SIST EN ISO 12215-5:2008/A1:2014

Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination - Amendment 1 (ISO 12215-5:2008/Amd 1:2014)

This part of ISO 12215 applies to the determination of design pressures and stresses, and to the determination of the scantlings, including internal structural members of monohull small craft constructed from fibre-reinforced plastics, aluminium or steel alloys, glued wood or other suitable boat building material, with a length of hull, LH, in accordance with ISO 8666, between 2,5 m and 24 m. It only applies to boats in the intact condition. It only applies to craft with a maximum speed u 50 knots in mLDC conditions. The assessment shall generally include all parts of the craft that are assumed watertight or weathertight when assessing stability, freeboard and buoyancy in accordance with ISO 12217 and are essential to the safety of the craft and of persons on board.

Kleine Wasserfahrzeuge - Rumpfbauweise und Dimensionierung - Teil 5: Entwurfsdrücke für Einrumpffahrzeuge, Entwurfsspannungen, Ermittlung der Dimensionierung - Änderung 1 (ISO 12215-5:2008/Amd 1:2014)

Petits navires - Construction de coques et échantillonnage - Partie 5: Pressions de conception pour monocoques, contraintes de conception, détermination de l'échantillonnage - Amendement 1 (ISO 12215-5:2008/Amd 1:2014)

Mala plovila - Konstrukcija trupa in zahtevane lastnosti - 5. del: Načrtovani tlaki za trupe, načrtovane napetosti in določanje lastnosti - Dopolnilo 1 (ISO 12215-5:2008/Amd 1:2014)

Ta del standarda ISO 12215 se uporablja za določanje načrtovanih tlakov in napetosti ter za določanje lastnosti, vključno z notranjimi strukturnimi pripadniki malih plovil z enim trupom, izdelanih iz z vlakni ojačenih polimernih materialov, aluminija ali jeklenih zlitin, zlepljenega lesa ali drugega ustreznega materiala za gradnjo plovil, z dolžino trupa (LH) v skladu s standardom ISO 8666 med 2,5 m in 24 m. Uporablja se le za plovila v brezhibnem stanju. Uporablja se le za plovila z najvišjo hitrostjo 50 vozlov v pogojih mLDC. Ocena običajno zajema vse dele plovila, ki se štejejo za vodoodporne ali odporne na vremenske vplive, ko se ocenjujejo stabilnost, nadvodje in vzgon v skladu s standardom ISO 12217, ter so bistveni za varnost plovila in ljudi na krovu.

General Information

• Status: Withdrawn
• Public Enquiry End Date: 24-Dec-2012
• Publication Date: 02-Sep-2014
• Withdrawal Date: 04-Oct-2018
• ICS: 47.020.10 - Hulls and their structure elements
• ICS: 47.080 - Small craft
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 05-Oct-2018
• Due Date: 28-Oct-2018
• Completion Date: 05-Oct-2018
• Directive: 2003/44/EC - Approximation of the laws, regulations and administrative provisions of the Member States relating to recreational craft
• Directive: 2013/53/EU - Directive 2013/53/EU of the European Parliament and of the Council of 20 November 2013 on recreational craft and personal watercraft and repealing Directive 94/25/EC
• Directive: 94/25/EC - Directive 94/25/EC of the European Parliament and of the Council of 16 June 1994 on the approximation of the laws, regulations and administrative provisions of the Member States relating to recreational craft
• Mandate: M/075 - Revised mandate to CEN for standardization in the field of recreational craft
• Ref Project: EN ISO 12215-5:2008/A1:2014 - Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination - Amendment 1 (ISO 12215-5:2008/Amd 1:2014)

Relations

• Amends: SIST EN ISO 12215-5:2008 - Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination (ISO 12215-5:2008)
• Effective Date: 01-Oct-2014
• Replaced By: SIST EN ISO 12215-5:2018 - Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination (ISO 12215-5:2008,vključno z dopolnilom A1:2014)
• Effective Date: 03-Oct-2018
• Revised: SIST EN ISO 12215-5:2018 - Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination (ISO 12215-5:2008,vključno z dopolnilom A1:2014)
• Effective Date: 07-Jun-2017
• Amends: SIST EN ISO 12215-5:2008 - Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination (ISO 12215-5:2008)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 12215-5:2008/A1:2014
01-oktober-2014
0DODSORYLOD.RQVWUXNFLMDWUXSDLQ]DKWHYDQHODVWQRVWLGHO1DþUWRYDQLWODNL]D
WUXSHQDþUWRYDQHQDSHWRVWLLQGRORþDQMHODVWQRVWL'RSROQLOR,62
$PG
Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls,
design stresses, scantlings determination - Amendment 1 (ISO 12215-5:2008/Amd
1:2014)
Kleine Wasserfahrzeuge - Rumpfbauweise und Dimensionierung - Teil 5:
Entwurfsdrücke für Einrumpffahrzeuge, Entwurfsspannungen, Ermittlung der
Dimensionierung - Änderung 1 (ISO 12215-5:2008/Amd 1:2014)
Petits navires - Construction de coques et échantillonnage - Partie 5: Pressions de
conception pour monocoques, contraintes de conception, détermination de
l'échantillonnage - Amendement 1 (ISO 12215-5:2008/Amd 1:2014)
Ta slovenski standard je istoveten z: EN ISO 12215-5:2008/A1:2014
ICS:
47.020.10 Ladijski trupi in njihovi Hulls and their structure
konstrukcijski elementi elements
47.080 ýROQL Small craft
SIST EN ISO 12215-5:2008/A1:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 12215-5:2008/A1:2014

---------------------- Page: 2 ----------------------

SIST EN ISO 12215-5:2008/A1:2014

EUROPEAN STANDARD
EN ISO 12215-5:2008/A1

NORME EUROPÉENNE

EUROPÄISCHE NORM
July 2014
ICS 47.080
English Version
Small craft - Hull construction and scantlings - Part 5: Design
pressures for monohulls, design stresses, scantlings
determination - Amendment 1 (ISO 12215-5:2008/Amd 1:2014)
Petits navires - Construction de coques et échantillonnage - Kleine Wasserfahrzeuge - Rumpfbauweise und
Partie 5: Pressions de conception pour monocoques, Dimensionierung - Teil 5: Entwurfsdrücke für
contraintes de conception, détermination de Einrumpffahrzeuge, Entwurfsspannungen, Ermittlung der
l'échantillonnage - Amendement 1 (ISO 12215-5:2008/Amd Dimensionierung - Änderung 1 (ISO 12215-5:2008/Amd
1:2014) 1:2014)
This amendment A1 modifies the European Standard EN ISO 12215-5:2008; it was approved by CEN on 28 May 2014.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the
official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12215-5:2008/A1:2014 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 12215-5:2008/A1:2014
EN ISO 12215-5:2008/A1:2014 (E)
Contents Page
Foreword .3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 94/25/EC as amended by Directive 2003/44/EC .4

2

---------------------- Page: 4 ----------------------

SIST EN ISO 12215-5:2008/A1:2014
EN ISO 12215-5:2008/A1:2014 (E)
Foreword
This document (EN ISO 12215-5:2008/A1:2014) has been prepared by Technical Committee ISO/TC 188
“Small craft” in collaboration with CCMC.
This Amendment to the European Standard EN ISO 12215-5:2008 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by January 2015, and
conflicting national standards shall be withdrawn at the latest by January 2015.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 12215-5:2018/Amd 1:2014 has been approved by CEN as EN ISO 12215-5:2008/A1:2014
without any modification.
3

---------------------- Page: 5 ----------------------

SIST EN ISO 12215-5:2008/A1:2014
EN ISO 12215-5:2008/A1:2014 (E)
Annex ZA
(informative)
Relationship between this European Standard and the Essential
Requirements of EU Directive 94/25/EC as amended by Directive
2003/44/EC
This European Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association to provide one means of conforming to Essential Requirements of
the New Approach Directive 94/25/EC as amended by Directive 2003/44/EC.
Once this International Standard is cited in the Official Journal of the European Union under that Directive and
has been implemented as a national standard in at least one Member State, compliance with the normative
clauses of ISO 12215-5 given in Table ZA.1 confers, within the limits of the scope of ISO 12215-5, a
presumption of conformity with the corresponding Essential Requirements of that Directive and associated
EFTA regulations.
Table ZA.1 — Correspondence between this International Standard and Directive 94/25
...

SLOVENSKI STANDARD
SIST EN ISO 12215-5:2008/oprA1:2012
01-december-2012
0DODSORYLOD.RQVWUXNFLMDWUXSDLQ]DKWHYDQHODVWQRVWLGHO1DþUWRYDQLWODNL]D
WUXSHQDþUWRYDQHQDSHWRVWLLQGRORþDQMHODVWQRVWL'RSROQLOR,62
'$0
Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls,
design stresses, scantlings determination - Amendment 1 (ISO 12215-5:2008/DAM
1:2012)
Kleine Wasserfahrzeuge - Rumpfbauweise und Dimensionierung - Teil 5:
Entwurfsdrücke für Einrumpffahrzeuge, Entwurfsspannungen, Ermittlung der
Dimensionierung - Änderung 1 (ISO 12215-5:2008/DAM 1:2012)
Petits navires - Construction de coques et échantillonnage - Partie 5: Pressions de
conception pour monocoques, contraintes de conception, détermination de
l'échantillonnage - Amendement 1 (ISO 12215-5:2008/DAM 1:2012)
Ta slovenski standard je istoveten z: EN ISO 12215-5:2008/prA1
ICS:
47.020.10 Ladijski trupi in njihovi Hulls and their structure
konstrukcijski elementi elements
47.080 ýROQL Small craft
SIST EN ISO 12215-5:2008/oprA1:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 12215-5:2008/oprA1:2012

---------------------- Page: 2 ----------------------

SIST EN ISO 12215-5:2008/oprA1:2012


EUROPEAN STANDARD
DRAFT
EN ISO 12215-5:2008
NORME EUROPÉENNE

EUROPÄISCHE NORM
prA1
October 2012
ICS 47.020.10; 47.080
English Version
Small craft - Hull construction and scantlings - Part 5: Design
pressures for monohulls, design stresses, scantlings
determination - Amendment 1 (ISO 12215-5:2008/DAM 1:2012)
Petits navires - Construction de coques et échantillonnage - Kleine Wasserfahrzeuge - Rumpfbauweise und
Partie 5: Pressions de conception pour monocoques,
Dimensionierung - Teil 5: Entwurfsdrücke für
contraintes de conception, détermination de Einrumpffahrzeuge, Entwurfsspannungen, Ermittlung der
l'échantillonnage - Amendement 1 (ISO 12215-5:2008/DAM Dimensionierung - Änderung 1 (ISO 12215-5:2008/DAM
1:2012) 1:2012)
This draft amendment is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee CEN/SS T01.

This draft amendment A1, if approved, will modify the European Standard EN ISO 12215-5:2008. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12215-5:2008/prA1:2012: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 12215-5:2008/oprA1:2012
EN ISO 12215-5:2008/prA1:2012 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 12215-5:2008/oprA1:2012
EN ISO 12215-5:2008/prA1:2012 (E)
Foreword
This document (EN ISO 12215-5:2008/prA1:2012) has been prepared by Technical Committee ISO/TC 188
"Small craft" in collaboration with CCMC.
This document is currently submitted to the parallel Enquiry.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
Endorsement notice
The text of ISO 12215-5:2008/DAM 1:2012 has been approved by CEN as a EN ISO 12215-5:2008/prA1:2012
without any modification.
3

---------------------- Page: 5 ----------------------

SIST EN ISO 12215-5:2008/oprA1:2012

---------------------- Page: 6 ----------------------

SIST EN ISO 12215-5:2008/oprA1:2012

DRAFT AMENDMENT ISO 12215-1:2008/DAM 1
ISO/TC 188 Secretariat: SIS
Voting begins on Voting terminates on

2012-10-04 2013-03-04
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION    МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ    ORGANISATION INTERNATIONALE DE NORMALISATION


Small craft — Hull construction and scantlings —
Part 5:
Design pressures for monohulls, design stresses, scantlings
determination
AMENDMENT 1
Petits navires — Construction de coques et échantillonnage —
Partie 5: Pressions de conception pour monocoques, contraintes de conception, détermination de
l'échantillonnage
AMENDEMENT 1

ICS 47.080


ISO/CEN PARALLEL PROCESSING
This draft has been developed within the International Organization for Standardization (ISO), and
processed under the ISO-lead mode of collaboration as defined in the Vienna Agreement.
This draft is hereby submitted to the ISO member bodies and to the CEN member bodies for a parallel
five-month enquiry.
Should this draft be accepted, a final draft, established on the basis of comments received, will be
submitted to a parallel two-month approval vote in ISO and formal vote in CEN.


To expedite distribution, this document is circulated as received from the committee
secretariat. ISO Central Secretariat work of editing and text composition will be undertaken at
publication stage.
Pour accélérer la distribution, le présent document est distribué tel qu'il est parvenu du
secrétariat du comité. Le travail de rédactio
...