
3.1.1 General
The tolerances on the dimensions listed below (see Figure 2) are specified in the relevant Tables 2 to 8.
A : wall thicknesses except those enclosing the hollow spaces in hollow profiles ;
B : wall thicknesses enclosing the hollow spaces in hollow profiles except those between two hollow spaces ;
C : wall thicknesses between two hollow spaces in hollow profiles ;
E : the length of the shorter leg of profiles with open ends ;
H : all dimensions except wall thickness.

---------------------- Page: 7 ----------------------

SIST EN 755-9:2002
Page 6
EN 755-9:2001
Figure 2 — Definition of dimensions A, B, C, E, H
3.1.2 Tolerances on dimensions other than wall thickness
The tolerances on dimensions shall be as specified in Tables 2 and 3. For profiles with open ends (see Figures 3, 4
and the relevant examples) the tolerances specified in Table 4 shall be added to those of Tables 2 and 3 for
dimension H across open ended legs in order to obtain the tolerances on the gap between any opposite points on
these ends.

---------------------- Page: 8 ----------------------

SIST EN 755-9:2002
Page 7
EN 755-9:2001
Table 2 — Tolerances on cross-sectional dimensions of solid and hollow profiles - Alloy group I
Dimensions in millimetres
a b
Dimension H
Tolerances on H for circumscribing circle CD
Over Up to and 100 < CD 200 < CD 300 < CD 500 < CD
CD
100
including
200
300
500
800
- 10 ± 0,25 ± 0,30 ± 0,35 ± 0,40 ± 0,50
10 25 ± 0,30 ± 0,40 ± 0,50 ± 0,60 ± 0,70
25 50 ± 0,50 ± 0,60 ± 0,80 ± 0,90 ± 1,0
50 100 ± 0,70 ± 0,90 ± 1,1 ± 1,3 ± 1,5
100 150 - ± 1,1 ± 1,3 ± 1,5 ± 1,7
150 200 - ± 1,3 ± 1,5 ± 1,8 ± 2,0
200 300 - - ± 1,7 ± 2,1 ± 2,4
300 450 - - - ± 2,8 ± 3,0
450 600 - - - ± 3,8 ± 4,2
600 800 - - - - ± 5,0
a
These tolerances do not apply to tempers O and Tx510. For these tempers, the tolerances shall be subject to
agreement between the supplier and the purchaser.
b
For profiles with open ends, see Figures 3 and 4, the tolerances for H in the area of the open ends shall be
increased by the values specified in Table 4.
Table 3 — Tolerances on cross-sectional dimensions of solid and hollow profiles - Alloy group II
Dimensions in millimetres
a b
Dimension H
Tolerances on H for circumscribing circle CD
Over Up to and 100 < 200 < 300 < 500 <
CD
100 CD CD CD CD
including

200
300
500
800
- 10 ± 0,40 ± 0,50 ± 0,55 ± 0,60 ± 0,70
10 25 ± 0,50 ± 0,70 ± 0,80 ± 0,90 ± 1,1
25 50 ± 0,80 ± 0,90 ± 1,0 ± 1,2 ± 1,3
50 100 ± 1,0 ± 1,2 ± 1,3 ± 1,6 ± 1,8
100 150 - ± 1,5 ± 1,7 ± 1,8 ± 2,0
150 200 - ± 1,9 ± 2,2 ± 2,4 ± 2,7
200 300 - - ± 2,5 ± 2,8 ± 3,1
300 450 - - - ± 3,5 ± 3,8
450 600 - - - ± 4,5 ± 5,0
600 800 - - - - ± 6,0
a
These tolerances do not apply to tempers O and Tx510. For these tempers, the tolerances shall be subject to
agreement between the supplier and the purchaser.
b
For profiles with open ends, see Figures 3
...