iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

oSIST prEN ISO 14723:2024

(Main)

Oil and gas industries including lower carbon energy - Pipeline transportation systems - Subsea pipeline valves (ISO/DIS 14723:2024)

Oil and gas industries including lower carbon energy - Pipeline transportation systems - Subsea pipeline valves (ISO/DIS 14723:2024)

ISO 14723:2009 specifies requirements and gives recommendations for the design, manufacturing, testing and documentation of ball, check, gate and plug valves for subsea application in offshore pipeline systems meeting the requirements of ISO 13623 for the petroleum and natural gas industries.
ISO 14723:2009 is not applicable to valves for pressure ratings exceeding PN 420 (Class 2500).

Öl- und Gasindustrie einschließlich kohlenstoffarmer Energieträger - Rohrleitungstransportsysteme - Unterwasserarmaturen (ISO/DIS 14723:2024)

Naftna in plinska industrija, vključno z nizkoogljično energijo - Transportni cevovodni sistemi - Armature podvodnih cevovodov (ISO/DIS 14723:2024)

General Information

Status
Not Published
Public Enquiry End Date
30-Jul-2024
ICS
23.060.01 - Valves in general
75.200 - Petroleum products and natural gas handling equipment
Technical Committee
I13 - Imaginarni 13
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
10-Jun-2024
Due Date
28-Oct-2024
Ref Project
prEN ISO 14723 - Oil and gas industries including lower carbon energy - Pipeline transportation systems - Subsea pipeline valves (ISO/DIS 14723:2024)

Relations

Revises
SIST EN ISO 14723:2009 - Petroleum and natural gas industries - Pipeline transportation systems - Subsea pipeline valves (ISO 14723:2009)
Effective Date
08-Apr-2024

Buy Standard

prEN ISO 14723:2024prEN ISO 14723:2024
PreviousNext
Draft
prEN ISO 14723:2024
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 14723:2024
01-julij-2024
Naftna in plinska industrija, vključno z nizkoogljično energijo - Transportni
cevovodni sistemi - Armature podvodnih cevovodov (ISO/DIS 14723:2024)
Oil and gas industries including lower carbon energy - Pipeline transportation systems -
Subsea pipeline valves (ISO/DIS 14723:2024)
Öl- und Gasindustrie einschließlich kohlenstoffarmer Energieträger -
Rohrleitungstransportsysteme - Unterwasserarmaturen (ISO/DIS 14723:2024)
Ta slovenski standard je istoveten z: prEN ISO 14723
ICS:
23.060.01 Ventili na splošno Valves in general
75.200 Oprema za skladiščenje Petroleum products and
nafte, naftnih proizvodov in natural gas handling
zemeljskega plina equipment
oSIST prEN ISO 14723:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 14723:2024

---------------------- Page: 2 ----------------------
oSIST prEN ISO 14723:2024
DRAFT
International
Standard
ISO/DIS 14723
ISO/TC 67/SC 2
Oil and gas industries including
Secretariat: UNI
lower carbon energy — Pipeline
Voting begins on:
transportation systems — Subsea
2024-06-06
pipeline valves
Voting terminates on:
ICS: ISO ics
2024-08-29
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO/DIS 14723:2024(en)
© ISO 2024

---------------------- Page: 3 ----------------------
oSIST prEN ISO 14723:2024
DRAFT
ISO/DIS 14723:2024(en)
International
Standard
ISO/DIS 14723
ISO/TC 67/SC 2
Oil and gas industries including
Secretariat: UNI
lower carbon energy — Pipeline
Voting begins on:
transportation systems — Subsea
pipeline valves
Voting terminates on:
ICS: ISO ics
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2024
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: +41 22 749 01 11
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/DIS 14723:2024(en)
© ISO 2024

© ISO 2024 – All rights reserved
ii

---------------------- Page: 4 ----------------------
oSIST prEN ISO 14723:2024
ISO/DIS 14723:2024(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 14723:2009(Main)
Petroleum and natural gas industries - Pipeline transportation systems - Subsea pipeline valves (ISO 14723:2009)
EN ISO 14723:2009

This International Standard specifies requirements and gives recommendations for the design, manufacturing, testing and documentation of ball, check, gate and plug valves for subsea application in offshore pipeline systems meeting the requirements of ISO 13623 for the petroleum and natural gas industries. This International Standard is not applicable to valves for pressure ratings exceeding PN 420 (Class 2500).

  • Standard
    81 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    89 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13942:2009/AC:2009(Corrigendum)
Petroleum and natural gas industries - Pipeline transportation systems - Pipeline valves (ISO 14313:2007 modified/Cor 1:2009)
EN 13942:2009/AC:2009

ISO - Taking over of an ISO Technical Corrigendum in an ISO modified EN

  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13942:2009(Main)
Petroleum and natural gas industries - Pipeline transportation systems - Pipeline valves (ISO 14313:2007 modified)
EN 13942:2009

This International Standard specifies requirements and provides recommendations for the design, manufacturing, testing and documentation of ball, check, gate and plug valves for application in pipeline systems meeting the requirements of ISO 13623 for the petroleum and natural gas industries.
This International Standard is not applicable to subsea pipeline valves, as they are covered by a separate International Standard (ISO 14723).
This International Standard is not applicable to valves for pressure ratings exceeding PN 420 (Class 2 500).
On-land supply systems used by the gas supply industry are excluded from the scope of this standard.

  • Standard
    81 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13774:2014(Main)
Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements
EN 13774:2013

This European Standard deals with metal isolating valves used for gas distribution systems with maximum operating pressure up to 16 bar, and which operate with fuel gases of the first, the second and the third family, in accordance with EN 437. The types of isolating valves to be considered are: plug and ball valves, gate valves, globe valves and butterfly valves. This standard does not apply to: - valves for domestic installations; - safety type pressure relief valves; - wellhead valves. In the case of power operated valves, the requirements for the power source are not covered by this European Standard. The valves covered in this European Standard operate in the following classes of temperature: - - 10 °C to 60 °C; - - 20 °C to 60 °C; - the range is stated by the purchaser for special design. This European Standard gives additional requirements to the relevant products standards. (See Annex B.) In case of contradictions between the standards mentioned in Annex B and this European Standard, EN 13774 prevails.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14141:2013(Main)
Valves for natural gas transportation in pipelines - Performance requirements and tests
EN 14141:2013

This European Standard applies to all valves (plug, ball, gate and check valves) used in onshore transmission pipelines for transport of natural gas in accordance with EN 1594, but with a differing temperature range according to the following three classes in accordance with EN 682: 1) - 10 °C to 60 °C; 2) - 20 °C to 60 °C; 3) the range stated by the purchaser for special design. This European Standard comprises all valves which are components of the pipeline. This European Standard specifies valves for pipelines with a maximum operating pressure (MOP) over 16 bar. Control valves and safety valves are excluded from the scope of this European Standard. This European Standard specifies requirements and appropriate verification tests carried out during production and for certification purposes to verify that the valves conform to the requirements. A summary of the product and type tests is given in Annex G. This European Standard makes reference to EN 13942. All the requirements of EN 13942 should be met unless otherwise stated. Paragraphs marked with a dot [•] indicate requirements which are identical to EN 13942. Additional national requirements and tests in accordance with individual national legal regulations not yet harmonised may be necessary and are to be advised in the purchase order.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 14723:2009(Main)
Petroleum and natural gas industries - Pipeline transportation systems - Subsea pipeline valves (ISO 14723:2009)
EN ISO 14723:2009

This International Standard specifies requirements and gives recommendations for the design, manufacturing, testing and documentation of ball, check, gate and plug valves for subsea application in offshore pipeline systems meeting the requirements of ISO 13623 for the petroleum and natural gas industries. This International Standard is not applicable to valves for pressure ratings exceeding PN 420 (Class 2500).

  • Standard
    81 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    89 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13942:2009/AC:2009(Corrigendum)
Petroleum and natural gas industries - Pipeline transportation systems - Pipeline valves (ISO 14313:2007 modified/Cor 1:2009)
EN 13942:2009/AC:2009

ISO - Taking over of an ISO Technical Corrigendum in an ISO modified EN

  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13942:2009(Main)
Petroleum and natural gas industries - Pipeline transportation systems - Pipeline valves (ISO 14313:2007 modified)
EN 13942:2009

This International Standard specifies requirements and provides recommendations for the design, manufacturing, testing and documentation of ball, check, gate and plug valves for application in pipeline systems meeting the requirements of ISO 13623 for the petroleum and natural gas industries.
This International Standard is not applicable to subsea pipeline valves, as they are covered by a separate International Standard (ISO 14723).
This International Standard is not applicable to valves for pressure ratings exceeding PN 420 (Class 2 500).
On-land supply systems used by the gas supply industry are excluded from the scope of this standard.

  • Standard
    81 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14325:2018+A1:2024(Main + Amendment)
Protective clothing against chemicals - Test methods and performance classification of chemical protective clothing materials, seams, joins and assemblages
EN 14325:2018+A1:2024

This European Standard specifies the performance classification and test methods for materials used in chemical protective clothing, including gloves and footwear. The gloves and boots should have the same chemical protective barrier requirements as the fabric when an integral part of the clothing. This is a reference standard to which chemical protective clothing performance standards may refer in whole or in part, but this standard is not exhaustive in the sense that product standards may well require testing according to test method standards which are not included in this standard.
While these performance levels are intended to relate to the usage to which the chemical protective clothing is to be put, it is essential that the chemical protective clothing manufacturer or supplier indicate the intended use of the protective clothing and that the user (specifier) carries out a risk assessment in order to establish the correct performance level for the intended task.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61755-3-2:2024(Main)
Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 3-2: Connector parameters of dispersion unshifted single-mode physically contacting fibres - angled 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrules (IEC 61755-3-2:2024)
EN IEC 61755-3-2:2024

IEC 61755-3-2:2024 defines the dimensional limits of the optical interface that are necessary for single-mode fibre optic connectors with 2,5 mm or 1,25 mm diameter cylindrical zirconia (ZrO2) ferrules polished at an 8° angle to meet the specific requirements for fibre-to-fibre interconnection, as defined in IEC 61755-2-2. Ferrules made from the material specified in this standard are suitable for use in all the operating service environments defined in IEC 61753-1. Ferrule dimensions and features are contained in the IEC 61754 series of fibre optic connector interface standards. This second edition cancels and replaces the first edition published in 2006. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) normative references have been added;
b) The introduction of an additional optical interface with a different fibre core eccentricity profile. The previous revision of optical interface standard is named "Variant 1: with fibre core axis oriented towards the connector guide key".
The additional optical interface is named "Variant 2: with fibre core axis not oriented towards the connector guide key";
c) statements added related to interoperability, where both variants remain intermateable within a given performance grade and are fully backwards compatible to IEC 61755-3-2:2006;
d) The addition of Grade B and Grade C interface requirements for both variants;
f) The addition of a descriptive statistic for the mean fibre core eccentricity (mean value) to describe the distribution of fibre core eccentricity to ensure interoperability;
g) A new informative Annex B to give guidance on the expected attenuation when mated to a reference connector plug;
h) A new informative Annex D to give guidance related to estimation of mean fibre eccentricity limits for finite production batch sizes.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day