SIST EN ISO 14919:2024
(Main)Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification and technical supply conditions (ISO 14919:2023)
Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification and technical supply conditions (ISO 14919:2023)
ISO 14919:2015 specifies requirements for classification of metal and non-metal wires (solid and cored), rods, cords processed by means of thermal spraying, especially by arc and flame spraying.
Thermisches Spritzen - Drähte, Stäbe und Schnüre zum Flammspritzen und Lichtbogenspritzen - Einteilung - Technische Lieferbedingungen (ISO 14919:2023)
Dieses Dokument legt die Anforderungen an die Einteilung von metallischen und nichtmetallischen Drähten (Massivdraht und Fülldraht), Stäben und Schnüren, die durch die Verfahren des thermischen Spritzens, insbesondere durch Flamm- und Lichtbogenspritzen, verarbeitet werden, fest.
Projection thermique - Fils, baguettes et cordons pour projection thermique à l'arc et au pistolet dans une flamme - Classification et conditions techniques d'approvisionnement (ISO 14919:2023)
L'ISO 14919:2015 spécifie les exigences en matière de classification des fils métalliques et non métalliques (pleins et fourrés), des baguettes, des cordons traités par projection thermique, notamment les procédés à l'arc et dans la flamme.
Vroče brizganje - Žice, palice in vrvi za plamensko in obločno brizganje - Klasifikacija in tehnični dobavni pogoji (ISO 14919:2023)
Standard ISO 14919:2015 določa zahteve za klasifikacijo kovinskih in nekovinskih žic (masivnih in strženskih žic), palic in vrvi, obdelanih z vročim brizganjem, zlasti z obločnim in plamenskim brizganjem.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 14919:2024
01-januar-2024
Vroče brizganje - Žice, palice in vrvi za plamensko in obločno brizganje -
Klasifikacija in tehnični dobavni pogoji (ISO 14919:2023)
Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification and
technical supply conditions (ISO 14919:2023)
Thermisches Spritzen - Drähte, Stäbe und Schnüre zum Flammspritzen und
Lichtbogenspritzen - Einteilung - Technische Lieferbedingungen (ISO 14919:2023)
Projection thermique - Fils, baguettes et cordons pour projection thermique à l'arc et au
pistolet dans une flamme - Classification et conditions techniques d'approvisionnement
(ISO 14919:2023)
Ta slovenski standard je istoveten z: EN ISO 14919:2023
ICS:
25.220.20 Površinska obdelava Surface treatment
SIST EN ISO 14919:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 14919:2024
---------------------- Page: 2 ----------------------
SIST EN ISO 14919:2024
EN ISO 14919
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2023
EUROPÄISCHE NORM
ICS 25.220.20 Supersedes EN ISO 14919:2015
English Version
Thermal spraying - Wires, rods and cords for flame and arc
spraying - Classification and technical supply conditions
(ISO 14919:2023)
Projection thermique - Fils, baguettes et cordons pour Thermisches Spritzen - Drähte, Stäbe und Schnüre zum
projection thermique à l'arc et au pistolet dans une Flammspritzen und Lichtbogenspritzen - Einteilung -
flamme - Classification et conditions techniques Technische Lieferbedingungen (ISO 14919:2023)
d'approvisionnement (ISO 14919:2023)
This European Standard was approved by CEN on 5 November 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14919:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 14919:2024
EN ISO 14919:2023 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 14919:2024
EN ISO 14919:2023 (E)
European foreword
This document (EN ISO 14919:2023) has been prepared by Technical Committee ISO/TC 107 "Metallic
and other inorganic coatings" in collaboration with Technical Committee CEN/TC 240 “Thermal
spraying and thermally sprayed coatings” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2024, and conflicting national standards shall be
withdrawn at the latest by May 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 14919:2015.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Mac
...
SLOVENSKI STANDARD
oSIST prEN ISO 14919:2023
01-marec-2023
Nadomešča:
SIST EN ISO 14919:2015
Vroče brizganje - Žice, palice in vrvi za plamensko in obločno brizganje -
Klasifikacija - Tehnični dobavni pogoji (ISO/DIS 14919:2023)
Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification -
Technical supply conditions (ISO/DIS 14919:2023)
Thermisches Spritzen - Drähte, Stäbe und Schnüre zum Flammspritzen und
Lichtbogenspritzen - Einteilung - Technische Lieferbedingungen (ISO/DIS 14919:2023)
Projection thermique - Fils, baguettes et cordons pour projection thermique à l'arc et au
pistolet dans une flamme - Classification - Conditions techniques d'approvisionnement
(ISO/DIS 14919:2023)
Ta slovenski standard je istoveten z: prEN ISO 14919
ICS:
25.220.20 Površinska obdelava Surface treatment
oSIST prEN ISO 14919:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 14919:2023
---------------------- Page: 2 ----------------------
oSIST prEN ISO 14919:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 14919
ISO/TC 107 Secretariat: KATS
Voting begins on: Voting terminates on:
2023-01-17 2023-04-11
Thermal spraying — Wires, rods and cords for flame
and arc spraying — Classification — Technical supply
conditions
Projection thermique — Fils, baguettes et cordons pour projection thermique à l'arc et au pistolet dans une
flamme — Classification — Conditions techniques d'approvisionnement
ICS: 25.220.20
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 14919:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023
---------------------- Page: 3 ----------------------
oSIST prEN ISO 14919:2023
ISO/DIS 14919:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 14919
ISO/TC 107 Secretariat: KATS
Voting begins on: Voting terminates on:
Thermal spraying — Wires, rods and cords for flame
and arc spraying — Classification — Technical supply
conditions
Projection thermique — Fils, baguettes et cordons pour projection thermique à l'arc et au pistolet dans une
flamme — Classification — Conditions techniques d'approvisionnement
ICS: 25.220.20
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 14919:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
© ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022
---------------------- Page: 4 ----------------------
oSIST prEN ISO 14919:2023
ISO/DIS 14919:2022(E)
Contents Page
Foreword .iv
Introduction .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.