SIST EN 3278:2012

Aerospace series - Sleeves, tubular, protruding head, in corrosion resisting steel, passivated (0,25 mm wall thickness)

This European Standard specifies the characteristics and technical requirements for protruding head tubular sleeves, in corrosion resisting steel, which may be plain or provided with a series of annular grooves.
They are for use in aerospace assemblies whose maximum operating temperature does not exceed 650 °C.

Luft- und Raumfahrt - Hülsen, überstehender Kopf, aus korrosionsbeständigem Stahl, passiviert (Wanddicke 0,25 mm)

Diese Norm legt die Merkmale von und technischen Anforderungen an Hülsen aus korrosionsbeständigem Stahl, mit überstehendem Kopf fest, die glatt oder mit einer Reihe Ringnuten versehen sein können.
Sie sind für Baugruppen bestimmt, die in der Luft- und Raumfahrt eingesetzt werden und deren höchste Betriebstemperatur 650 °C nicht überschreitet.

Série aérospatiale - Douilles tubulaires, tête saillante en acier résistant à la corrosion, passivé (Épaisseur de paroi 0,25 mm)

Aeronavtika - Obojke, cevaste, štrleče glave, iz korozijsko odpornega jekla, pasivirane (debelina stene 0,25 mm)

Ta evropski standard določa značilnosti in tehnične zahteve za cevaste odbojke s štrlečo glavo iz korozijsko odpornega jekla, ki so lahko navadne ali opremljene s serijo obročastih utorov. Namenjene so za uporabo v aeronavtičnih sestavih, kjer največja obratovalna temperatura ne presega 650 °C.

General Information

• Status: Withdrawn
• Publication Date: 27-Mar-2012
• Withdrawal Date: 03-Nov-2019
• ICS: 49.030.99 - Other fasteners
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 04-Nov-2019
• Due Date: 27-Nov-2019
• Completion Date: 04-Nov-2019
• Ref Project: EN 3278:2012 - Aerospace series - Sleeves, tubular, protruding head, in corrosion resisting steel, passivated (0,25 mm wall thickness)

Relations

• Replaced By: SIST EN 3278:2020 - Aerospace series - Sleeves, tubular, protruding head, in corrosion resisting steel, passivated (0,25 mm wall thickness)
• Effective Date: 30-Oct-2019
• Replaced By: SIST EN 3278:2020 - Aerospace series - Sleeves, tubular, protruding head, in corrosion resisting steel, passivated (0,25 mm wall thickness)
• Effective Date: 08-Jun-2022
• Revised: SIST EN 3278:2020 - Aerospace series - Sleeves, tubular, protruding head, in corrosion resisting steel, passivated (0,25 mm wall thickness)
• Effective Date: 04-Feb-2015

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Hülsen, überstehender Kopf, aus korrosionsbeständigem Stahl, passiviert (Wanddicke 0,25 mm)Série aérospatiale - Douilles tubulaires, tête saillante en acier résistant à la corrosion, passivé (Épaisseur de paroi 0,25 mm)Aerospace series - Sleeves, tubular, protruding head, in corrosion resisting steel, passivated (0,25 mm wall thickness)49.030.99Drugi vezni elementiOther fastenersICS:Ta slovenski standard je istoveten z:EN 3278:2012SIST EN 3278:2012en,de01-maj-2012SIST EN 3278:2012SLOVENSKI
STANDARD



SIST EN 3278:2012



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3278
March 2012 ICS 49.030.99 English Version
Aerospace series - Sleeves, tubular, protruding head, in corrosion resisting steel, passivated (0,25 mm wall thickness)
Série aérospatiale - Douilles tubulaires, tête saillante en acier résistant à la corrosion, passivé (Èpaisser de paroi 0,25 mm)
Luft- und Raumfahrt - Hülsen, überstehender Kopf, aus korrosionsbeständigem Stahl, passiviert (Wanddicke 0,25 mm) This European Standard was approved by CEN on 24 August 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3278:2012: ESIST EN 3278:2012



EN 3278:2012 (E) 2 Contents Page Foreword . 31 Scope . 42 Normative references . 43 Definitions . 44 Required characteristics . 44.1 Configuration — Dimensions — Tolerances . 44.2 Surface roughness . 44.3 Material . 44.4 Surface treatment . 45 Designation . 76 Marking. 77 Technical requirements . 77.1 Manufacture . 77.2 Surface appearance . 77.3 Sampling . 7 SIST EN 3278:2012



EN 3278:2012 (E) 3 Foreword This document (EN 3278:2012) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national sta
...