Aerospace series - Clamps, loop ("P" type) in corrosion resisting steel, passivated with rubber cushioning - Dimensions, masses

This document specifies the required characteristics of loop style clamps ("P" type) in corrosion resisting steel, passivated with various cushion materials.
These clamps are used for supporting aerospace pipe assemblies and electrical cable bundles.
For temperature range and environmental considerations see the various cushion material standards.

Luft- und Raumfahrt - Schellen in Schlaufenform (P-Form) aus korrosionsbeständigem Stahl, passiviert mit Profilgummi - Maße, Massen

This document specifies the required characteristics of loop style clamps ("P" type) in corrosion resisting steel, passivated with various cushion materials.
These clamps are used for supporting aerospace pipe assemblies and electrical cable bundles.
For temperature range and environmental considerations see the various cushion material standards.

Série aérospatiale - Colliers, boucle en P en acier résistant à la corrosion, passivés avec profilé en élastomère - Dimensions, masses

Le présent document spécifie les caractéristiques requises pour les colliers à boucle en P, en acier résistant à la corrosion, passivés avec différents matériaux pour les profilés (garnitures).
Ces colliers sont utilisés pour maintenir les tuyauteries et les faisceaux de câbles électriques à usage aérospatial.
Pour les plages de températures et les conditions environnementales, voir les normes des différents matériaux pour les profilés

Aeronavtika - Objemke v obliki zanke (P-oblika) iz korozijsko odpornega jekla, pasivirane, z zaščitno prevleko iz gume - Mere, mase

Ta dokument določa zahtevane značilnosti objemk v obliki zanke (P-oblika) iz korozijsko odpornega jekla, pasiviranega s prevlekami iz različnih materialov.
Te objemke se uporabljajo za podporo aeronavtičnih cevnih sklopov in snopov električnih kablov.
Za temperaturno območje in okoljske vidike glej standarde o prevlekah iz različnih materialov.

General Information

Status
Published
Public Enquiry End Date
14-Sep-2022
Publication Date
15-Jan-2024
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
03-Jan-2024
Due Date
09-Mar-2024
Completion Date
16-Jan-2024

Relations

Buy Standard

Standard
EN 4113:2024
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 4113:2024
01-februar-2024
Aeronavtika - Objemke v obliki zanke (P-oblika) iz korozijsko odpornega jekla,
pasivirane, z zaščitno prevleko iz gume - Mere, mase
Aerospace series - Clamps, loop ("P" type) in corrosion resisting steel, passivated with
rubber cushioning - Dimensions, masses
Luft- und Raumfahrt - Schellen in Schlaufenform (P-Form) aus korrosionsbeständigem
Stahl, passiviert mit Profilgummi - Maße, Massen
Série aérospatiale - Colliers, boucle en P en acier résistant à la corrosion, passivés avec
profilé en élastomère - Dimensions, masses
Ta slovenski standard je istoveten z: EN 4113:2023
ICS:
49.030.99 Drugi vezni elementi Other fasteners
SIST EN 4113:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 4113:2024

---------------------- Page: 2 ----------------------
SIST EN 4113:2024


EN 4113
EUROPEAN STANDARD

NORME EUROPÉENNE

December 2023
EUROPÄISCHE NORM
ICS 49.030.99 Supersedes EN 4113:2009
English Version

Aerospace series - Clamps, loop ("P" type) in corrosion
resisting steel, passivated with rubber cushioning -
Dimensions, masses
Série aérospatiale - Colliers, boucle en P en acier Luft- und Raumfahrt - Schellen in Schlaufenform (P-
résistant à la corrosion, passivés avec profilé en Form) aus korrosionsbeständigem Stahl, passiviert mit
élastomère - Dimensions, masses Profilgummi - Maße, Massen
This European Standard was approved by CEN on 15 October 2023.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4113:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 4113:2024
EN 4113:2023 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Required characteristics . 5
4.1 Materials . 5
4.2 Surface treatment . 5
4.3 Configuration – Dimensions – Masses . 5
5 Designation . 10
6 Marking . 10
7 Technical specification . 10


2

---------------------- Page: 4 ----------------------
SIST EN 4113:2024
EN
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.