iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

oSIST prEN 13203-1:2024

(Main)

Gas fired domestic appliances producing hot water - Part 1: Assessment of performance of hot water deliveries

Gas fired domestic appliances producing hot water - Part 1: Assessment of performance of hot water deliveries

This document is applicable to gas-fired appliances producing domestic hot water. It applies to both instantaneous and storage appliances; water-heaters and combination boilers that have:
-   heat input not exceeding 70 kW; and
-   hot water storage capacity (if any) not exceeding 500 l.
In the case of combination boilers, with or without storage tank, domestic hot water production is integrated or coupled, the whole being marketed as a single unit.
This document sets out in qualitative and quantitative terms the performance in delivery of domestic hot water for a selected variety of uses. It also gives a system for presenting the information to the user.

Gasbeheizte Geräte für die sanitäre Warmwasserbereitung für den Hausgebrauch - Teil 1: Bewertung der Leistung der Warmwasserbereitung

Dieses Dokument gilt für gasbeheizte Geräte für die sanitäre Warmwasserbereitung. Sie gilt sowohl für Durchlauf- als auch für Vorrats-Wasserheizer sowie Kombi-Kessel mit:
-  einer Wärmebelastung von höchstens 70 kW; und
-  einem Warmwasser-Speichervolumen (sofern vorhanden) von höchstens 500 l.
Bei Kombi-Kesseln mit oder ohne Speicher ist die sanitäre Warmwasserbereitung in den Kessel eingebaut oder an den Kessel angebaut, wobei das gesamte Gerät als eine Gesamteinheit vertrieben wird.
Dieser Dokumentensatz legt mehrere quantitative und qualitative Komfortklassen für die sanitäre Warmwasserbereitung für eine Auswahl von Benutzungsarten fest. Er enthält außerdem ein System zur Bereitstellung von Angaben für den Benutzer.

Appareils domestiques produisant de l'eau chaude sanitaire utilisant les combustibles gazeux - Partie 1 : Évaluation de la performance en puisage d'eau chaude

Le présent document s’applique aux appareils de production d’eau chaude sanitaire utilisant les combustibles gazeux. Il s’applique à la fois aux appareils instantanés ou à accumulation, chauffe-eau ou chaudières à deux services, qui ont :
-  un débit calorifique inférieur ou égal à 70 kW ; et
-  une capacité de stockage en eau chaude (si elle existe) inférieure ou égale à 500 l.
Dans le cas des chaudières à deux services avec ou sans ballon, la production d’eau chaude sanitaire est intégrée ou accolée, l’ensemble étant commercialisé comme une seule unité.
Le présent document définit en termes qualitatifs et quantitatifs la performance en puisage d’eau chaude sanitaire pour une variété d’usages sélectionnée. Il fournit également un système pour présenter les informations à l’utilisateur.

Plinske gospodinjske naprave za pripravo tople sanitarne vode - 1. del: Ocenjevanje zmogljivosti priprave tople vode

General Information

Status
Not Published
Public Enquiry End Date
02-Mar-2024
ICS
91.140.65 - Water heating equipment
Technical Committee
PLN - Gas appliances for domestic use
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
11-Jan-2024
Due Date
30-May-2024
Completion Date
14-May-2024
Directive
814/2013 - Commission Regulation (EU) No 814/2013 of 2 August 2013 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for water heaters and hot water storage tanks
Mandate
M/534 - [C(2015)2625] Standardisation request to the European standardisation organisations pursuant to Article 10(1) of Regulation (EU) No 1025/2012 of the European Parliament and of the Council in support of implementation of Commission Regulation (EU) No 814/2013 of 2 August 2013 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for water heaters and hot water storage tanks and Commission Delegated Regulation (EU) No 812/2013 of 18 February 2013 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to the energy labelling of water heaters, hot water storage tanks and packages of water heater and solar device
Ref Project
prEN 13203-1 - Gas fired domestic appliances producing hot water - Part 1: Assessment of performance of hot water deliveries

Relations

Revises
SIST EN 13203-1:2015 - Gas fired domestic appliances producing hot water - Part 1: Assessment of performance of hot water deliveries
Effective Date
01-Feb-2024

Buy Standard

prEN 13203-1:2024prEN 13203-1:2024
PreviousNext
Draft
prEN 13203-1:2024
English language
35 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 13203-1:2024
01-februar-2024
Plinske gospodinjske naprave za pripravo tople sanitarne vode - 1. del:
Ocenjevanje zmogljivosti priprave tople vode
Gas fired domestic appliances producing hot water - Part 1: Assessment of performance
of hot water deliveries
Gasbeheizte Geräte für die sanitäre Warmwasserbereitung für den Hausgebrauch - Teil
1: Bewertung der Leistung der Warmwasserbereitung
Appareils domestiques produisant de l'eau chaude sanitaire utilisant les combustibles
gazeux - Partie 1 : Évaluation de la performance en puisage d'eau chaude
Ta slovenski standard je istoveten z: prEN 13203-1
ICS:
91.140.65 Oprema za ogrevanje vode Water heating equipment
oSIST prEN 13203-1:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 13203-1:2024

---------------------- Page: 2 ----------------------
oSIST prEN 13203-1:2024


DRAFT
EUROPEAN STANDARD
prEN 13203-1
NORME EUROPÉENNE

EUROPÄISCHE NORM

February 2024
ICS 91.140.65 Will supersede EN 13203-1:2015
English Version

Gas fired domestic appliances producing hot water - Part
1: Assessment of performance of hot water deliveries
Appareils domestiques produisant de l'eau chaude Gasbeheizte Geräte für die sanitäre
sanitaire utilisant les combustibles gazeux - Partie 1 : Warmwasserbereitung für den Hausgebrauch - Teil 1:
Évaluation de la performance en puisage d'eau chaude Bewertung der Leistung der Warmwasserbereitung
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 109.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13203-1:2024 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 13203-1:2024
prEN 13203-1:2024 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 General test conditions . 7
4.1 Reference conditions . 7
4.2 Measurement uncertainties . 7
4.3 Test conditions . 8
4.3.1 General . 8
4.3.2
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 13203-4:2022(Main)
Gas-fired domestic appliances producing hot water - Part 4: Assessment of energy consumption of gas combined heat and power appliances (mCHP) producing hot water and electricity
EN 13203-4:2022

This document is applicable to gas-fired mCHP appliances producing domestic hot water and electricity. The electricity is generated in a process linked to the production of useful heat.
It applies to a mCHP appliances marketed as single unit or as a package fully specified by a manufacturer that have:
-   a gas heat input not exceeding 400 kW,
-   an electrical output not exceeding 50 kW, and
-   a hot water storage capacity (if any) not exceeding 2 000 l.
EN 13203 1:2015 sets out in qualitative and quantitative terms the performance in delivery of domestic hot water for a variety of uses. It also gives a system for presenting the information to the user.
The present document sets out a method for assessing the energy performance of gas fired mCHP appliances. It defines a number of daily tapping cycles for each domestic hot water use, kitchen, shower, bath and a combination of these, together with corresponding test procedures, enabling the energy performances of different gas-fired appliances to be compared and matched to the needs of the user.
When the mCHP generator does not supply domestic hot water in the summer period, the present standard is not applicable. FprEN 13203 2:2018 is used for performance assessment of these generators.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13203-5:2022(Main)
Gas-fired domestic appliances producing hot water - Part 5: Assessment of energy consumption of gas-fired appliances combined with electrical heat pump
EN 13203-5:2022

This European Standard is applicable to gas-fired mCHP appliances producing domestic hot water and electricity. The electricity is generated in a process linked to the production of useful heat. It applies to a mCHP appliances marketed as single unit or as a package fully specified by a manufacturer that have:
— a gas heat input not exceeding 400 kW;
— an electrical output not exceeding 50 kW and
— a hot water storage capacity (if any) not exceeding 2000 l.
prEN 13203-1:20xx sets out in qualitative and quantitative terms the performance in delivery of domestic hot water for a variety of uses. It also gives a system for presenting the information to the user.
The present document sets out a method for assessing the energy performance of gas fired mCHP appliances. It defines a number of daily tapping cycles for each domestic hot water use, kitchen, shower, bath and a combination of these, together with corresponding test procedures, enabling the energy performances of different gas-fired appliances to be compared and matched to the needs of the user.
When the mCHP generator does not supply domestic hot water in the summer period, the present standard is not applicable. PrEN 13203-2:2020 is used for performance assessment of these generators.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13203-6:2022(Main)
Gas-fired domestic appliances producing hot water - Part 6: Assessment of energy consumption of adsorption and absorption heat pumps
EN 13203-6:2022

Sorption heat pumps connected to or including a domestic hot water storage tank. It applies to a package marketed as single unit or fully specified that have:
— a heat input not exceeding 400 kW; and
— a hot water storage tank capacity (if any) not exceeding 2000 l.
In the case of combination boilers, with or without storage tank, domestic hot water production is integrated or coupled, the whole being marketed as a single unit.
EN 13203-1 sets out in qualitative and quantitative terms the performance in delivery of domestic hot water for a selected variety of uses. It also gives a system for presenting the information to the user. The present document sets out a method for assessing the energy performance of the appliances. It defines a number of daily load profiles for each domestic hot water use, kitchen, shower, bath and a combination of these, together with corresponding test procedures, enabling the energy performances of different gas-fired appliances to be compared and matched to the needs of the user. Where other technologies are combined with a gas-fired boiler or a water heater to produce domestic hot water, specific parts of EN 13203 apply.
Horizontal ground heat sources are not covered by the scope of the present European Standard.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13203-3:2022(Main)
Gas-fired domestic appliances producing hot water - Part 3: Assessment of energy consumption of solar supported gas-fired appliances
EN 13203-3:2022

This document is applicable to solar supported gas-fired appliances producing domestic hot water.
It applies to a system marketed as single unit or a fully specified system that:
- has a gas heat input not exceeding 70 kW; and
- has a hot water storage tank capacity not exceeding 500 l; and
- is equipped with at least one solar collector; and
- is, with regard to the solar hydraulic circuit, considered as a forced circulation system (definition according to EN ISO 9488:1999).
The appliances covered by this European Standard are described in Annex E (normative).
This document does not apply to thermo-siphon or integral collector storage tank systems according to definitions given by EN ISO 9488:1999.
NOTE In principle, the energy consumption of thermo-siphon solar preheat systems and integral collector storage tank preheat systems can also be assessed on the basis of this standard. One appropriate procedure for that purpose is to calculate the temperature level of the domestic hot water withdrawn from the thermal solar system for the reference conditions defined in this standard by using the numerical system model and the thermal solar system performance parameters according to ISO 9459-5. Based on the temperature level of the hot water withdrawn from the store the energy consumption of the gas appliance should be determined. This determination can either be done by means of calculations or by performing a test according to FprEN 13203-2:2020 and using instead of the cold water inlet temperature the hot water temperature withdrawn from the store.
This document is not intended to assess the performance:
- of the solar collector(s), which should comply with EN 12975-1:+A1:2010 and EN 12975-2:2006; and - thermal solar systems and components, which should comply with EN 12976-1:2017 and EN 12976- 2:2019.
Standard EN 13203-1:2015 sets out in qualitative and quantitative terms the performance in delivery of domestic hot water for a selected variety of uses. It also gives a presenting the information to the user. The present document sets out a method for assessing the energy performance of a solar supported appliance. It defines a number of daily tapping cycles for each domestic hot water use, kitchen, shower, bath and a combination of these, together with corresponding test procedures including information about the available solar radiation. It enables the energy performances of different gas-fired appliances to be compared and matched to the needs of the user.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13203-2:2022(Main)
Gas-fired domestic appliances producing hot water - Part 2: Assessment of energy consumption
EN 13203-2:2022

This document is applicable to gas-fired appliances producing domestic hot water.
It applies to both instantaneous and storage tank appliances; waters-heaters and combination boilers that have:
— a heat input not exceeding 400 kW; and
— a hot water storage tank capacity (if any) not exceeding 2000 l.
In the case of combination boilers, with or without storage tank, domestic hot water production is integrated or coupled, the whole being marketed as a single unit.
The water heaters covered by the present standard are considered "conventional water heaters" as defined by the Transitional Methods (Commission Communication 2014/C 207/03) then in the calculation formula for the Annual Electricity Consumption (AEC), Qcor is equal to zero.
EN 13203-1 sets out in qualitative and quantitative terms the performance in delivery of domestic hot water for a selected variety of uses. It also gives a system for presenting the information to the user. The present document sets out a method for assessing the energy performance of the appliances. It defines a number of daily load profiles for each domestic hot water use, kitchen, shower, bath and a combination of these, together with corresponding test procedures, enabling the energy performances of different gas-fired appliances to be compared and matched to the needs of the user. Where other technologies are combined with a gas-fired boiler or a water heater to produce domestic hot water, specific parts of EN 13203 apply.

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13203-7:2022(Main)
Gas-fired domestic appliances producing hot water - Part 7: Assessment of energy consumption of combination boilers equipped with a passive flue heat recovery device
EN 13203-7:2022

This European Standard is applicable to gas-fired appliances producing domestic hot water. It applies to
condensing combination boilers with passive flue heat recovery device (PFHRD) that have:
— a heat input not exceeding 400 kW,
— a hot water storage tank capacity (if any) not exceeding 2000 l,
— a declared load profile between M to 4XL.
In the case of combination boilers, with or without storage tank, domestic hot water production is integrated
or coupled, the whole being marketed as a single unit.
For this standard, some tests and calculation results of FprEN 13203-2:2018 are used to calculate the energy consumptions.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15332:2020(Main)
Heating boilers - Energy assessment of hot water storage tanks
EN 15332:2019

This European Standard specifies a method for energy assessment of un-vented (closed) hot water storage tanks with a capacity up to 1 500 l, intended to be equipped with an external heat source and used for domestic hot water production. Whilst storage water heaters intended primarily for direct heating are not covered by this European Standard, it does allow the provision of electric heating elements for auxiliary use.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 303-6:2019(Main)
Heating boilers - Part 6: Heating boilers with forced draught burners - Specific requirements for the domestic hot water operation and energy performance of water heaters and combination boilers with atomizing oil burners of nominal heat input not exceeding 70 kW
EN 303-6:2019

This European Standard is composed of two parts.
The first part supplements EN 303 1, EN 303 2, EN 303 4 and EN 304 hereafter called boiler standards. It specifies the supplementary requirements and tests for the construction, safety, rational use of energy, fitness for purpose, classification and marking related to the domestic hot water operation of oil fired water heaters and combination boilers.
The domestic hot water is produced on either the instantaneous or storage principle. The domestic hot water production is integrated or coupled, the whole being marketed as a single unit.
The second part covers the energy performance of domestic hot water production of the appliances covered by the first part.
This second part sets out a method for assessing the energy performance of the appliances. It defines a number of daily tapping cycles for each domestic hot water use such as kitchen, shower, bath and a combination of these, together with corresponding test procedures, enabling the energy performances of combination boilers and water heaters to be compared and matched to the needs of the user.
The heat output of the appliances covered by this standard does not exceed 400 kW.
In the case of combination boilers, with or without storage tank, domestic hot water production is integrated or coupled, the whole being marketed as a single unit.
This standard only covers type testing.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13203-1:2015(Main)
Gas fired domestic appliances producing hot water - Part 1: Assessment of performance of hot water deliveries
EN 13203-1:2015

This document is applicable to gas-fired appliances producing domestic hot water. It applies to both instantaneous and storage appliances; water-heaters and combination boilers that have:
-   heat input not exceeding 70 kW; and
-   hot water storage capacity (if any) not exceeding 500 l.
In the case of combination boilers, with or without storage tank, domestic hot water production is integrated or coupled, the whole being marketed as a single unit.
The present document sets out in qualitative and quantitative terms the performance in delivery of domestic hot water for a selected variety of uses. It also gives a system for presenting the information to the user.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 89:2015(Main)
Gas-fired storage water heaters for the production of domestic hot water
EN 89:2015

This European Standard defines the specifications and test methods for the construction, safety, rational use
of energy and fitness for purpose, environment and classification and marking of gas-fired storage water
heaters for domestic hot water uses, hereafter called “appliance”.
This European Standard applies to appliances:
— of selected types B1, B2, B3, B5, C1, C2, C3, C4, C5, C6, C7, C8, C9 according to CEN/TR 1749;
— fitted with atmospheric burners;
— using one or more combustible gases corresponding to the three gas families and the pressures indicated
in EN 437;
— of nominal heat input not exceeding 150 kW (net calorific value);
— fitted with electrically operated mechanical flue dampers that are positioned downstream of the heat
exchanger.

  • Standard
    159 pages
    English language
    sale 10% off
    e-Library read for
    1 day